Difficulty: Medium
Input speed is 3,000 rpm through a 4:1 reduction. Output speed?
A 600 rpm
B 1,000 rpm
C 1,200 rpm
D 750 rpm
Answer: D. 750 rpm. Output speed=input speed/ratio=3,000/4=750 rpm.
Input torque is 100 N·m, ratio 3.5:1, efficiency 90%. Output torque?
A 250 N·m
B 315 N·m
C 350 N·m
D 390 N·m
Answer: B. 315 N·m. Output torque≈100×3.5×0.90=315 N·m.
A 20-tooth pinion drives a 60-tooth gear. Speed ratio?
A 2:1 reduction
B 3:1 reduction
C 1:3 reduction
D 4:1 reduction
Answer: B. 3:1 reduction. Driven-to-driver tooth ratio is 60/20=3, giving a 3:1 reduction.
Transmission ratio is 2.5:1 and final drive 4:1. Overall reduction?
A 6.5:1
B 8:1
C 10:1
D 2.5:1
Answer: C. 10:1. Overall ratio is the product 2.5×4=10:1.
Engine speed is 2,400 rpm, gearbox ratio 2.5:1, final drive 4:1. Wheel speed?
A 300 rpm
B 240 rpm
C 600 rpm
D 960 rpm
Answer: B. 240 rpm. Overall reduction is 10:1, so wheel speed is 2,400/10=240 rpm.
At 240 rpm, wheel radius is 0.30 m. Vehicle speed?
A 3.77 m/s
B 9.05 m/s
C 7.54 m/s
D 15.08 m/s
Answer: C. 7.54 m/s. Speed=2πr×240/60≈7.54 m/s.
Two reductions are 3:1 and 2:1 in series. Overall ratio?
A 6:1
B 5:1
C 3:1
D 1.5:1
Answer: A. 6:1. Series reduction ratios multiply: 3×2=6:1.
A transmission takes 50 kW and is 90% efficient. Output power?
A 45 kW
B 40 kW
C 50 kW
D 55.6 kW
Answer: A. 45 kW. Output power=50×0.90=45 kW.
A 50 kW input produces 45 kW output. Power loss?
A 4.5 kW
B 9 kW
C 10 kW
D 5 kW
Answer: D. 5 kW. Loss=input−output=50−45=5 kW.
At 30 kW and 1,500 rpm, input torque is closest to?
A 95.5 N·m
B 286 N·m
C 191 N·m
D 382 N·m
Answer: C. 191 N·m. T=P/ω=30,000/(2π×1,500/60)≈191 N·m.
Impeller speed is 2,000 rpm and turbine speed 1,800 rpm. Converter slip?
A 5%
B 20%
C 90%
D 10%
Answer: D. 10%. Slip=(2,000−1,800)/2,000=10%.
An overdrive ratio is 0.80:1. Output speed relative to input?
A 0.80 times
B 0.20 times
C 1.25 times
D 1.80 times
Answer: C. 1.25 times. With ratio=input/output=0.80, output speed=input/0.80=1.25 times input.
Ring gear has 41 teeth and pinion 10 teeth. Final-drive ratio?
A 4.1:1
B 3.1:1
C 5.1:1
D 10:1
Answer: A. 4.1:1. Final-drive ratio=41/10=4.1:1.
Gearbox efficiency is 95% and final-drive efficiency 90%. Combined efficiency?
A 85.5%
B 90%
C 95%
D 105%
Answer: A. 85.5%. Combined efficiency=0.95×0.90=0.855, or 85.5%.
A 4:1 reduction receives 160 N·m at 92% efficiency. Output torque?
A 640 N·m
B 368 N·m
C 736 N·m
D 589 N·m
Answer: D. 589 N·m. Output torque=160×4×0.92=588.8 N·m.
Wheel torque is 720 N·m and tire radius 0.30 m. Tractive force?
A 1,800 N
B 2,400 N
C 2,160 N
D 3,000 N
Answer: B. 2,400 N. Tractive force=wheel torque/radius=720/0.30=2,400 N.
Output torque is 600 N·m at 100 rpm. Output power?
A 3.14 kW
B 6.28 kW
C 12.6 kW
D 31.4 kW
Answer: B. 6.28 kW. P=Tω=600×2π×100/60≈6.28 kW.
An external gear drives another external gear. Rotation direction?
A Same
B Opposite
C Stationary
D Variable only
Answer: B. Opposite. A single pair of external gears rotates in opposite directions.
An ideal open differential receives 400 N·m total axle torque. Per axle shaft?
A 100 N·m
B 400 N·m
C 200 N·m
D 800 N·m
Answer: C. 200 N·m. An ideal open differential supplies approximately equal torque to both axle shafts.
CVT ratio changes from 2.0:1 to 1.0:1 at fixed input speed. Output speed?
A Doubles
B Halves
C Stays fixed
D Quadruples
Answer: A. Doubles. Output speed is input divided by ratio, so halving the ratio doubles output speed.
An input shaft turns 1,800 rpm and output turns 600 rpm. Reduction ratio?
A 2:1
B 4:1
C 0.33:1
D 3:1
Answer: D. 3:1. Ratio=input speed/output speed=1,800/600=3:1.
A 5:1 reduction carries 80 N·m at 95% efficiency. Output torque?
A 400 N·m
B 304 N·m
C 475 N·m
D 380 N·m
Answer: D. 380 N·m. Output torque=80×5×0.95=380 N·m.
A gear pair has 24 driver teeth and 72 driven teeth. Driven speed is what fraction?
A One third
B One half
C One quarter
D Three times
Answer: A. One third. Speed ratio is inverse tooth ratio: 24/72=1/3.
A 2:1 gearbox reduction gives 2,400 rpm input. Output speed?
A 800 rpm
B 1,200 rpm
C 2,000 rpm
D 4,800 rpm
Answer: B. 1,200 rpm. Output speed=2,400/2=1,200 rpm.
A transmission loses 3 kW from 60 kW input. Efficiency?
A 90%
B 97%
C 95%
D 5%
Answer: C. 95%. Output is 57 kW, so efficiency=57/60=95%.