Difficulty: Easy & Basic
In many front-wheel-drive cars, which package combines gearbox and differential?
A Transfer case
B Rear axle
C Transaxle
D Torque converter
Answer: C. Transaxle. A transaxle combines transmission and differential functions in one front-drive package.
What does a shift fork move in a manual gearbox?
A Radiator fan
B Fuel injector
C Selector sleeve
D Oil pickup
Answer: C. Selector sleeve. A shift fork moves a sleeve or gear to select a ratio.
Why are helical gears common in passenger transmissions?
A No axial thrust
B No lubrication needed
C Reverse rotation only
D Quieter tooth engagement
Answer: D. Quieter tooth engagement. Helical teeth engage gradually and tend to run more quietly than spur teeth.
Which gear type has straight teeth parallel to its axis?
A Spur gear
B Helical gear
C Worm gear
D Hypoid gear
Answer: A. Spur gear. Spur gear teeth are straight and parallel to the shaft axis.
Which gear form changes direction between intersecting shafts?
A Bevel gear
B Spur gear
C Worm gear
D Planet gear
Answer: A. Bevel gear. Bevel gears transmit motion between intersecting shaft axes.
What is the ring gear paired with in a hypoid final drive?
A Sun gear
B Pinion gear
C Clutch plate
D Synchronizer ring
Answer: B. Pinion gear. The pinion meshes with the ring gear to provide final reduction.
Which joint accommodates steering and suspension motion at a driven front wheel?
A Universal joint only
B Tripod stand
C Rigid flange
D Constant-velocity joint
Answer: D. Constant-velocity joint. A CV joint transmits drive smoothly while the wheel steers and moves vertically.
What can a universal joint accommodate in a driveshaft?
A Fuel pressure change
B Coolant expansion
C Angular misalignment
D Gear tooth wear
Answer: C. Angular misalignment. A universal joint transfers torque between shafts that operate at an angle.
What does a torque-converter lockup clutch reduce?
A Fluid-drive slip
B Gearbox oil level
C Final-drive ratio
D Wheelbase length
Answer: A. Fluid-drive slip. Lockup mechanically connects converter input and output to reduce slip losses.
Which torque-converter element redirects returning fluid?
A Stator
B Turbine
C Impeller
D Ring gear
Answer: A. Stator. The stator redirects fluid returning from the turbine to assist torque multiplication.
What does a DCT often do before a shift?
A Change tire pressure
B Stop the engine
C Preselect next gear
D Open the transfer case
Answer: C. Preselect next gear. A dual-clutch transmission can preselect the next ratio on the alternate gear path.
In a belt CVT, what changes the effective running radius?
A Movable pulley sheaves
B Clutch pedal travel
C Final-drive pinion
D Differential lock
Answer: A. Movable pulley sheaves. Changing pulley groove width alters the belt’s effective radius and ratio.
What transmits torque between variable pulleys in a belt CVT?
A Propeller shaft
B Steel belt or chain
C Gear synchronizer
D Torque-converter stator
Answer: B. Steel belt or chain. A reinforced belt or chain connects the variable-diameter pulleys.
What does a low-range transfer-case ratio provide?
A Higher road speed
B Less axle torque
C No front drive
D Higher torque at low speed
Answer: D. Higher torque at low speed. Low range gives a larger reduction for slow, demanding operation.
What can distribute torque between axles in an AWD system?
A Oil filter bypass
B Fuel-pressure regulator
C Radiator thermostat
D Center differential or coupling
Answer: D. Center differential or coupling. AWD systems use a center differential or controlled coupling to distribute drive.
What does a synchronizer baulk ring help prevent?
A Coolant leakage
B Fuel vapor release
C Premature dog engagement
D Bearing lubrication
Answer: C. Premature dog engagement. The baulk ring blocks engagement until rotational speeds approach synchronization.
What do dog teeth do after speeds synchronize?
A Pump oil to bearings
B Change fuel mixture
C Cool gear oil
D Lock gear to shaft
Answer: D. Lock gear to shaft. Dog teeth connect the selected gear to its shaft after synchronization.
Why should transmission fluid meet the specified formulation?
A Protect friction and gear surfaces
B Increase tire grip
C Raise engine octane
D Reduce radiator pressure
Answer: A. Protect friction and gear surfaces. Fluid friction characteristics and protection must match the transmission design.
Which wear pattern can indicate gear-tooth surface fatigue?
A Fuel dilution
B Pitting
C Valve recession
D Tire cupping
Answer: B. Pitting. Repeated contact stress can cause small pits on gear tooth surfaces.
What may a whine that changes with selected gear indicate?
A Low coolant concentration
B Gear or bearing wear
C Fuel cap leak
D Brake pad glazing
Answer: B. Gear or bearing wear. A ratio-dependent whine can point to gear-mesh or bearing problems.
Why use a hypoid gearset in many rear axles?
A Eliminates final reduction
B Allows offset shaft axes
C Uses no lubricant
D Connects front wheels only
Answer: B. Allows offset shaft axes. Hypoid gears transmit drive between offset, nonintersecting axes.
What does a gearbox breather help equalize?
A Fuel rail pressure
B Internal air pressure
C Coolant temperature
D Wheel speed
Answer: B. Internal air pressure. A breather allows air movement as internal temperature and pressure change.
What may low transmission-fluid level cause?
A Higher engine compression
B More tire traction
C Lower fuel octane
D Poor hydraulic operation
Answer: D. Poor hydraulic operation. Low fluid can impair lubrication and hydraulic functions in automatic transmissions.
Why can gear oil contain extreme-pressure additives?
A Increase coolant boiling point
B Improve fuel atomization
C Protect loaded tooth contacts
D Reduce tire rolling loss
Answer: C. Protect loaded tooth contacts. EP additives help protect heavily loaded gear teeth under boundary conditions.
Which support carries rotating transmission shafts?
A Radiator hose
B Bearing
C Fuel rail
D Brake booster
Answer: B. Bearing. Bearings support shafts and control their rotation and alignment.