Difficulty: Easy & Basic
What is the primary role of a transmission?
A Match engine speed and torque
B Filter engine oil
C Cool the radiator
D Steer the front wheels
Answer: A. Match engine speed and torque. A transmission varies the speed and torque delivered to the drive wheels.
Which forward gear usually provides the greatest reduction?
A Top gear
B Overdrive
C Neutral
D First gear
Answer: D. First gear. First gear commonly provides a large reduction for starting and climbing.
What happens to engine drive in neutral?
A Output reverses direction
B Maximum reduction engages
C No gear drive to output
D Differential locks fully
Answer: C. No gear drive to output. Neutral disconnects the selected gear path from driving the output.
Which gear selection reverses output rotation?
A First gear
B Overdrive
C Neutral
D Reverse gear
Answer: D. Reverse gear. A reverse gear train changes the direction of output rotation.
Why do road vehicles use multiple ratios?
A Increase tire diameter
B Suit varied speeds and loads
C Reduce fuel tank size
D Eliminate final drive
Answer: B. Suit varied speeds and loads. Different ratios help keep the engine useful across varying speeds and loads.
What does an overdrive ratio commonly do?
A Raises engine speed at cruise
B Locks the steering shaft
C Stops the differential
D Reduces engine speed at cruise
Answer: D. Reduces engine speed at cruise. An overdrive ratio lets the output turn faster than the transmission input.
Which device helps equalize gear speeds before engagement?
A Torque converter
B Transfer case
C Synchronizer
D Final drive
Answer: C. Synchronizer. A synchronizer matches gear and shaft speeds before engagement in a synchronized manual gearbox.
What couples engine power hydraulically in many automatics?
A Torque converter
B Dry clutch
C Universal joint
D CV joint
Answer: A. Torque converter. A torque converter transfers power through moving fluid between impeller and turbine.
Which transmission changes ratio continuously without fixed steps?
A Manual gearbox
B Fixed axle
C CVT
D Transfer case
Answer: C. CVT. A continuously variable transmission changes ratio over a continuous range.
What distinguishes a dual-clutch transmission?
A Two transfer cases
B Two final drives
C Two radiators
D Two alternating clutches
Answer: D. Two alternating clutches. A DCT uses separate clutches for alternate gear paths.
Which gearset contains sun, planet, and ring gears?
A Worm gearset
B Planetary gearset
C Bevel axle only
D Rack and pinion
Answer: B. Planetary gearset. A planetary set uses sun, planet gears, carrier, and ring gear.
Which stage reduces speed before the driven wheels?
A Oil filter
B Final drive
C Radiator fan
D Fuel pump
Answer: B. Final drive. The final drive provides a fixed reduction between transmission and wheels.
What does transmission fluid help provide?
A Lubrication and cooling
B Fuel ignition
C Tire inflation
D Exhaust filtration
Answer: A. Lubrication and cooling. Transmission fluid lubricates components and may carry heat or operate hydraulic controls.
What connects a rear transmission output to the axle?
A Tie rod
B Driveshaft
C Radiator hose
D Fuel line
Answer: B. Driveshaft. A driveshaft transmits rotation from transmission toward the rear final drive.
What does a transaxle combine?
A Engine and radiator
B Clutch and fuel tank
C Steering and brakes
D Transmission and axle functions
Answer: D. Transmission and axle functions. A transaxle packages transmission and final-drive or differential functions together.
Which unit can distribute drive between front and rear axles?
A Transfer case
B Oil pump
C Synchromesh hub
D Torque converter stator
Answer: A. Transfer case. A transfer case distributes drive to multiple axles in a four-wheel-drive layout.
What does four-wheel drive describe?
A Drive can reach both axles
B All wheels always steer
C Four gearboxes are fitted
D Four engines operate together
Answer: A. Drive can reach both axles. Four-wheel drive can supply torque to front and rear axles.
What does a gear ratio compare?
A Fuel and air mass
B Input and output rotation
C Coolant and oil volume
D Tire and wheel width
Answer: B. Input and output rotation. A gear ratio relates the rotational speeds of connected members.
Why might a driver downshift before climbing?
A Reduce wheel torque
B Disconnect the final drive
C Increase wheel torque
D Open the radiator cap
Answer: C. Increase wheel torque. A lower gear increases available wheel torque for a given engine torque.
What does an upshift generally do at the same road speed?
A Raises engine rpm
B Reverses wheel rotation
C Locks the differential
D Lowers engine rpm
Answer: D. Lowers engine rpm. A higher gear ratio usually reduces engine speed at a given vehicle speed.
Which shaft receives torque from the engine-side clutch?
A Input shaft
B Output shaft
C Axle shaft
D Steering shaft
Answer: A. Input shaft. The input shaft receives power from the engine or clutch assembly.
Where are gears enclosed and supported?
A Fuel tank
B Radiator core
C Gearbox casing
D Air cleaner
Answer: C. Gearbox casing. The gearbox casing supports shafts and contains the gear train and lubricant.
What transfers motion between meshing gears?
A Coolant pressure
B Fuel vapor
C Tooth contact
D Brake vacuum
Answer: C. Tooth contact. Gear teeth transmit motion and torque through direct contact.
Which manual gearbox feature helps prevent gear clash?
A Oil cooler
B Synchronizer
C Fan clutch
D Fuel regulator
Answer: B. Synchronizer. Synchronization reduces speed difference before the dog teeth engage.
What changes when an automatic transmission shifts ratio?
A Wheelbase length
B Engine bore size
C Fuel tank capacity
D Selected gear path
Answer: D. Selected gear path. Automatic controls select different internal gear paths to vary the ratio.