If current doubles in an unchanged line resistance, how does I²R loss change?
A It becomes four times
B It halves
C It doubles
D It stays equal
Answer: A. It becomes four times. Resistive loss is proportional to current squared.
At fixed power, doubling transmission voltage ideally changes line current how?
A It doubles
B It quadruples
C It halves
D It stays fixed
Answer: C. It halves. For fixed power and power factor, current is inversely proportional to voltage.
If line current is cut in half, what fraction of its former resistive loss remains?
A One half
B Three quarters
C One quarter
D The same
Answer: C. One quarter. (0.5I)²R equals 0.25I²R.
Balanced three-phase real power in line values is given by which expression?
A VLIL only
B 3VL/IL
C VL/√3IL
D √3VLILcosφ
Answer: D. √3VLILcosφ. Three-phase power is √3 times line voltage, line current and power factor.
A 100 MW load at 220 kV and unity power factor draws about what line current?
A 131 A
B 455 A
C 262 A
D 1000 A
Answer: C. 262 A. I=P/(√3V)=100 MW/(√3×220 kV), about 262 A.
At the same real power and voltage, a 0.8 power factor requires current compared with unity power factor that is what?
A 0.8 times
B 1.25 times
C Equal
D 0.64 times
Answer: B. 1.25 times. Current is inversely proportional to power factor for fixed real power.
Conductor resistance is proportional to length and resistivity, divided by what?
A Area
B Frequency
C Voltage
D Power factor
Answer: A. Area. R=ρℓ/A for a uniform conductor.
If conductor area doubles while length and material stay fixed, resistance becomes what?
A Double
B Half
C Four times
D Unchanged
Answer: B. Half. Resistance varies inversely with cross-sectional area.
A balanced star system at 400 kV line-to-line has phase voltage about what?
A 400 kV
B 693 kV
C 133 kV
D 231 kV
Answer: D. 231 kV. Vphase=400/√3≈231 kV.
A shunt capacitor bank on a loaded transmission bus commonly helps do what?
A Support voltage
B Absorb all active power
C Raise line resistance
D Stop charging current
Answer: A. Support voltage. Capacitive VAR support helps offset inductive demand and support voltage.
A shunt reactor on a lightly loaded long AC line is often used to absorb what?
A Active load energy
B Capacitive VARs
C Generator torque
D Conductor resistance
Answer: B. Capacitive VARs. A reactor counteracts line charging and helps control overvoltage.
Line charging current is caused mainly by which property?
A Series resistance
B Tower height only
C Conductor mass
D Shunt capacitance
Answer: D. Shunt capacitance. Alternating voltage drives current through line-to-line and line-to-ground capacitance.
A lightly loaded long AC line can show receiving voltage above sending voltage. What is this called?
A Skin effect
B Ferranti effect
C Corona effect
D Proximity effect
Answer: B. Ferranti effect. Line capacitance can raise receiving-end voltage when load is small.
Besides energy loss, corona can create which nuisance?
A Radio interference
B Lower tower weight
C Higher fuel value
D DC offset only
Answer: A. Radio interference. Corona discharges can cause audible noise and electromagnetic interference.
Why are bundled conductors used on many high-voltage lines?
A Increase corona
B Reduce surface stress
C Raise resistance
D Remove phase spacing
Answer: B. Reduce surface stress. A bundle increases effective conductor diameter and reduces electric-field stress.
A lightning arrester protects equipment by doing what during a surge?
A Limiting overvoltage
B Increasing line current
C Changing system frequency
D Opening neutral permanently
Answer: A. Limiting overvoltage. It diverts surge current and clamps voltage to a safer level.
Optical ground wire can combine shielding with what extra function?
A Power generation
B Reactive compensation
C Voltage transformation
D Fiber communication
Answer: D. Fiber communication. OPGW incorporates optical fibers for communication and monitoring.
Compared with overhead lines, AC cables generally have what capacitance per unit length?
A Lower
B Exactly zero
C Higher
D Same in every case
Answer: C. Higher. Conductors are closer and separated by dielectric insulation.
Skin effect causes AC conductor resistance compared with DC resistance to be generally what?
A Lower
B Zero
C Higher
D Unaffected at all frequencies
Answer: C. Higher. Current crowding reduces effective conducting area for AC.
Current redistribution caused by nearby conductors is called what?
A Corona effect
B Ferranti effect
C Hunting
D Proximity effect
Answer: D. Proximity effect. Neighboring magnetic fields change current density in each conductor.
A grounded shield wire above phases reduces direct exposure to what?
A Load changes
B Lightning strikes
C Charging current
D Skin effect
Answer: B. Lightning strikes. It intercepts many strokes and conducts them toward tower grounds.
A series capacitor in a transmission line mainly reduces what?
A Shunt capacitance
B Conductor length
C System frequency
D Net series reactance
Answer: D. Net series reactance. Series compensation offsets part of inductive line reactance.
Shunt compensation is connected electrically how to the line bus?
A In parallel
B In series only
C Across an open switch
D Inside the conductor
Answer: A. In parallel. Shunt devices connect between the bus and ground or neutral.
Transposition helps equalize average inductance and what among phases?
A Fuel cost
B Tower footing
C Capacitance
D Conductor temperature
Answer: C. Capacitance. Moving each phase through each position balances average line parameters.
What does line efficiency compare?
A Receiving output to sending input
B Voltage to frequency
C Resistance to reactance
D Current to pole count
Answer: A. Receiving output to sending input. Efficiency is useful power delivered divided by power supplied.