What is the main purpose of a transmission network?
A Move bulk power
B Store household energy
C Generate fuel
D Measure retail bills
Answer: A. Move bulk power. Transmission carries large quantities of electricity from generating areas to substations.
Why are power transformers used to raise voltage at generating stations?
A Raise conductor resistance
B Change grid frequency
C Lower line current
D Eliminate all losses
Answer: C. Lower line current. For fixed power, higher voltage means lower current and smaller IΒ²R loss.
Which supply system is commonly used for bulk AC transmission?
A Single-phase DC
B Three-phase AC
C Two-phase DC
D Pulsed DC
Answer: B. Three-phase AC. Three-phase systems transmit power efficiently with balanced conductors.
High-voltage transmission helps reduce which conductor loss?
A IΒ²R loss
B Core hysteresis
C Brush friction
D Battery leakage
Answer: A. IΒ²R loss. Lower current reduces resistive heating in line conductors.
A transmission-line conductor made from aluminum is often chosen for its low mass and what?
A High density
B Poor corrosion resistance
C High magnetic loss
D Good conductivity
Answer: D. Good conductivity. Aluminum is conductive and lighter than copper for comparable conductor size.
ACSR conductors combine aluminum strands with a steel core. What does the core provide?
A Mechanical strength
B Electrical insulation
C Reactive power
D Cooling water
Answer: A. Mechanical strength. Steel carries much of the tensile load over long spans.
How does conductor resistance change when its length increases?
A It decreases
B It increases
C It becomes zero
D It stays fixed
Answer: B. It increases. Resistance is proportional to conductor length.
For the same conductor material and length, a larger cross-sectional area causes resistance to do what?
A Increase
B Double frequency
C Decrease
D Become inductive
Answer: C. Decrease. Resistance is inversely proportional to cross-sectional area.
Which substation transformer raises generator voltage for transmission?
A Current transformer
B Step-up transformer
C Distribution transformer
D Isolation reactor
Answer: B. Step-up transformer. A step-up transformer increases voltage before long-distance transfer.
At the receiving grid substation, transmission voltage is usually changed by what?
A Series capacitor
B Lightning arrester
C Ground wire
D Step-down transformer
Answer: D. Step-down transformer. Transformers lower voltage for subtransmission and distribution.
An overhead-line insulator primarily separates a live conductor from what?
A Other live phases always
B The generator rotor
C Tower structure
D The transformer core
Answer: C. Tower structure. Insulation prevents current from flowing into grounded supports.
What does a transmission tower mainly support?
A Generator windings
B Fuel pipes
C Conductors and insulators
D Substation batteries
Answer: C. Conductors and insulators. Towers maintain safe clearances and carry mechanical loads.
A shield wire above phase conductors is intended mainly to intercept what?
A Load current
B Lightning strokes
C Reactive power
D Corona current only
Answer: B. Lightning strokes. Ground wires help protect phase conductors from direct lightning attachment.
Corona around a high-voltage conductor begins when what happens?
A Air ionizes nearby
B Copper melts
C The line frequency stops
D The tower rotates
Answer: A. Air ionizes nearby. A sufficiently strong electric field ionizes air near the conductor surface.
Which conductor design change can reduce corona at a given voltage?
A Use sharper edges
B Reduce spacing greatly
C Remove shield wires
D Increase effective diameter
Answer: D. Increase effective diameter. Larger or bundled conductors lower surface electric-field intensity.
What is conductor sag?
A Current in each phase
B Vertical drop between supports
C Voltage across insulator
D Tower foundation depth
Answer: B. Vertical drop between supports. Sag is the downward curve of a suspended conductor span.
As conductor temperature rises, sag generally does what?
A Decreases
B Becomes zero
C Increases
D Changes line frequency
Answer: C. Increases. Thermal expansion lengthens the conductor and increases sag.
Why are overhead-line phases periodically transposed?
A Balance line parameters
B Increase conductor heating
C Create DC output
D Remove all capacitance
Answer: A. Balance line parameters. Transposition makes average inductance and capacitance more nearly balanced among phases.
AC current crowding toward a conductor surface is called what?
A Skin effect
B Corona effect
C Ferranti effect
D Proximity relay
Answer: A. Skin effect. Alternating magnetic fields make current density nonuniform across the conductor.
Which field is associated with line capacitance?
A Gravitational field
B Thermal field
C Nuclear field
D Electric field
Answer: D. Electric field. Capacitance stores energy in the electric field between conductors and ground.
Line inductance is associated with energy stored in which field?
A Electric field only
B Sound field
C Thermal field
D Magnetic field
Answer: D. Magnetic field. Current creates magnetic flux around the conductor.
A double-circuit transmission tower carries how many three-phase circuits?
A One phase
B One conductor
C Three circuits always
D Two circuits
Answer: D. Two circuits. Each circuit has its own three phase conductors on the structure.
Compared with overhead lines, underground transmission cables usually need more insulation because they have what?
A Lower capacitance
B No electric field
C Closer conductor spacing
D No metallic sheath
Answer: C. Closer conductor spacing. Compact spacing raises electric stress and requires solid insulation.
What corridor is kept clear beneath and around transmission lines?
A Load curve
B Right of way
C Power angle
D SIL zone
Answer: B. Right of way. A right-of-way corridor supports access and safe electrical clearances.
Insulator strings suspend conductors while providing what function?
A Electrical isolation
B Voltage generation
C Current measurement
D Frequency conversion
Answer: A. Electrical isolation. Suspension strings mechanically support conductors and isolate them from grounded towers.