A centered 24 kN load sits on a 6 m simple span. Each reaction?
A 6 kN
B 18 kN
C 12 kN
D 24 kN
Answer: C. 12 kN. By symmetry, each support carries half the centered load: 24/2 = 12 kN.
A 4 kN/m UDL spans 5 m simply supported. Each reaction?
A 10 kN
B 5 kN
C 12 kN
D 20 kN
Answer: A. 10 kN. Total load is 20 kN; symmetry gives 10 kN at each support.
A 10 kN end load acts 3 m from a cantilever fixed end. Fixed moment?
A 30 kN·m
B 10 kN·m
C 20 kN·m
D 40 kN·m
Answer: A. 30 kN·m. The fixed-end moment magnitude is PL = 10×3 = 30 kN·m.
A 2 kN/m UDL spans a 4 m cantilever. Fixed-end moment?
A 4 kN·m
B 16 kN·m
C 8 kN·m
D 32 kN·m
Answer: B. 16 kN·m. For a full-span cantilever UDL, M = wL²/2 = 2×16/2 = 16 kN·m.
A 20 kN load is 2 m from A on a 5 m simple span. Reaction at A?
A 8 kN
B 12 kN
C 10 kN
D 20 kN
Answer: B. 12 kN. Taking moments about B, RA = P(L−x)/L = 20×3/5 = 12 kN.
A plane truss has m=5, r=3, j=4. Static count?
A One redundant
B Two mechanisms
C Determinate count
D Two redundants
Answer: C. Determinate count. m+r−2j = 5+3−8 = 0, the determinacy count for a stable simple truss.
A plane truss has m=7, r=3, j=4. Static redundancy count?
A 0
B 1
C 4
D 2
Answer: D. 2. m+r−2j = 7+3−8 = 2 redundants, assuming stability.
EI=60 kN·m², L=3 m, far end fixed. Rotational stiffness?
A 20 kN·m/rad
B 80 kN·m/rad
C 40 kN·m/rad
D 60 kN·m/rad
Answer: B. 80 kN·m/rad. Near-end stiffness is 4EI/L = 4×60/3 = 80 kN·m/rad.
EI=60 kN·m², L=3 m, far end pinned. Rotational stiffness?
A 20 kN·m/rad
B 60 kN·m/rad
C 40 kN·m/rad
D 80 kN·m/rad
Answer: B. 60 kN·m/rad. With the far end hinged, stiffness is 3EI/L = 3×60/3 = 60 kN·m/rad.
A 40 kN·m end moment acts at a fixed far-end member. Carry-over moment?
A 20 kN·m
B 10 kN·m
C 30 kN·m
D 40 kN·m
Answer: A. 20 kN·m. The carry-over factor is one-half, so the far-end moment is 20 kN·m.
A member stiffness is 6; total joint stiffness is 12. Distribution factor?
A 0.50
B 0.25
C 0.60
D 2.00
Answer: A. 0.50. Distribution factor = member stiffness/total stiffness = 6/12 = 0.50.
A unit load is 4 m from A on a 10 m simple span. IL ordinate for RA?
A 0.20
B 0.40
C 0.80
D 0.60
Answer: D. 0.60. For a unit load at x, RA = (L−x)/L = (10−4)/10 = 0.60.
For the same load position, IL ordinate for RB?
A 0.20
B 0.60
C 0.80
D 0.40
Answer: D. 0.40. For a unit load at x, RB = x/L = 4/10 = 0.40.
A 3 kN/m UDL spans a 6 m simple beam. Maximum moment?
A 13.5 kN·m
B 9 kN·m
C 18 kN·m
D 27 kN·m
Answer: A. 13.5 kN·m. Mmax = wL²/8 = 3×36/8 = 13.5 kN·m.
A 20 kN center load acts on a 6 m simple beam. Maximum moment?
A 15 kN·m
B 20 kN·m
C 30 kN·m
D 60 kN·m
Answer: C. 30 kN·m. For a centered load, Mmax = PL/4 = 20×6/4 = 30 kN·m.
At the crown hinge of a three-hinged arch, bending moment is…
A Maximum
B Zero
C Equal to thrust
D Unbounded
Answer: B. Zero. A perfect hinge cannot transmit bending moment.
N=20 kN, L=2 m, A=1000 mm², E=200 GPa. Axial elongation?
A 0.02 mm
B 0.1 mm
C 2 mm
D 0.2 mm
Answer: D. 0.2 mm. δ = NL/AE = 20,000×2000/(1000×200,000) = 0.2 mm.
M/EI is 0.01 per metre over 2 m. Slope change?
A 0.005 rad
B 0.01 rad
C 0.2 rad
D 0.02 rad
Answer: D. 0.02 rad. The slope change equals the area under M/EI: 0.01×2 = 0.02 rad.
A 5 kN/m UDL covers 4 m. Total load?
A 5 kN
B 9 kN
C 20 kN
D 25 kN
Answer: C. 20 kN. Total distributed load is wL = 5×4 = 20 kN.
A 3 kN/m UDL acts over 2 m. Shear change magnitude?
A 1.5 kN
B 3 kN
C 6 kN
D 12 kN
Answer: C. 6 kN. The shear change equals the load area wL = 3×2 = 6 kN.
A constant 12 kN shear acts over 3 m. Moment change?
A 4 kN·m
B 15 kN·m
C 48 kN·m
D 36 kN·m
Answer: D. 36 kN·m. Moment change is the shear-diagram area: 12×3 = 36 kN·m.
A 3 kN/m UDL covers a 4 m cantilever. Fixed shear reaction?
A 12 kN
B 3 kN
C 7 kN
D 24 kN
Answer: A. 12 kN. Total load is wL = 3×4 = 12 kN, balanced by the fixed-end reaction.
A 10 kN point load is 1 m from A on a 4 m span. Reaction at B?
A 2.5 kN
B 1.5 kN
C 5 kN
D 7.5 kN
Answer: A. 2.5 kN. Taking moments about A, RB×4 = 10×1, so RB = 2.5 kN.
For m=7, r=3, j=5, plane-truss count is…
A 1
B 0
C 2
D 3
Answer: B. 0. m+r−2j = 7+3−10 = 0, indicating a determinate count if stable.
A symmetric 20 kN center load on a 4 m span gives RA…
A 5 kN
B 15 kN
C 10 kN
D 20 kN
Answer: C. 10 kN. Symmetric reactions are equal: RA = 20/2 = 10 kN.