For a plane truss, the count m+r−2j equal zero indicates…
A A mechanism always
B One redundant always
C A fixed arch
D A determinate count
Answer: D. A determinate count. For a simple stable plane truss, m+r = 2j is the static determinacy count.
A truss with m=6, r=3, j=4 has count…
A Determinate count
B One redundant
C Two mechanisms
D Three redundants
Answer: B. One redundant. m+r−2j = 6+3−8 = 1, indicating one degree of static indeterminacy if stable.
A simply supported beam under full-span UDL has reactions…
A Equal for symmetric loading
B Zero at both supports
C Only at left support
D Unequal always
Answer: A. Equal for symmetric loading. Symmetry gives equal vertical reactions of wL/2 at each support.
A simply supported beam with a centered point load has…
A All load at one support
B Zero bending moment
C Equal support reactions
D A fixed-end couple
Answer: C. Equal support reactions. The centered load and symmetric supports produce equal reactions P/2.
Virtual work computes displacement using…
A Only material hardness
B Only support reactions
C Equilibrated virtual forces
D Temperature gradients only
Answer: C. Equilibrated virtual forces. The unit-load virtual-work method combines real-force and virtual-force member actions.
The force method treats redundants as…
A Unknown forces
B Unknown displacements only
C Known support reactions
D Material parameters
Answer: A. Unknown forces. The force method selects redundant forces and enforces compatibility of the released structure.
The stiffness method primarily solves for…
A Member colors
B Only support rotations
C Joint displacements
D Load positions only
Answer: C. Joint displacements. The displacement or stiffness method uses nodal displacements as primary unknowns.
The matrix equilibrium form is commonly…
A [F]{K} = {d}
B {K} = [d]{F}
C [d]{F} = [K]
D [K]{d} = {F}
Answer: D. [K]{d} = {F}. Global stiffness matrix times displacement vector equals the applied load vector.
A prismatic member fixed at far end has rotational stiffness…
A 2EI/L
B 3EI/L
C 4EI/L
D EI/L
Answer: C. 4EI/L. The near-end rotational stiffness is 4EI/L when the far end is fixed.
A prismatic member pinned at far end has rotational stiffness…
A 4EI/L
B 3EI/L
C 2EI/L
D EI/L
Answer: B. 3EI/L. The near-end rotational stiffness is 3EI/L when the far end is hinged.
For a prismatic member with far end fixed, carry-over factor is…
A One-half
B Zero
C One-quarter
D One
Answer: A. One-half. Half of the near-end moment is carried to the fixed far end.
At a joint, a moment-distribution factor is member stiffness divided by…
A Total joint stiffness
B Applied joint moment
C Column axial force
D Beam span squared
Answer: A. Total joint stiffness. Distribution factors share an unbalanced joint moment in proportion to connected member stiffness.
The slope-deflection method relates member end moments to…
A End rotations and translation
B Only applied loads
C Only cross-sectional area
D Material color
Answer: A. End rotations and translation. Slope-deflection equations relate end moments to rotations, chord translation and loads.
A continuous beam is statically indeterminate because…
A It has no supports
B Redundant support actions exist
C It carries no moment
D It is always unstable
Answer: B. Redundant support actions exist. Continuity introduces redundant reactions beyond what equilibrium alone can determine.
A primary structure in the force method is made determinate by…
A Adding more supports
B Removing all loads
C Increasing stiffness
D Releasing redundants
Answer: D. Releasing redundants. The selected redundant restraints are released to form a determinate primary structure.
The moment-area method uses areas of…
A M/EI diagrams
B Shear diagrams only
C Axial force diagrams
D Load diagrams only
Answer: A. M/EI diagrams. Changes in slope and deflection relate to area and first moment of the M/EI diagram.
In the conjugate beam method, M/EI acts as…
A Shear in real beam
B Axial force in truss
C Loading on conjugate beam
D Support reaction only
Answer: C. Loading on conjugate beam. The real beam’s M/EI diagram is applied as loading to the conjugate beam.
Maxwell’s reciprocal theorem relates…
A Reciprocal displacements
B Support reactions and density
C Stress and temperature only
D Moment and shear units
Answer: A. Reciprocal displacements. For linear elastic structures, displacement at A from load at B equals the reciprocal case.
The Muller-Breslau principle constructs an influence line by…
A Doubling all loads
B Removing material stiffness
C Fixing every joint
D Releasing response restraint
Answer: D. Releasing response restraint. Release the restraint corresponding to the response and impose a unit displacement or rotation.
A moving-load influence line helps locate…
A Material yield strain
B Construction joint spacing
C Thermal expansion coefficient
D Critical load position
Answer: D. Critical load position. Influence lines identify where moving loads produce maximum response at a chosen section.
For a symmetric frame and symmetric loading, lateral sidesway is…
A Always maximum
B Absent by symmetry
C Unrelated to geometry
D Equal to beam depth
Answer: B. Absent by symmetry. Symmetry of geometry, supports and loading prevents sidesway in the ideal linear model.
A three-hinged arch is statically determinate because…
A It has no reactions
B Crown hinge adds an equation
C It has no axial force
D Its span is short
Answer: B. Crown hinge adds an equation. The hinge moment condition at the crown supplements planar equilibrium equations.
A pin-jointed truss is stable when its members form…
A One straight chain
B Any closed polygon only
C A single triangle always
D A nonmechanism geometry
Answer: D. A nonmechanism geometry. Member count alone is insufficient; geometry must prevent a mechanism.
The degree of kinematic indeterminacy counts…
A Redundant forces only
B Independent displacement unknowns
C Load cases only
D Material constants
Answer: B. Independent displacement unknowns. Kinematic indeterminacy is the number of independent joint displacement components.
The degree of static indeterminacy counts…
A All displacement unknowns
B Load positions
C Redundant force unknowns
D Material properties
Answer: C. Redundant force unknowns. Static indeterminacy counts force unknowns beyond available independent equilibrium equations.