Answer: A. Reactions and internal response. Analysis evaluates support reactions, member forces, stresses and deformations under applied loads.
A free-body diagram shows…
A External forces on a body
B Only material colors
C Internal crystal grains
D Construction sequence
Answer: A. External forces on a body. A free-body diagram isolates a structure and shows its external loads and reactions.
Static equilibrium in two dimensions requires…
A Only zero displacement
B Only zero rotation
C ΣFx, ΣFy, ΣM equal zero
D Equal material moduli
Answer: C. ΣFx, ΣFy, ΣM equal zero. Planar equilibrium requires zero resultant force in both directions and zero resultant moment.
A statically determinate structure can be solved using…
A Compatibility alone
B Equilibrium alone
C Material testing only
D Energy methods only
Answer: B. Equilibrium alone. For a determinate structure, equilibrium equations suffice to find reactions and internal forces.
A statically indeterminate structure needs…
A Equilibrium alone
B Geometry alone
C Material density only
D Equilibrium and compatibility
Answer: D. Equilibrium and compatibility. Indeterminate structures require equilibrium plus deformation compatibility and force-displacement relations.
A stable structure resists…
A Rigid-body motion and collapse
B All elastic deformation
C Every temperature change
D All internal force
Answer: A. Rigid-body motion and collapse. Stability means the structure can maintain equilibrium without a mechanism or rigid-body motion.
A pin support in a plane provides…
A One moment reaction
B Three moment reactions
C Two force reactions
D No reactions
Answer: C. Two force reactions. An ideal planar pin restrains horizontal and vertical translation but permits rotation.
A roller support ideally provides…
A Two force reactions
B A moment only
C Three reactions
D One reaction
Answer: D. One reaction. A frictionless roller supplies one reaction normal to the supporting surface.
A fixed support in a plane provides…
A One vertical reaction
B One moment only
C Two forces and moment
D No rotation restraint
Answer: C. Two forces and moment. A planar fixed support restrains two translations and rotation.
A cantilever is fixed at…
A Both ends
B One end
C No ends
D Its center only
Answer: B. One end. A cantilever is fixed at one end and free at the other.
A plane truss member ideally carries…
A Bending only
B Torsion only
C Axial force only
D Uniform pressure
Answer: C. Axial force only. Ideal truss members are two-force elements carrying tension or compression.
The method of joints applies…
A Equilibrium at each joint
B Compatibility at each span
C Moment distribution at joints
D Energy balance only
Answer: A. Equilibrium at each joint. Each truss joint is treated as a concurrent-force system in equilibrium.
The method of sections is useful to find…
A All deflections directly
B Selected member forces
C Concrete strength
D Support settlements only
Answer: B. Selected member forces. A cut through a truss lets equilibrium solve selected member forces efficiently.
A zero-force member may occur at an unloaded joint with…
A Three loaded members
B Two collinear members
C One fixed support
D Two noncollinear members
Answer: D. Two noncollinear members. At an unloaded joint with two noncollinear members, both must be zero-force members.
A truss member in tension tends to…
A Push into joint
B Pull away from joint
C Twist the joint
D Apply a couple only
Answer: B. Pull away from joint. A tensile member pulls on the joints at its ends.
A frame differs from an ideal truss because frame members can carry…
A Axial force only
B No internal force
C Only torsion
D Bending and shear
Answer: D. Bending and shear. Frame members can carry axial force, shear force and bending moment.
A cable under transverse loading primarily carries…
A Tension
B Compression
C Bending moment
D Shear only
Answer: A. Tension. A flexible cable carries tensile force and changes shape to its loading.
A shear-force diagram plots…
A Deflection along span
B Internal shear along span
C Axial strain along span
D Support settlement only
Answer: B. Internal shear along span. The shear diagram shows the internal shear force at sections along a member.
A bending-moment diagram plots…
A Only applied loads
B Material stress curve
C Joint displacement only
D Internal moment along span
Answer: D. Internal moment along span. The bending-moment diagram shows internal bending moment along the member.
A concentrated point load causes shear force to…
A Vary parabolically
B Remain unchanged always
C Become bending stress
D Jump by the load
Answer: D. Jump by the load. A point load produces a discontinuity in the shear-force diagram equal to its magnitude.
A constant distributed load makes shear vary…
A As a constant
B As a step only
C Linearly along span
D Exponentially
Answer: C. Linearly along span. The derivative of shear with respect to span is the negative distributed load.
The change in bending moment equals…
A Area under shear diagram
B Area under deflection curve
C Slope of load diagram
D Support reaction times area
Answer: A. Area under shear diagram. Moment change over a segment equals the signed area under its shear diagram.
An influence line shows response due to…
A Fixed temperature rise
B Changing material density
C Moving unit load
D Moving support only
Answer: C. Moving unit load. An influence line plots a response at one location as a unit load moves along the structure.
A determinate three-hinged arch has a hinge at…
A Its crown only
B Its crown and supports
C One support only
D No locations
Answer: B. Its crown and supports. A three-hinged arch has hinges at both supports and at the crown.
A structural model idealizes…
A Loads, supports and members
B Only building appearance
C Only construction cost
D Only material color
Answer: A. Loads, supports and members. Analysis models simplify geometry, connections, supports, loads and material behavior.