Stability and Control MCQs (Set-3)

Difficulty: Medium

The neutral point is at 0.45 MAC and CG at 0.33 MAC. What is static margin?

A 8% MAC
B 18% MAC
C 22% MAC
D 12% MAC

With CG ahead of the neutral point, what longitudinal tendency is expected?

A Negative static stability
B Positive static stability
C Neutral yaw stability
D No pitch control

For the usual pitching-moment convention, what sign of CmΞ± indicates longitudinal static stability?

A Negative
B Positive
C Zero only
D Undefined

After a pitch disturbance, oscillations shrink over time. What does that indicate?

A Neutral static stability
B Negative damping
C Positive dynamic stability
D Control reversal

Which motion characterizes the short-period longitudinal mode?

A Slow speed-height exchange
B Rapid pitch oscillation
C Slow spiral turn
D Pure yaw divergence

What mainly changes during a phugoid oscillation?

A Roll and yaw
B Fuel and pressure
C Pitch trim only
D Speed and altitude

Which coupled motion defines Dutch roll?

A Pitch and heave
B Roll subsidence only
C Yaw and roll oscillation
D Spiral divergence

Which system can damp Dutch-roll motion?

A Yaw damper
B Elevator trim
C Flap drive
D Fuel controller

During spiral instability, what gradually increases?

A Cabin pressure
B Pitch trim
C Fuel flow
D Bank angle

What describes the roll-subsidence mode?

A Pitch speed rises
B Roll rate decays
C Yaw remains fixed
D Altitude oscillates

A lower tail volume coefficient generally means what?

A More wing area
B Higher air density
C Less tail leverage
D Lower CG

An aft CG shift moves the aircraft closer to what stability reference?

A Neutral point
B Wing root
C Thrust line
D Rudder hinge

Why can control forces rise as airspeed increases?

A CG moves forward
B Static margin vanishes
C Tail area shrinks
D Dynamic pressure increases

What does stick-free stability account for?

A Fixed control hinges
B Locked landing gear
C Floating control surfaces
D Automatic trim only

Directional stability is often compared with what behavior?

A Pendulum swing
B Weathercock alignment
C Gyroscopic precession
D Wing dihedral

A sideslip with positive dihedral effect tends to create what?

A Restoring roll
B Nose-down pitch
C Higher cabin altitude
D Brake drag

Why can a down-going aileron create adverse yaw?

A Lower fuselage pressure
B Reduced tail area
C Fuel imbalance
D Extra profile and induced drag

What is a common benefit of differential ailerons?

A More pitch stability
B Lower stall speed
C Less adverse yaw
D Higher tail volume

What does coordinated rudder input help control during a turn?

A Static margin
B Sideslip
C Elevator trim
D Brake temperature

Horizontal tail volume coefficient uses which quantities?

A Tail area and arm
B Wing sweep and span
C CG and weight
D Thrust and speed

Why does a control surface lose effectiveness at very low speed?

A Neutral point moves
B CG becomes fixed
C Control hinge disappears
D Dynamic pressure falls

A trimmed aircraft in steady flight has what pitching-moment condition?

A Lift is zero
B Drag is zero
C Net moment is zero
D CG equals tail

Which statement distinguishes stability from controllability?

A Both mean lift
B Stability restores; control commands
C Control restores automatically
D Stability is engine power

How does a horizontal tail create a restoring pitch moment?

A Changes tail force
B Changes wing span
C Moves the CG
D Changes rudder area

What can an above-CG thrust line create when thrust increases?

A Static margin
B Wing dihedral
C Pitching moment
D Rudder effectiveness