For saturated soil, Terzaghi effective stress is which relation?
A Pore pressure minus total
B Total stress plus pore pressure
C Shear stress minus water head
D Total stress minus pore pressure
Answer: D. Total stress minus pore pressure. Effective stress is the stress carried by the soil skeleton: sigma-prime = sigma – u.
On a Mohr circle, the radius represents what stress quantity?
A Mean pore pressure
B Bulk unit weight
C Hydraulic gradient
D Maximum in-plane shear
Answer: D. Maximum in-plane shear. The circle radius equals the maximum in-plane shear stress for the represented stress state.
In Mohr-Coulomb strength, frictional resistance grows with what?
A Water content alone
B Void volume
C Effective normal stress
D Total unit weight alone
Answer: C. Effective normal stress. The frictional component is sigma-prime times tan phi-prime.
A UU triaxial test allows which condition?
A No drainage during loading
B Drainage during consolidation
C Drainage during shear
D Full volume change
Answer: A. No drainage during loading. UU means unconsolidated-undrained: neither consolidation nor drainage during shearing is permitted.
In a CU triaxial test, consolidation occurs before which stage?
A Undrained shearing
B Drained shearing
C Drying the specimen
D Compaction by hammer
Answer: A. Undrained shearing. CU specimens consolidate under cell pressure, then are sheared without drainage.
Drained strength parameters are commonly written as what?
A c-prime and phi-prime
B cu and water content
C Gs and e
D k and i
Answer: A. c-prime and phi-prime. Effective-stress strength is expressed using effective cohesion c-prime and friction angle phi-prime.
The compression index is the slope of which plot during virgin compression?
A Water content versus depth
B Stress versus time
C Void ratio versus log stress
D Porosity versus gradient
Answer: C. Void ratio versus log stress. Cc is the magnitude of the virgin compression slope on an e–log sigma-prime plot.
The coefficient of consolidation relates permeability to what soil property?
A Grain angularity
B Specific gravity
C Plastic limit
D Volume compressibility
Answer: D. Volume compressibility. cv equals k divided by mv gamma-w, combining permeability and compressibility.
Terzaghi’s time factor uses drainage path squared in which denominator?
A Hdr squared
B Layer thickness only
C Void ratio squared
D Hydraulic head squared
Answer: A. Hdr squared. Tv = cv t / Hdr², where Hdr is the maximum drainage path.
For double drainage, the maximum path in a layer of thickness H is what?
A H
B Two H
C H squared
D H divided by two
Answer: D. H divided by two. Water can drain upward and downward, so Hdr is half the layer thickness.
Primary consolidation is essentially complete when what has dissipated?
A All water in soil
B Excess pore pressure
C Effective stress
D Soil solids
Answer: B. Excess pore pressure. Primary consolidation ends when the excess pore-water pressure from loading has dissipated.
Secondary compression occurs mainly after which process?
A Initial saturation
B Soil classification
C Compaction only
D Primary consolidation
Answer: D. Primary consolidation. Secondary compression reflects time-dependent soil creep after primary excess pore pressure dissipation.
Darcy seepage velocity equals discharge divided by what area?
A Void area only
B Total cross-sectional area
C Solid area
D Wetted perimeter
Answer: B. Total cross-sectional area. Darcy velocity is Q/A based on total area; actual seepage velocity is larger by porosity adjustment.
A flow net with more flow channels tends to produce what?
A Lower head loss always
B Zero uplift pressure
C Higher soil cohesion
D Greater seepage discharge
Answer: D. Greater seepage discharge. For fixed k and head loss, discharge per unit width increases with the number of flow channels.
Critical hydraulic gradient for cohesionless soil depends on which properties?
A Gs and void ratio
B Liquid limit only
C Grain color
D Plasticity index only
Answer: A. Gs and void ratio. icr is approximately (Gs – 1)/(1 + e) for saturated soil under upward seepage.
For cohesionless soil, Rankine active coefficient is what?
A (1+sin(phi))/(1-sin(phi))
B (1-sin(phi))/(1+sin(phi))
C tan squared phi
D 1 + sin phi
Answer: B. (1-sin(phi))/(1+sin(phi)). Rankine’s active coefficient for a level backfill is Ka = (1 – sin phi)/(1 + sin phi).
For cohesionless soil, Rankine passive coefficient is what?
A Equal to zero
B Reciprocal of Ka
C Square root of Ka
D Half of Ka
Answer: B. Reciprocal of Ka. Under the same assumptions, Kp = (1 + sin phi)/(1 – sin phi) = 1/Ka.
Jaky’s estimate for normally consolidated K0 is which expression?
A 1 plus sin phi-prime
B sin squared phi-prime
C 1 minus sin phi-prime
D One divided by phi
Answer: C. 1 minus sin phi-prime. Jaky’s relation estimates at-rest pressure coefficient as K0 = 1 – sin phi-prime.
A retaining wall moves away from soil to mobilize what condition?
A Passive earth pressure
B Hydrostatic tension
C Active earth pressure
D Zero lateral pressure
Answer: C. Active earth pressure. Outward wall movement allows the soil to reach the active limit state.
A wall moves into soil to mobilize which condition?
A Active earth pressure
B Passive earth pressure
C At-rest pressure only
D Capillary pressure
Answer: B. Passive earth pressure. Inward movement compresses the soil and mobilizes passive resistance.
For a dry cohesionless infinite slope, factor of safety depends on what ratio?
A tan phi / tan beta
B tan beta / tan phi
C c over gamma only
D Gs divided by e
Answer: A. tan phi / tan beta. For a dry cohesionless infinite slope, FS = tan phi / tan beta.
Slope factor of safety compares resisting force with what?
A Pore volume
B Driving force
C Water content
D At-rest stress
Answer: B. Driving force. Factor of safety is the available resisting action divided by the driving action.
Triaxial deviator stress is the difference between which stresses?
A Sigma one and sigma three
B Sigma one and pore pressure
C Total and effective stress
D Sigma two and water head
Answer: A. Sigma one and sigma three. The deviator stress q is sigma-one minus sigma-three.
Mohr-Coulomb failure shear stress uses cohesion and what term?
A Void ratio times water content
B Hydraulic gradient times k
C Normal stress times tan phi
D Unit weight times depth squared
Answer: C. Normal stress times tan phi. The criterion is tau-f = c-prime + sigma-prime-n tan phi-prime.
An overconsolidated soil has OCR greater than what value?
A Zero only
B One-half
C One
D Exactly zero
Answer: C. One. OCR is past maximum effective stress divided by current effective stress; overconsolidated soil has OCR above one.