What process chiefly forms natural soil?
A Cement hydration
B Metal casting
C Bitumen oxidation
D Rock weathering
Answer: D. Rock weathering. Physical and chemical weathering break parent rock into soil particles.
Soil void ratio is defined as which ratio?
A Water volume / voids
B Solids / total volume
C Void volume / total
D Void volume / solids
Answer: D. Void volume / solids. Void ratio e compares void volume with the volume of soil solids.
Which expression defines soil porosity?
A Solids / void volume
B Water / solids
C Air / total
D Void volume / total
Answer: D. Void volume / total. Porosity n is void volume divided by total soil volume.
Water content is mass of water divided by what?
A Total wet mass
B Void volume
C Mass of dry soil
D Mass of solids plus water
Answer: C. Mass of dry soil. Gravimetric water content uses water mass over dry soil mass.
Degree of saturation compares water volume with which volume?
A Total volume
B Void volume
C Solid volume
D Pore-air volume
Answer: B. Void volume. Saturation Sr is the fraction of the void space occupied by water.
Specific gravity of soil solids compares solid density with what?
A Dry density
B Air density
C Bulk density
D Water density
Answer: D. Water density. Gs is the density of soil solids divided by water density at the reference condition.
Bulk unit weight is total soil weight divided by what?
A Solid volume
B Total volume
C Void volume
D Water volume
Answer: B. Total volume. Bulk unit weight includes solids and water over the whole soil volume.
Dry unit weight uses which mass contribution?
A Soil solids only
B Solids and water
C Water only
D Solids and air
Answer: A. Soil solids only. Dry unit weight excludes pore water and uses the solids weight over total volume.
A fully saturated soil has which degree of saturation?
A 0 percent
B 50 percent
C 100 percent
D Less than 10 percent
Answer: C. 100 percent. At full saturation, all voids are occupied by water.
The liquid limit marks a boundary between which states?
A Solid and semisolid
B Plastic and liquid
C Dry and saturated
D Elastic and plastic
Answer: B. Plastic and liquid. The liquid limit separates the plastic and liquid consistency states.
Plasticity index equals which difference?
A Plastic minus shrinkage limits
B Water content minus LL
C Liquid minus plastic limits
D Void ratio minus porosity
Answer: C. Liquid minus plastic limits. PI is LL minus PL and represents the plastic range of water contents.
A well-graded soil generally has what particle-size feature?
A One uniform size
B Wide size range
C Only clay particles
D No coarse particles
Answer: B. Wide size range. Well-graded soils contain a broad distribution of particle sizes.
Sieve analysis is most useful for determining what?
A Coarse particle sizes
B Pore-water pressure
C Clay mineral activity
D Soil compressibility
Answer: A. Coarse particle sizes. Sieve analysis separates and quantifies particle-size fractions using mesh openings.
Hydrometer analysis estimates sizes of which particles?
A Fine soil particles
B Large gravel
C Concrete aggregate only
D Steel fibers
Answer: A. Fine soil particles. Hydrometer analysis uses settling behavior to assess fine silt and clay fractions.
Soil compaction mainly reduces which part of the soil?
A Air voids
B Solid particles
C Mineral density
D Grain size
Answer: A. Air voids. Mechanical compaction rearranges particles and expels air from the voids.
Optimum moisture content corresponds to what in a compaction test?
A Minimum bulk volume
B Zero air voids
C Maximum dry unit weight
D Maximum water content
Answer: C. Maximum dry unit weight. At the optimum water content, the specified compactive effort produces maximum dry density.
Relative density is primarily used for which soils?
A Organic peat only
B Cohesionless soils
C Highly plastic clays
D Cemented rock
Answer: B. Cohesionless soils. Relative density describes the compactness of granular, cohesionless soils.
Capillary rise is usually greatest in which pore system?
A Large open pores
B Dry cracks only
C Small pores
D Uniform gravel
Answer: C. Small pores. Smaller pore radii produce greater capillary rise because of surface tension.
Under Darcy flow, discharge is proportional to what?
A Grain color
B Plasticity index
C Hydraulic gradient
D Specific gravity only
Answer: C. Hydraulic gradient. For laminar seepage through soil, Darcy discharge varies linearly with hydraulic gradient.
Hydraulic gradient is head loss divided by what?
A Soil mass
B Flow length
C Void ratio
D Cross-sectional area
Answer: B. Flow length. The hydraulic gradient i is the head loss over the seepage length.
Which unit is commonly used for hydraulic conductivity?
A Force per area
B Mass per volume
C Time per length squared
D Length per time
Answer: D. Length per time. Hydraulic conductivity has dimensions of velocity, such as metres per second.
Compared with clean sand, clay usually has what permeability?
A Much higher permeability
B Identical permeability
C Infinite permeability
D Much lower permeability
Answer: D. Much lower permeability. Clay’s very small pore channels generally result in much lower hydraulic conductivity.
Effective stress for saturated soil equals total stress minus what?
A Pore-water pressure
B Dry unit weight
C Shear stress
D Capillary height
Answer: A. Pore-water pressure. Terzaghi’s effective stress relation is sigma-prime equals total stress minus pore pressure.
In hydrostatic water, pore pressure changes with depth according to what?
A Water head
B Grain diameter
C Plasticity index
D Compactive effort
Answer: A. Water head. Hydrostatic pressure increases with the vertical depth below the water surface.
An upward seepage gradient can cause quick condition by doing what?
A Reducing effective stress
B Increasing grain size
C Eliminating pore water
D Increasing dry weight
Answer: A. Reducing effective stress. Upward seepage force reduces effective stress and can bring it close to zero at the critical gradient.