Answer: B. Downslope rock and soil movement. Mass wasting is the gravity-driven downslope movement of rock and soil. It includes slow creep as well as rapid landslides, falls, and flows.
Which force directly drives mass wasting?
A Wind pressure
B Ocean currents
C Magnetic attraction
D Gravity
Answer: D. Gravity. Gravity pulls slope material downslope. Water, earthquakes, and human changes may trigger or assist movement, but gravity remains the direct driving force.
A boulder detaches from a cliff and bounces downhill. Which movement fits best?
A Rockfall
B Soil creep
C Translational slide
D Lateral spread
Answer: A. Rockfall. Rockfalls involve fragments detaching from steep slopes and falling, bouncing, or rolling downslope. They commonly leave angular debris near the cliff base.
Which process moves soil downhill extremely slowly?
A Debris flow
B Rock topple
C Creep
D Rock avalanche
Answer: C. Creep. Creep is very slow, steady downslope movement of slope-forming soil or rock. It can be difficult to notice until fences, trees, or buildings become displaced.
A coherent block rotates backward along a curved failure surface. What is it?
A Rockfall
B Lateral spread
C Rotational slump
D Translational slide
Answer: C. Rotational slump. A slump is a rotational slide. Its moving mass follows a curved surface and commonly tilts backward as it moves downslope.
A rapid slurry of water, soil, and rock is called a:
A Debris flow
B Topple
C Rockfall
D Soil creep
Answer: A. Debris flow. A debris flow is a fast-moving mixture of water-saturated sediment and rock. It can behave like wet concrete and travel down slopes or channels.
Which event commonly triggers slope failure by adding water?
A Earthquake shaking
B Slope excavation
C Vegetation removal
D Intense rainfall
Answer: D. Intense rainfall. Heavy rainfall can saturate slope materials and alter stresses within them. It is a common trigger, though landslides also have other natural and human causes.
Angular rock fragments collected beneath a cliff form a:
A River delta
B Talus slope
C Sand dune
D Floodplain
Answer: B. Talus slope. Rock fragments that fall from a steep cliff often accumulate at its base as talus. These deposits are commonly coarse and angular.
A slide moving along a nearly flat surface is usually:
A Translational
B Free-falling
C Rotational
D Creeping
Answer: A. Translational. A translational slide moves along a roughly planar surface, with little rotation. Weak bedding planes or other continuous zones can guide this movement.
Which motion distinguishes a topple from a simple fall?
A Slow soil deformation
B Flowing as slurry
C Rotation about a pivot
D Horizontal spreading
Answer: C. Rotation about a pivot. A topple rotates forward or outward around a pivot or base before falling. A simple fall mainly moves through the air, then may bounce or roll.
Solifluction commonly moves thawed soil over:
A Dry bedrock
B Frozen ground
C River gravel
D Open ocean
Answer: B. Frozen ground. Solifluction is slow downslope flow of water-saturated soil over frozen or otherwise impermeable ground. It is common in cold environments with seasonal thaw.
Loose mixed material deposited at a slope base is broadly called:
A Till
B Alluvium
C Loess
D Colluvium
Answer: D. Colluvium. Colluvium is loose, often poorly sorted material accumulated on or near slopes through gravity-driven movement and related slope processes.
Which process can remove support from a slope’s base?
A Toe deposition
B Bedrock cementation
C Slope vegetation
D Stream erosion
Answer: D. Stream erosion. Stream erosion can undercut a slope toe and reduce support. The overlying material may then become unstable, especially when combined with rain or weak layers.
Plant roots can help stabilize shallow slopes by:
A Adding water to soil
B Binding soil
C Increasing slope angle
D Removing root cover
Answer: B. Binding soil. Roots may reinforce near-surface soil and reduce erosion. Their effect depends on slope conditions; vegetation cannot prevent every landslide.
Which natural event can shake loose slope material?
A Slope saturation
B Toe erosion
C Earthquake
D Wind deposition
Answer: C. Earthquake. Earthquake shaking can trigger landslides and rockfalls, particularly where slopes or materials are already susceptible to failure.
A landslide may transport which material group?
A Rock, debris, or earth
B Only windblown dust
C Only dissolved salts
D Only clean water
Answer: A. Rock, debris, or earth. Landslides include downslope movement of rock, debris, or earth. Geologists describe them by both the material involved and how it moves.
Why can a slope become less stable after prolonged wet weather?
A Raises pore pressure
B Lowers gravity
C Strengthens weak layers
D Flattens the slope
Answer: A. Raises pore pressure. Water can add weight and increase pressure within slope materials. These changes may reduce stability, especially where drainage is poor or weak layers are present.
Why might wet debris travel farther downhill?
A Slope angle vanishes
B Gravity disappears
C Friction may decrease
D Particles gain cohesion
Answer: C. Friction may decrease. Water can reduce friction and raise pore-water pressure, increasing mobility in some flows. The effect varies with the material and slope.
What is a lahar?
A Volcanic debris flow
B Glacial icefall
C Desert dust storm
D Coastal sand slide
Answer: A. Volcanic debris flow. A lahar is a volcanic mudflow containing water and volcanic debris. It can move down a volcano’s flank or valley even without fresh lava.
A large, fragmented rock mass rushes rapidly downslope. Which movement is this?
A Soil creep
B Rock avalanche
C River meander
D Dune migration
Answer: B. Rock avalanche. A rock avalanche is a rapid, highly disrupted movement of rock debris downslope. It differs from slow creep by speed and widespread fragmentation.
A fence gradually tilts downslope while nearby tree trunks curve uphill near their bases. Which process is indicated?
A Debris flow
B Soil creep
C Rockfall
D Rotational slump
Answer: B. Soil creep. Slow soil creep can tilt posts and produce curved tree trunks as trees gradually adjust their growth. These are common clues of gradual slope movement.
Which slope condition generally raises landslide susceptibility?
A Steep, weak material
B Dry, unfractured rock
C Stable, vegetated ground
D Flat, strong bedrock
Answer: A. Steep, weak material. Steep slopes made of weak or loose material are more susceptible to movement, especially when water or another trigger changes their stability.
How can rapid snowmelt affect a slope?
A Remove gravity
B Strengthen every layer
C Stop groundwater flow
D Add infiltrating water
Answer: D. Add infiltrating water. Rapid snowmelt can supply water to slopes, increasing saturation and sometimes triggering landslides. Its effect depends on local geology and drainage.
Which statement about landslide speed is correct?
A It never changes
B It is always gradual
C It ranges widely
D It is always instantaneous
Answer: C. It ranges widely. Landslide movement ranges from imperceptibly slow creep to rapid, destructive flows. Speed depends on the material, slope, water, and movement process.
The steep exposed break at the upper edge of a landslide is the:
A Crown
B Toe
C Flank
D Head scarp
Answer: D. Head scarp. The head scarp is the steep exposed surface at the upper edge of a landslide. The toe lies at the lower end of the displaced material.