Manufacturing Processes MCQs (Set-4)

Fusion welding joins parts by melting what region?

A Only filler wire
B Only backing plate
C Base material edges
D Heat shield

Arc welding uses an electric arc as what?

A Filler material
B Shielding gas only
C Clamping force
D Heat source

Resistance welding heat is proportional to current squared, resistance and what?

A Pressure squared
B Electrode area
C Voltage only
D Time

Gas welding commonly uses which fuel gas with oxygen?

A Acetylene
B Nitrogen
C Argon only
D Carbon dioxide

TIG welding uses which electrode type?

A Consumable steel wire
B Nonconsumable tungsten
C Carbon rod only
D Copper plate

MIG welding feeds what as electrode and filler?

A Tungsten rod
B Carbon block
C Flux-coated plate
D Consumable wire

Flux-cored arc welding uses wire containing what?

A Water core
B Abrasive core
C Flux core
D Copper coolant

Brazing joins parts without melting what?

A Base metals
B Filler metal
C Flux
D Joint surfaces

Soldering uses filler metal with melting point below about what?

A 1000 degrees Celsius
B 450 degrees Celsius
C 1500 degrees Celsius
D 2000 degrees Celsius

The heat-affected zone is base material changed by what?

A Mechanical polishing
B Casting pressure
C Cold drawing
D Welding heat

Weld porosity is caused by trapped what?

A Forging grain flow
B Gas
C Tool wear
D Bend allowance

Dye penetrant inspection detects which flaws?

A Deep internal flaws only
B Temperature gradients
C Surface-breaking flaws
D Residual stress only

Radiographic testing is effective for detecting what?

A Internal volumetric flaws
B Surface color
C Dimensional tolerance only
D Hardness gradients

Ultrasonic testing uses what to find internal discontinuities?

A Visible light
B Magnetic flux only
C Chemical dye
D High-frequency sound waves

Additive manufacturing builds parts by adding what?

A Chips in passes
B Molten metal in mold only
C Material in layers
D Forging blows

Powder-bed fusion selectively melts what feedstock?

A Powder bed
B Solid bar only
C Liquid resin only
D Sheet stock only

Stereolithography cures what material with light?

A Steel powder
B Liquid photopolymer
C Wire filament
D Sand binder only

Fused-filament fabrication deposits what material form?

A Metal chips
B Liquid steel
C Thermoplastic filament
D Ceramic slurry only

Additive support structures are used to do what?

A Increase porosity
B Support overhangs
C Improve tool life
D Reduce layer count always

Laser cutting removes material using concentrated what?

A Water hammer
B Laser energy
C Rolling pressure
D Chemical etchant only

Waterjet cutting is useful for heat-sensitive materials because it adds what?

A Little heat
B High heat input
C A fusion zone
D A heat-affected zone

Electrochemical machining removes metal by what process?

A Abrasive fracture
B Melting and evaporation
C Anodic dissolution
D Mechanical shearing only

Adhesive bonding transfers load through what?

A Gear teeth
B Rivet shear only
C Thermal radiation
D Bonded interface

Spot welding joins overlapping sheets at what locations?

A Localized spots
B Continuous seam only
C Full surface fusion
D Threaded joints

A weld procedure specification defines what?

A Approved welding parameters
B Casting shrinkage
C Tool life only
D Gear ratio