Manufacturing Processes MCQs (Set-3)

Machining removes material in the form of what?

A Chips
B Risers
C Weld beads
D Forging flash only

In turning, which part normally rotates?

A Single-point tool only
B Milling cutter
C Drill press table
D Workpiece

Milling uses a rotating tool with how many cutting edges?

A One edge only
B Multiple edges
C No cutting edges
D Abrasive grains only

Drilling primarily produces what feature?

A Flat surface
B External thread only
C A round hole
D Gear tooth

Boring enlarges or corrects which existing feature?

A External shaft only
B Hole
C Flat face
D Casting riser

Reaming primarily improves hole size and what?

A Bore length only
B Material hardness
C Thread pitch
D Surface finish

Facing on a lathe produces what surface?

A Internal keyway
B Flat end face
C Gear tooth
D Thread flank

Cutting speed in turning depends on diameter and what?

A Spindle speed
B Feed per tooth only
C Tool rake
D Depth of cut only

Turning feed is commonly specified in what units?

A Millimetres per revolution
B Metres per second
C Degrees per tooth
D Newtons per metre

Depth of cut in turning is radial stock removed per what?

A Pass
B Revolution only
C Tool tooth
D Workpiece mass

Orthogonal cutting has cutting edge orientation what to cutting velocity?

A Parallel
B At 45 degrees always
C Random
D Perpendicular

Positive rake angle generally helps what?

A Increase tool rubbing
B Eliminate cutting force
C Prevent all wear
D Chip flow

Clearance angle prevents which tool surface from rubbing?

A Rake face
B Flank face
C Chip breaker
D Workholding jaw

Flank wear occurs on which tool surface?

A Rake face only
B Flank face
C Tool shank
D Workpiece underside

Crater wear develops mainly on which tool surface?

A Rake face
B Flank face only
C Tool holder
D Workpiece fixture

Taylor tool-life equation relates cutting speed to what?

A Surface roughness only
B Workpiece diameter
C Tool life
D Coolant flow

Cutting fluid can reduce friction and what?

A Heat
B Tool hardness
C Workpiece size
D Spindle speed to zero

A chip breaker is used to control what?

A Tool hardness
B Workpiece diameter
C Chip shape
D Cutting speed only

A built-up edge is material adhered to what?

A Cutting tool edge
B Machine bed
C Workpiece fixture
D Coolant filter

Grinding removes material with what?

A Molten metal
B Chemical solvent only
C Abrasive grains
D Forging dies

Wheel dressing restores grinding wheel shape and what?

A Workpiece hardness
B Machine speed only
C Cutting ability
D Coolant temperature

Honing is commonly used to improve what?

A External casting shape
B Sheet thickness
C Weld penetration
D Bore finish

EDM removes conductive material using what?

A Water pressure only
B Electrical discharges
C Abrasive belt
D Chemical etching only

EDM requires the workpiece to be what?

A Transparent
B Nonmetallic only
C Electrically conductive
D Magnetic only

Abrasive waterjet machining removes material using what?

A Thermal arc only
B Casting pressure
C Ultrasonic waves only
D High-speed fluid jet