Maintenance Engineering MCQs (Set-3)

Difficulty: Medium

Reliability-centered maintenance selects tasks based mainly on what?

A Paint condition
B Parts price
C Failure consequences
D Airport distance

What does an FMEA systematically examine?

A Failure modes and effects
B Fuel mixture only
C Tool calibration dates
D Aircraft paint layers

In an FMEA, what does a detection rating represent?

A Aircraft altitude
B Repair duration only
C Parts storage age
D Chance failure escapes detection

In a fault tree, an AND gate means the output occurs when what happens?

A Any input occurs
B All inputs occur
C No inputs occur
D One input is removed

What does an OR gate represent in a fault tree?

A All inputs are required
B No inputs are allowed
C Only one failure mode exists
D Any input can trigger output

A series system functions only when what is true?

A One component works
B Backup is installed
C Every component works
D All components fail

What is the effect of adding a parallel backup component?

A Raises failure rate always
B Improves fault tolerance
C Removes inspection needs
D Reduces available functions

How is failure rate commonly estimated from operating history?

A Failures per operating time
B Repairs per part mass
C Hours per inspection
D Cycles per tool

A maintenance program uses historical failure intervals. Which metric is relevant?

A Rudder travel
B Wing loading
C MTBF
D Fuel density

Which record best supports investigation of a repeated defect?

A Aircraft color log
B Detailed fault history
C Passenger count
D Route map

Which data is most useful for condition-based bearing maintenance?

A Paint thickness
B Cabin layout
C Fuel octane
D Vibration trend

What can a sudden rise in oil debris indicate?

A Internal component wear
B Improved lubrication
C Lower temperature
D Reduced vibration

A composite disbond is suspected inside a panel. Which method is suitable?

A Magnetic-particle inspection
B Ultrasonic inspection
C Hardness test
D Visual only

Why must NDI personnel be qualified for a test method?

A Increase inspection speed
B Avoid calibration
C Interpret indications correctly
D Change acceptance limits

Which factor can increase aircraft corrosion severity?

A Dry indoor storage
B Low flight hours only
C Fresh topcoat
D Humid salty environment

Galvanic corrosion risk rises when dissimilar metals are joined with what?

A Conductive moisture path
B Dry insulating gap
C Equal potentials
D Fresh lubricant only

What does a maintenance work package organize?

A Passenger baggage
B Flight routes
C Tasks and references
D Fuel prices

How does an airworthiness directive differ from a service bulletin?

A Bulletin is always mandatory
B AD is mandatory
C Both are optional
D AD is a maintenance log

Why run an operational test after maintenance?

A Change part traceability
B Raise cabin pressure
C Reduce inspection scope
D Verify system function

What should an independent inspection verify when required?

A Critical work completion
B Aircraft destination
C Fuel supplier
D Paint gloss

Why retain maintenance records after work?

A Increase reliability directly
B Show aircraft history
C Replace manuals
D Set aircraft category

A checklist is most useful for which purpose?

A Replace technical data
B Increase component wear
C Reduce omitted steps
D Avoid signoff

Which item is part of the FAA Dirty Dozen?

A Wing loading
B Fuel density
C Tool hardness
D Distraction

Why can fatigue increase maintenance error risk?

A Reduces attention and memory
B Improves reaction time
C Increases tool accuracy
D Removes time pressure

Root-cause analysis seeks to identify what?

A Paint defect only
B Repair cost
C Underlying failure cause
D Inspection interval