Difficulty: Easy & Basic
What is the primary purpose of aircraft maintenance?
A Preserve airworthiness
B Increase wing area
C Change aircraft category
D Raise cabin altitude
Answer: A. Preserve airworthiness. Maintenance keeps an aircraft in a condition for safe operation and continued airworthiness.
Scheduled maintenance is planned around which basis?
A Paint color
B Airport elevation
C Time or usage
D Passenger count
Answer: C. Time or usage. Scheduled tasks are performed at defined calendar, flight-hour, cycle, or condition intervals.
Unscheduled maintenance commonly begins after what?
A A new paint scheme
B A reported discrepancy
C A route change
D A passenger request
Answer: B. A reported discrepancy. Unscheduled work is initiated by a defect, malfunction, or inspection finding.
Preventive maintenance aims to do what?
A Increase fuel burn
B Remove inspection records
C Delay all repairs
D Reduce failure likelihood
Answer: D. Reduce failure likelihood. Preventive tasks are performed to reduce the chance of failures or deterioration.
Corrective maintenance is performed to do what?
A Restore failed function
B Increase inspection interval
C Change aircraft model
D Reduce tool inventory
Answer: A. Restore failed function. Corrective work addresses a detected failure or defect and restores required function.
Which document gives aircraft-specific maintenance procedures?
A Flight itinerary
B Passenger manifest
C Maintenance manual
D Weather report
Answer: C. Maintenance manual. The applicable maintenance manual provides procedures and limits for the aircraft or component.
What does a maintenance task card define?
A Aircraft paint code
B Passenger seating
C Fuel price
D Work steps and signoff
Answer: D. Work steps and signoff. Task cards identify required work, references, and completion records.
Where is completed maintenance recorded?
A Flight plan
B Maintenance records
C Cabin log only
D Fuel receipt
Answer: B. Maintenance records. Maintenance records document the work performed, references, and required approval.
An airworthiness directive generally requires what?
A Optional review
B Paint inspection only
C Mandatory compliance
D Passenger notification
Answer: C. Mandatory compliance. An FAA airworthiness directive is a legally enforceable rule requiring specified action.
Which tool measures applied fastener torque?
A Torque wrench
B Feeler gauge
C Borescope
D Vernier caliper
Answer: A. Torque wrench. A torque wrench applies or measures a specified tightening torque.
Why are inspection gauges calibrated?
A Increase part hardness
B Reduce fuel flow
C Remove surface flaws
D Ensure reliable readings
Answer: D. Ensure reliable readings. Calibration keeps measuring equipment tied to known standards and accuracy.
What does nondestructive inspection do?
A Cut parts apart
B Find flaws without damage
C Change alloy temper
D Add protective paint
Answer: B. Find flaws without damage. NDI examines components for discontinuities without impairing their future usefulness.
What is the simplest first inspection method?
A Visual inspection
B Radiography
C Magnetic particle
D Ultrasonic scan
Answer: A. Visual inspection. A careful visual inspection is a basic method for detecting visible damage or deterioration.
What should follow removal of aircraft corrosion?
A Bare metal exposure
B Extra sealant only
C Approved protection
D Immediate repainting without prep
Answer: C. Approved protection. Corrosion removal should be followed by approved protective treatment and finish restoration.
Why is lubrication applied to moving parts?
A Increase electrical resistance
B Change alloy strength
C Seal every fastener
D Reduce friction and wear
Answer: D. Reduce friction and wear. Lubrication reduces friction and wear when the correct lubricant and procedure are used.
What does a consumable maintenance item mean?
A Installed permanently
B Used during a task
C Never replaced
D Used only for inspection
Answer: B. Used during a task. Consumables such as sealants or lockwire are used up during maintenance work.
A component wear limit specifies what?
A Minimum fuel pressure
B Aircraft trim angle
C Maximum allowable wear
D Tool calibration date
Answer: C. Maximum allowable wear. Wear limits define when a part must be repaired or replaced.
FOD in a maintenance area means what?
A Foreign object debris
B Fuel operating data
C Flight order document
D Fastener output diameter
Answer: A. Foreign object debris. Foreign object debris can damage engines, systems, or aircraft structure.
Why should tools be counted after maintenance?
A Set landing trim
B Prevent tool FOD
C Measure corrosion
D Increase tire pressure
Answer: B. Prevent tool FOD. Tool control helps prevent tools from being left inside the aircraft or work area.
Which human factor can impair maintenance performance?
A Humidity only
B Paint shade
C Runway length
D Fatigue
Answer: D. Fatigue. Fatigue can reduce attention, memory, and decision quality during maintenance.
Why is a clear shift handover important?
A Increase torque
B Change part number
C Transfer task status
D Reduce inspection scope
Answer: C. Transfer task status. A structured handover communicates open tasks, hazards, and work status between shifts.
Why may a critical task require an independent inspection?
A Verify safety-critical work
B Reduce documentation
C Increase workload
D Skip functional checks
Answer: A. Verify safety-critical work. Independent inspection provides a second verification where the maintenance program requires it.
Before servicing energized equipment, what should be controlled?
A Paint thickness
B Hazardous energy
C Fuel price
D Cabin humidity
Answer: B. Hazardous energy. Applicable isolation and safety procedures control electrical, hydraulic, or other hazardous energy.
Who may approve an aircraft for return to service?
A Any passenger
B Parts supplier
C Dispatcher only
D Authorized person
Answer: D. Authorized person. Return-to-service approval must be made by a person authorized under applicable rules.
What should guide a repair beyond a general handbook?
A Social media post
B Uncontrolled sketch
C Approved aircraft data
D Unverified estimate
Answer: C. Approved aircraft data. Use applicable approved or acceptable technical data and manufacturer instructions for the specific repair.