Thermal radiation can travel through what?
A Only liquids
B Vacuum
C Only solids
D Only gases
Answer: B. Vacuum. Radiation is electromagnetic transfer and requires no material medium.
A blackbody absorbs what fraction of incident radiation?
A Half the radiation
B All incident radiation
C No radiation
D Only visible light
Answer: B. All incident radiation. A blackbody is an ideal absorber and emitter at every wavelength.
Stefan-Boltzmann law gives blackbody emissive power as what?
A Sigma T squared
B Sigma / T
C Sigma T to fourth
D T / sigma
Answer: C. Sigma T to fourth. Blackbody emissive power is E_b = σT⁴ using absolute temperature.
Emissivity compares real-surface emission with what?
A Reflected solar energy
B Convection heat rate
C Conductive flux
D Blackbody emission
Answer: D. Blackbody emission. Emissivity is the ratio of a surface’s emission to blackbody emission at the same temperature.
A gray surface has emissivity approximately independent of what?
A Temperature scale
B Wavelength
C Surface area
D View factor
Answer: B. Wavelength. A gray surface has wavelength-independent properties in the idealized model.
Absorptivity is the fraction of incident radiation that is what?
A Reflected
B Transmitted
C Absorbed
D Emitted
Answer: C. Absorbed. Absorptivity measures the portion of irradiation absorbed by a surface.
For an opaque surface, absorptivity plus reflectivity equals what?
A One
B Zero
C Two
D Emissivity squared
Answer: A. One. An opaque surface transmits no radiation, so α + ρ = 1.
Kirchhoff’s law relates emissivity to what at equilibrium?
A Absorptivity
B Reflectivity only
C Thermal conductivity
D View factor
Answer: A. Absorptivity. At thermal equilibrium and matching wavelength/direction, emissivity equals absorptivity.
A view factor is the fraction of radiation leaving one surface that reaches what?
A The fluid bulk
B The wall interior
C The point source only
D Another surface
Answer: D. Another surface. A geometric view factor describes direct radiative exchange between surfaces.
A convex surface has what self-view factor?
A One
B One-half
C Zero
D Infinite
Answer: C. Zero. A convex surface cannot directly see itself, so its self-view factor is zero.
Radiative reciprocity states AiFij equals what?
A AjFji
B Ai plus Aj
C Fij divided Aj
D Sigma times T
Answer: A. AjFji. The reciprocity relation is A_i F_ij = A_j F_ji.
View factors from one enclosure surface sum to what?
A Zero
B Area ratio
C One
D Emissivity
Answer: C. One. For a closed enclosure, the view factors from a surface sum to one.
Radiosity includes emitted radiation plus what?
A Conductive flux
B Reflected irradiation
C Fluid enthalpy
D Shaft work
Answer: B. Reflected irradiation. Radiosity is total radiation leaving a surface, including emission and reflection.
Irradiation is radiation that is what relative to a surface?
A Incident on it
B Emitted from it
C Conducted through it
D Stored within it
Answer: A. Incident on it. Irradiation G is the radiant energy arriving at a surface.
Absolute temperature for radiation calculations uses which scale?
A Celsius scale
B Fahrenheit scale
C Kelvin scale
D Rankine only
Answer: C. Kelvin scale. Radiation laws require absolute temperature, commonly kelvin in SI.
Radiative exchange increases strongly with temperature because of what power?
A First power
B Fourth power
C Second power
D Inverse power
Answer: B. Fourth power. Stefan-Boltzmann radiation varies with absolute temperature to the fourth power.
A radiation shield reduces heat transfer by adding what?
A Conductive bridges
B Radiating surfaces
C Open windows
D Fluid pumps
Answer: B. Radiating surfaces. Radiation shields add surface resistances and lower net radiative exchange.
A diffuse surface emits radiation how with direction?
A Only normal to surface
B Only tangentially
C Uniformly in direction
D Toward cold surfaces only
Answer: C. Uniformly in direction. A diffuse emitter has direction-independent intensity over its outward hemisphere.
A selective surface has properties that depend on what?
A Area only
B Density only
C Pressure only
D Wavelength
Answer: D. Wavelength. Selective surfaces have wavelength-dependent absorptivity and emissivity.
Net radiation from a hotter surface flows toward what?
A Colder surroundings
B Hotter surroundings only
C Higher pressure
D Larger mass
Answer: A. Colder surroundings. Net radiative energy flows from the higher-temperature surface to the lower-temperature surroundings.
A blackbody emissive power is determined by temperature and what constant?
A Gas constant
B Planck length only
C Specific heat
D Stefan-Boltzmann constant
Answer: D. Stefan-Boltzmann constant. The Stefan-Boltzmann constant sets the magnitude in E_b=σT⁴.
A radiosity-irradiation balance is useful for what analysis?
A Pipe friction
B Fluid mixing
C Spring design
D Enclosure radiation
Answer: D. Enclosure radiation. Radiosity methods solve radiative exchange among diffuse-gray enclosure surfaces.
An ideal blackbody has what emissivity?
A Zero
B One-half
C Infinite
D One
Answer: D. One. A blackbody emits the maximum possible radiation, so ε=1.
Transmissivity is zero for which ideal surface?
A Opaque surface
B Transparent surface
C Semitransparent gas
D Vacuum window
Answer: A. Opaque surface. Opaque materials transmit no incident radiation.
A radiation heat exchanger needs what geometric information?
A View factors
B Reynolds number only
C Pipe roughness
D Mass flow rate only
Answer: A. View factors. View factors describe the geometry of radiative exchange.