Heat Transfer MCQs (Set-1)

Fourier’s law describes heat transfer by what mode?

A Convection
B Radiation
C Advection only
D Conduction

Thermal conductivity measures a material’s ability to conduct what?

A Heat
B Electric current
C Momentum
D Sound

Thermal diffusivity equals conductivity divided by what?

A Density only
B Surface area
C Volumetric heat capacity
D Thermal resistance

For a plane wall, steady heat rate equals kAΔT divided by what?

A Wall area
B Thermal conductivity
C Wall thickness
D Time squared

Plane-wall conduction resistance is thickness divided by what?

A Area divided by k
B Specific heat
C k times area
D Density times volume

Thermal resistances in series are combined how?

A Multiply resistances
B Add the resistances
C Use smallest only
D Average the temperatures

Thermal contact resistance arises mainly from what?

A High bulk conductivity
B Large wall area
C Imperfect surface contact
D Uniform temperature

Heat rate through a composite wall uses total what?

A Area / density
B Mass / heat capacity
C Temperature difference / total resistance
D Conductivity times time

Cylindrical-wall conduction resistance contains which logarithm?

A ln(r2/r1)
B ln(T2/T1)
C ln(k2/k1)
D ln(L/r1)

Spherical-wall conduction resistance is proportional to what difference?

A r2 − r1 only
B 1/r1 − 1/r2
C ln(r2/r1)
D r1 plus r2

Uniform volumetric heat generation is denoted by what?

A Heat flux q double-prime
B q triple-prime
C Thermal resistance R
D Specific volume v

An adiabatic boundary has what heat flux?

A Maximum heat flux
B Constant temperature flux
C Zero heat flux
D Negative conductivity

At a plane of thermal symmetry, temperature gradient normal to plane is what?

A Zero
B Maximum
C Infinite
D Equal to conductivity

A fixed-temperature surface uses which boundary condition?

A Specified surface temperature
B Specified heat generation
C Specified density
D Zero conductivity

A fixed-heat-flux boundary specifies what?

A Surface mass
B Thermal diffusivity
C Wall thickness
D Surface heat flux

A fin increases heat transfer by increasing what?

A Wall conductivity only
B Fluid density
C Temperature difference to zero
D Exposed surface area

Fin efficiency is actual heat transfer divided by what?

A Ideal fin heat transfer
B Base heat capacity
C Conduction resistance
D Fluid mass flow

A fin with high conductivity generally has what temperature distribution?

A More uniform temperature
B Steeper gradient always
C Zero base temperature
D No heat transfer

Thermal conductivity is commonly measured in what units?

A J per kilogram
B W per square metre
C K per second
D W per metre kelvin

The negative sign in Fourier’s law indicates heat flows toward what?

A Higher pressure
B Lower temperature
C Greater density
D Higher velocity

Thermal energy stored in a solid is proportional to mass, specific heat and what?

A Surface roughness
B Temperature change
C Thermal conductivity
D Wall thickness

A larger thermal diffusivity means temperature changes spread how?

A More slowly
B Only at surface
C Not at all
D More rapidly

In a multilayer wall, interface temperature is found using what?

A Mass conservation only
B Ideal-gas law
C Bernoulli equation
D Heat balance and resistances

A perfect insulator has what conductivity?

A Zero conductivity
B Infinite conductivity
C Unit density
D Maximum emissivity

Adding contact resistance generally does what to heat rate?

A Increases heat rate
B Reduces heat rate
C Leaves it unchanged
D Reverses flow direction