Electrical Measurements MCQs (Set-1)

Where is an ammeter connected to measure branch current?

A In parallel
B In series
C Across an open gap
D Across only the source

An ideal ammeter has what internal resistance?

A Infinite
B Equal to load resistance
C Equal to source voltage
D Zero

How is a voltmeter connected across a component?

A In parallel
B In series
C Through a current transformer
D Across an open source

What internal resistance would an ideal voltmeter have?

A Zero
B One ohm
C Infinite
D Load resistance

A basic permanent-magnet moving-coil instrument directly measures which current?

A AC only
B Radio frequency only
C DC
D Displacement current only

Which instrument type can indicate both AC and DC without a rectifier?

A Moving-iron
B Basic PMMC
C Induction energy meter
D DC potentiometer

In a dynamometer wattmeter, where is the current coil placed?

A In series with load
B Across the load
C Across the pressure coil
D In the neutral only

Where is the pressure coil of an electrodynamic wattmeter connected?

A In series with load
B In series with ammeter
C Open-circuited
D Across the load

Which electrical quantity does a wattmeter indicate?

A Active power
B Reactive energy
C Apparent resistance
D Charge alone

Which unit is commonly registered by a consumer energy meter?

A kW
B kVA
C kWh
D A

What does a current transformer primarily reduce for measurement?

A Large primary current
B Supply frequency
C Load resistance
D Line-to-line voltage

A potential transformer is used to scale down which quantity?

A High current
B High voltage
C Power factor
D Resistance

Why must an energized current transformer secondary stay closed through a burden?

A Avoid dangerous high voltage
B Increase primary current
C Improve frequency
D Reverse its polarity

Which torque balances the pointer in a spring-controlled analog meter?

A Deflecting torque only
B Controlling torque
C Friction torque
D Braking torque only

What is the primary role of damping in a pointer instrument?

A Increase measurement range
B Change rated voltage
C Create deflecting torque
D Prevent oscillation

Eddy-current damping arises when a conductor moves through what?

A Static electric charge
B Thermal field
C Vacuum only
D Magnetic field

Closeness of a measurement to the accepted reference value is called what?

A Precision
B Accuracy
C Resolution
D Sensitivity

Close agreement among repeated readings is known as what?

A Accuracy
B Range
C Precision
D Linearity

What does instrument resolution describe?

A Maximum input voltage
B Average calibration age
C Smallest discernible change
D Power consumption

Calibration compares an instrument with what?

A Unknown load only
B Circuit ground
C Random reading
D Reference standard

Sensitivity of a measuring device is the ratio of output change to what?

A Supply frequency
B Zero offset
C Full-scale label
D Input change

Which error produces a repeatable bias in one direction?

A Systematic error
B Random error
C Quantization only
D Reading noise

Which error causes unpredictable scatter among repeated readings?

A Zero error only
B Random error
C Scale factor only
D Known offset

A balanced Wheatstone bridge is commonly used to find what?

A Line frequency
B Magnetic flux
C Unknown resistance
D Stored energy

In a null-type DC potentiometer, what happens to unknown-source current at balance?

A It becomes maximum
B It is zero
C It equals load current
D It reverses each cycle