DC Machines MCQs (Set-2)

What energy conversion occurs in a DC motor?

A Electrical to mechanical
B Mechanical to electrical
C Heat to light
D AC to DC only

In a running DC motor, induced back EMF has which polarity relative to supply?

A It aids supply
B It opposes supply
C It is always zero
D It is alternating externally

Ignoring brush drop, which equation is correct for a DC motor?

A Eb=V−IaRa
B Eb=V+IaRa
C Eb=IaRa−V
D Eb=V/Ia

Why is starting armature current high if full voltage is applied directly?

A Field flux is infinite
B Armature resistance is infinite
C Shaft torque is zero
D Back EMF is zero

What is the chief purpose of a DC motor starter?

A Limit starting current
B Increase line frequency
C Eliminate field flux
D Reverse commutator

A no-voltage release in a starter protects against what?

A High brush friction
B Core eddy currents
C Unexpected restart
D Excessive line frequency

Electromagnetic torque of a DC motor is proportional to what?

A Flux divided by speed
B Voltage times resistance
C Speed squared only
D Flux times armature current

At constant flux, what happens to developed torque if armature current doubles?

A It halves
B It doubles
C It quadruples
D It stays zero

Which product represents developed electromagnetic power in a DC motor?

A VIaRa
B Ia²/Ra
C Φ/Ra
D EbIa

Approximately, motor speed is proportional to which ratio?

A Flux to current
B Torque to resistance
C Back EMF to flux
D Current to voltage

Where is a DC shunt motor field winding connected?

A In series with armature
B Across each commutator bar
C In the shaft
D Across the supply

Which speed behaviour is typical of a DC shunt motor over moderate load changes?

A Unlimited speed change
B Zero speed at light load
C Exact synchronous speed
D Nearly constant speed

How is the field winding of a DC series motor connected?

A In series with armature
B Across the supply
C Across interpoles only
D Open at startup

Which motor type typically gives very high starting torque?

A DC shunt motor
B Induction generator
C DC series motor
D Synchronous condenser

Why must a DC series motor not be operated without a mechanical load?

A It has no armature current
B Its voltage becomes AC
C It may overspeed
D Its poles disappear

In a cumulative compound motor, how do shunt and series field fluxes combine?

A They cancel exactly
B They are perpendicular
C They aid each other
D They alternate each cycle

In a differential compound motor, the series field does what?

A Aids shunt field
B Opposes shunt field
C Replaces the armature
D Eliminates back EMF

To reverse a DC motor’s direction, which connection change works?

A Reverse both armature and field
B Increase both currents
C Reverse armature leads only
D Reduce supply frequency

If both armature and field polarities are reversed, how does motor direction change?

A It always reverses
B It remains the same
C It becomes random
D It stops permanently

At roughly fixed armature voltage, weakening the shunt field tends to do what to speed?

A Increase speed
B Decrease speed
C Make speed zero
D Reverse direction

Reducing armature voltage with unchanged field generally provides speed control where?

A Only above base speed
B Below base speed
C At infinite speed
D At fixed synchronous speed

A motor has V=220 V, Ia=10 A and Ra=1 Ω. What is back EMF, ignoring brush drop?

A 210 V
B 220 V
C 230 V
D 22 V

If flux is halved at fixed armature current, what happens to developed torque ideally?

A It halves
B It doubles
C It quadruples
D It stays unchanged

When a shunt motor load increases, its speed usually does what?

A Doubles exactly
B Drops slightly
C Rises without limit
D Becomes synchronous

What produces the field in a permanent-magnet DC motor?

A Shunt field current
B Series field current
C Commutator current only
D Permanent magnets