Chemical Process Calculations MCQs (Set-4)

Difficulty: Hard

Fresh A enters at 100 mol/h. A reactor converts 40% of its A inlet per pass. A separator removes all product and returns all unreacted A. At steady state, find the reactor’s A inlet rate.

A 250 mol/h
B 140 mol/h
C 100 mol/h
D 166.7 mol/h

Two binary streams, 10 mol/s at 20 mol% A and 15 mol/s at 60 mol% A, mix. A separator then removes 80% of the mixed A and no B. What mole fraction of A remains in the other product?

A 0.4400
B 0.6286
C 0.0880
D 0.1358

Dryer feed is 500 kg/h at 30% water on a wet basis. Product moisture is 5% on a dry basis. How much water evaporates?

A 132.5 kg/h
B 150.0 kg/h
C 17.5 kg/h
D 125.0 kg/h

Humid air at 100 kPa contains water at 3 kPa. Take molar masses of water and dry air as 18 and 29 kg/kmol. What is humidity ratio in kg water per kg dry air?

A 0.0186
B 0.0309
C 0.0192
D 0.0515

Methane burns completely with 25% excess O₂ relative to stoichiometric need. For 4 mol methane, what unreacted oxygen remains?

A 2 mol
B 1 mol
C 10 mol
D 8 mol

Feed to an isothermal reactor includes 12 mol/s of A at 50% conversion. Each mole of A reacted releases 80 kJ. Ignoring sensible changes, how much heat must be removed?

A 960 kW
B 80 kW
C 480 kW
D 160 kW

Some of a 100 kg/h feed containing 20 wt% solute bypasses a unit. The unit removes all solute from its portion and no water. If the combined outlet is 12 wt% solute, how much feed bypasses?

A 48.00 kg/h
B 40.00 kg/h
C 54.55 kg/h
D 60.00 kg/h

Initial tank inventory is 100 kg. Inflow is 10 kg/min and outflow is 4 kg/min for the first five minutes. Then both stop. What mass remains after ten minutes?

A 120 kg
B 100 kg
C 160 kg
D 130 kg

Feed contains 60 kg/h dissolved salt and 140 kg/h water. After evaporation and crystallisation, 100 kg/h liquid remains at 20 wt% salt. How much pure salt crystallises?

A 20 kg/h
B 80 kg/h
C 40 kg/h
D 60 kg/h

For A → B and 2A → C, extents are 3 mol and 2 mol respectively. How much A is consumed?

A 10 mol
B 7 mol
C 4 mol
D 5 mol

In a steady heater, 3 kg/s of liquid at cₚ = 2 kJ/(kg·K) receives 180 kW. Heat loss to ambient is 30 kW. Find its rise in temperature.

A 35 K
B 25 K
C 30 K
D 15 K

Ethane burns completely: 2C₂H₆ + 7O₂ → 4CO₂ + 6H₂O. Feed includes 4 mol C₂H₆, 14 mol O₂ and 56 mol N₂. Find dry product CO₂ mole fraction.

A 0.107
B 0.143
C 0.222
D 0.125

A liquid loop receives 5 kg/h of a nonreacting impurity. The purge contains 2 wt% impurity and no other outlet carries it. What purge rate is required at steady state?

A 10 kg/h
B 2.5 kg/h
C 250 kg/h
D 100 kg/h

Liquid streams of the same material mix adiabatically with constant cₚ. One flows at 2 kg/s and 20°C, the other 3 kg/s and 70°C. Find outlet temperature.

A 40°C
B 50°C
C 55°C
D 45°C

A separator gets 100 mol/h at 40 mol% A. Its first outlet is 30 mol/h at 80 mol% A. Find the A mole fraction in the other outlet.

A 0.3429
B 0.5714
C 0.1600
D 0.2286

Two reactions occur at extents of 2 and 3 mol/s. Their enthalpies are −50 and +20 kJ per mole of their respective reactions. With no sensible changes, how much heat must be removed?

A 100 kW
B 40 kW
C 160 kW
D 60 kW

Before specification, a recycle system has two degrees of freedom. An independent split fraction and independent product flow are then specified. How many degrees of freedom remain?

A Four degrees of freedom
B Two degrees of freedom
C One degree of freedom
D Zero degrees of freedom

Mixing 30 wt% and 10 wt% solute streams produces 25 wt%. What mass fraction comes from the stronger stream?

A 0.75
B 0.25
C 0.50
D 0.60

Reactions A → B and B → C take place. Feed is 10 mol A, no B or C. Outlet is 4 mol A, 4 mol B and 2 mol C. Find the extent of the first reaction.

A 4 mol
B 8 mol
C 2 mol
D 6 mol

Saturated vapour loses 1,200 kW to a cooler and its latent heat is 2,400 kJ/kg. With no other heat duty, what condensation rate follows?

A 0.50 kg/s
B 1.20 kg/s
C 0.20 kg/s
D 2.00 kg/s

At two measured states, a rigid ideal-gas tank is at 200 kPa and 300 K, then at 250 kPa and 375 K. Both pressures are absolute. Find the final-to-initial molar inventory ratio.

A 1.56
B 0.80
C 1.00
D 1.25

In a recycle loop, the reactor outlet contains 40 mol/h of unreacted A. The separator sends 75% of that A back and the rest leaves. Fresh A feed is 80 mol/h. Find overall A conversion.

A 72.7%
B 87.5%
C 50.0%
D 62.5%

Two component balances are independent in a nonreactive binary system. The overall mass balance is written as their sum. How many of the three balances are independent?

A One
B Three
C Zero
D Two

A closed tank of 200 kg liquid gains 24 MJ with no work or loss. Use constant specific heat of 4 kJ/(kg·K) and find the temperature rise.

A 30 K
B 3 K
C 48 K
D 12 K

Initial solvent inventory is 40 kg. During processing, 12 kg evaporates, 5 kg is added, and reaction consumes 3 kg of that species. Find final solvent mass.

A 28 kg
B 30 kg
C 46 kg
D 33 kg