Chemical Process Calculations MCQs (Set-3)

Difficulty: Medium

Feed enters a steady evaporator at 100 kg/h and 10 wt% salt. Only water leaves as vapour. Liquid product is 25 wt% salt. Find its flow rate.

A 100 kg/h
B 40 kg/h
C 25 kg/h
D 60 kg/h

For 2A + B → C, a batch starts with 8 mol A and 5 mol B. Which reactant limits complete conversion?

A B
B Neither reactant
C A
D Both equally

Gas contains 80 mol% N₂ and 20 mol% O₂. Using molar masses 28 and 32 kg/kmol, find mean molar mass.

A 28.8 kg/kmol
B 32.0 kg/kmol
C 30.0 kg/kmol
D 28.0 kg/kmol

Heat raises a liquid stream flowing at 2 kg/s by 25 K. With cₚ = 4 kJ/(kg·K), no loss and no phase change, what is the duty?

A 400 kW
B 50 kW
C 100 kW
D 200 kW

Feed at 80 kg/h and 25 wt% solute is diluted to 10 wt% using pure water. How much water is added?

A 60 kg/h
B 200 kg/h
C 80 kg/h
D 120 kg/h

At 100 kPa and 300 K, a gas flows at 45 m³/h. What is its volume flow at 200 kPa and 300 K for the same ideal-gas molar flow?

A 15.0 m³/h
B 22.5 m³/h
C 45.0 m³/h
D 90.0 m³/h

Moisture is 0.25 kg water per kg dry solids. What is the wet-basis moisture percentage?

A 25%
B 75%
C 20%
D 33.3%

If parallel reactions produce 12 mol desired product and 3 mol byproduct, what is the desired-to-byproduct molar selectivity?

A 4
B 0.25
C 3
D 15

At 200 kPa absolute, 300 K and an ideal gas molar rate of 2 kmol/h, what is actual volume rate using R = 8.314 kPa·m³/(kmol·K)?

A 12.47 m³/h
B 24.94 m³/h
C 49.88 m³/h
D 2.49 m³/h

In a consistency check, five unknown stream variables are connected by three independent balance equations and one independent specification. What are degrees of freedom?

A 4
B 0
C 1
D 2

Fresh A entering a once-through reactor is 20 mol/h. At 35% single-pass conversion, what rate of unreacted A leaves?

A 5 mol/h
B 35 mol/h
C 7 mol/h
D 13 mol/h

Mix 60 kg/h of 10 wt% solute with 40 kg/h of 25 wt% solute. Find the mixed mass percentage.

A 17.5%
B 16%
C 35%
D 15%

To evaporate 0.5 kg/s at a specified latent heat of 2,000 kJ/kg, find the latent heat rate.

A 1,000 kW
B 100 kW
C 2,000 kW
D 4,000 kW

In a humid gas at total pressure 100 kPa, water partial pressure is 2 kPa. What is water mole fraction in the ideal mixture?

A 0.98
B 2.00
C 0.20
D 0.02

Wet material of 100 kg contains 40 wt% water. What is moisture content on a dry basis?

A 0.667 kg/kg dry
B 1.500 kg/kg dry
C 0.400 kg/kg dry
D 0.600 kg/kg dry

Suppose 10 mol of A can theoretically produce 10 mol of P, but only 8 mol of P are recovered. What is yield on this theoretical basis?

A 20%
B 125%
C 80%
D 8%

A tank receives 5 kg/min and discharges 3 kg/min with no other transfer. How much does inventory grow over eight minutes?

A 24 kg
B 40 kg
C 8 kg
D 16 kg

With 90 kg of water and 46 kg of ethanol, find ethanol mole fraction using molar masses of 18 and 46 kg/kmol.

A 1/6
B 5/6
C 1/5
D 46/136

Feed delivers 20 kg/h of solute, and one separation outlet recovers 18 kg/h of it. What is the solute recovery?

A 10%
B 111%
C 18%
D 90%

For 2A + B → C, a batch has 10 mol A and 4 mol B. How much A remains after B is fully consumed?

A 4 mol
B 8 mol
C 2 mol
D 6 mol

Liquid flows at 2 m³/h and has density 850 kg/m³. What is the mass rate?

A 850 kg/h
B 1,700 kg/h
C 0.00235 kg/h
D 425 kg/h

Each mole that reacts absorbs 50 kJ. At 4 mol/s, what heat input maintains constant temperature if other energy terms are negligible?

A 12.5 kW
B 200 kW
C 54 kW
D 46 kW

Of 12 kg/s total flow, a stream carries 3 kg/s of A. An ideal splitter sends 40% of the total to one branch. How much A goes there?

A 0.4 kg/s
B 3.0 kg/s
C 1.2 kg/s
D 4.8 kg/s

Wet gas contains 10 mol% water and 18 mol% O₂. Find O₂ mole percentage on a dry basis.

A 20%
B 16.2%
C 28%
D 18%

For complete methane combustion, CH₄ + 2O₂ → CO₂ + 2H₂O. How many moles of O₂ are needed per mole of methane?

A 2 mol
B 1 mol
C 4 mol
D 0.5 mol