Difficulty: Easy & Basic
In the general material balance for a reacting species, what equals input minus output plus generation minus consumption?
A Mass fraction
B Reaction rate alone
C Total feed
D Accumulation
Answer: D. Accumulation. The difference between flows and reaction terms changes the amount held in the system.
How can a liquid mass flow be found from its volumetric flow?
A Subtract operating pressure
B Multiply by temperature
C Divide by molar mass
D Multiply by density
Answer: D. Multiply by density. Mass per unit volume times volume per unit time gives mass per unit time.
For an overall mass balance, why are chemical generation and consumption absent?
A Products equal reactants in moles
B All species stay unchanged
C Total mass is conserved
D Reactors cannot accumulate material
Answer: C. Total mass is conserved. Reactions rearrange atoms and change individual species. Total mass is conserved.
All components of a mixture are listed on a mass-fraction basis. What must their fractions sum to?
A The mixture density
B 0
C 100
D 1
Answer: D. 1. All components together account for the entire mixture mass.
Choose the usual meaning of a calculation basis.
A The upper flow specification
B A reference amount or time
C The final pressure limit
D A reaction rate constant
Answer: B. A reference amount or time. A basis sets an amount or time interval against which all the other quantities are calculated.
Which stream returns part of a process outlet upstream for reuse?
A Bypass stream
B Recycle stream
C Final product stream
D Fresh feed stream
Answer: B. Recycle stream. Recycle sends part of the process outlet back to an earlier point in the process.
Mass concentration is reported as kilograms of solute per cubic metre of solution. Which unit expresses it?
A kg/m³
B kmol/kg
C m³/kg
D kg/h
Answer: A. kg/m³. The numerator is solute mass and the denominator is solution volume, giving kilograms per cubic metre.
With all valves shut, a tank has no reaction, leaks or phase losses across its boundary. What happens to total mass inside?
A It always decreases
B It doubles with time
C It remains constant
D It depends on volume only
Answer: C. It remains constant. With no flow across the boundary, the tank’s total mass cannot change.
Mole fraction of a gas component is the component’s moles divided by what?
A Total mixture moles
B Component mass alone
C Total volumetric flow only
D Total mixture volume
Answer: A. Total mixture moles. Mole fraction measures the share of all moles supplied by that component.
For an ideal splitter, how do component mass fractions compare between outlet streams?
A They always differ
B They are always zero
C They are identical
D They sum to two
Answer: C. They are identical. An ideal splitter distributes flow without separating or enriching the components.
In SI units, density is mass divided by what?
A Molar rate
B Temperature
C Time
D Volume
Answer: D. Volume. Density is the mass contained in a unit volume.
Why is a purge taken from some recycle loops?
A Remove net accumulation equations
B Increase every component’s conversion
C Prevent inert buildup
D Eliminate product withdrawal
Answer: C. Prevent inert buildup. A purge removes material such as inert impurities that could otherwise build up in a circulating stream.
Identify the property that converts a substance’s number of moles to mass.
A Molar mass
B Relative humidity
C Mole fraction
D Vapour pressure
Answer: A. Molar mass. Multiplying moles by mass per mole gives the substance’s mass.
What happens to the accumulation term at steady state?
A It equals generation
B It is zero
C It grows continuously
D It equals inlet flow
Answer: B. It is zero. A steady inventory does not change with time, so its accumulation rate is zero.
What distinguishes a closed system from an open system?
A It contains no material
B No energy crosses its boundary
C Its temperature is fixed
D No mass crosses its boundary
Answer: D. No mass crosses its boundary. A closed system exchanges no mass with its surroundings. Heat or work may still cross its boundary.
Convert a volumetric flow rate of 2 L/s to m³/s.
A 0.002 m³/s
B 2.000 m³/s
C 2,000 m³/s
D 0.020 m³/s
Answer: A. 0.002 m³/s. One litre equals 10⁻³ cubic metres. Multiply 2 by that factor.
What unit expresses molar flow rate?
A m³/kg
B kmol/h
C kg/m³
D kJ/mol
Answer: B. kmol/h. Molar flow is the quantity of substance transferred per unit time.
Feed skips a process unit and merges with its outlet. What is that branch called?
A Purge stream
B Bypass stream
C Accumulation stream
D Recycle stream
Answer: B. Bypass stream. A bypass goes around a selected process unit and rejoins the process downstream.
In 40 kg of solution, 10 kg is solute. What is its mass fraction?
A 0.10
B 0.40
C 4.00
D 0.25
Answer: D. 0.25. Mass fraction is component mass divided by total mixture mass.
When a mixer, cooler and separator lie within one balance boundary, how is a stream wholly inside that boundary treated?
A Count only at inlet
B Count twice as product
C Omit from overall balance
D Add as reaction generation
Answer: C. Omit from overall balance. Internal transfers do not cross the outer boundary and cancel from the overall balance.
For NaCl dissolved in water, which substance is the solute?
A Sodium chloride
B Water
C Both are solvents
D Neither is solute
Answer: A. Sodium chloride. Sodium chloride is the dissolved component in the stated aqueous solution.
Specific volume is the reciprocal of which property?
A Mass density
B Specific heat
C Molar mass
D Mass flow rate
Answer: A. Mass density. Specific volume measures volume per unit mass.
Which equipment operation is meant to give outlet streams with different compositions?
A Recycle mixing
B Simple pipe transport
C Separation
D Ideal splitting
Answer: C. Separation. A separator partitions components to produce streams with different compositions.
For a process operated continuously, how do feed and product normally move?
A They never cross boundaries
B They flow during operation
C They appear only at shutdown
D They are all internal streams
Answer: B. They flow during operation. Continuous operation normally feeds material and withdraws products while the equipment is running.
Dry-basis moisture content uses which denominator?
A Liquid volume only
B Total wet sample mass
C Moles of vapour
D Dry solids mass
Answer: D. Dry solids mass. Dry-basis moisture is water mass divided by the mass of dry solids.