A 100 m traverse line is 10% of total traverse length. East misclosure is +0.2 m. Bowditch correction to its east departure is?
A +0.02 m
B -0.2 m
C +0.2 m
D -0.02 m
Answer: D. -0.02 m. Bowditch correction is opposite the misclosure and proportional to line length: -0.2 times 100 divided by 1000 equals -0.02 m.
A closed traverse has east error 0.6 m and north error 0.8 m. Find linear misclosure.
A 0.2 m
B 1.0 m
C 0.7 m
D 1.4 m
Answer: B. 1.0 m. Linear misclosure is the square root of 0.6 squared plus 0.8 squared, which is 1.0 m.
A hexagon has theoretical interior-angle sum 720°. Observed sum is 719° 30′. Find total correction.
A -30 minutes
B +1 degree
C Zero
D +30 minutes
Answer: D. +30 minutes. The observed sum is 30 minutes short, so the total correction must be +30 minutes.
A 100 m slope distance has 60 m vertical difference. Find horizontal distance.
A 80 m
B 40 m
C 60 m
D 120 m
Answer: A. 80 m. Horizontal distance equals the square root of 100 squared minus 60 squared, which is 80 m.
At 1:2500, a map area is 3.2 cm². Find ground area.
A 2000 m²
B 200 m²
C 800 m²
D 20,000 m²
Answer: A. 2000 m². One map centimetre represents 25 m, so one cm² represents 625 m²; 3.2 times 625 is 2000 m².
A 50 m line has azimuth 120°. Find east and north changes approximately.
A 25 E, 43.3 N
B 43.3 W, 25 N
C 43.3 E, 25 S
D 50 E, zero N
Answer: C. 43.3 E, 25 S. East change is L sin 120°=43.3 m; north change is L cos 120°=-25 m, meaning 25 m south.
A simple circular curve has radius 200 m and deflection angle 60°. Find tangent length.
A 100 m
B 115.5 m
C 173.2 m
D 200 m
Answer: B. 115.5 m. Tangent length T equals R tan(Δ/2): 200 times tan 30 degrees is about 115.5 m.
A simple circular curve has radius 200 m and deflection angle 60°. Find long chord.
A 100 m
B 173.2 m
C 230.9 m
D 200 m
Answer: D. 200 m. Long chord is 2R sin(Δ/2): 400 times sin 30 degrees is 200 m.
A benchmark RL is 50.000 m and backsight is 1.455 m. Find HI.
A 51.455 m
B 48.545 m
C 50.455 m
D 51.000 m
Answer: A. 51.455 m. Height of instrument equals known RL plus backsight: 50.000 plus 1.455 is 51.455 m.
A tape is 20 m nominal but 20.01 m actual. Correction to a 200 m measured length is?
A -0.10 m
B +0.01 m
C -0.01 m
D +0.10 m
Answer: D. +0.10 m. A long tape makes recorded lengths too small; correction is 200 times 0.01 divided by 20, or +0.10 m.
A 50 m tape warms 10°C; α=11.6×10⁻⁶/°C. Length correction is?
A -0.0058 m
B +0.00058 m
C +0.058 m
D +0.0058 m
Answer: D. +0.0058 m. Temperature correction is αLΔT: 11.6×10⁻⁶ times 50 times 10 equals +0.0058 m.
A level run has +0.03 m misclosure over 600 m. A point is 200 m along. Proportional correction is?
A +0.01 m
B -0.03 m
C +0.03 m
D -0.01 m
Answer: D. -0.01 m. A proportional correction is opposite the misclosure times distance fraction: -0.03 times 200/600 equals -0.01 m.
A pentagon's observed angle sum is 539° 40′. Equal correction per angle is?
A +4 minutes
B -4 minutes
C +20 minutes
D -20 minutes
Answer: A. +4 minutes. The theoretical sum is 540 degrees, 20 minutes above the observation; divide +20 minutes by five angles to get +4 minutes each.
Contours at 100 m and 110 m cross a 200 m horizontal distance. Find average slope percent.
A 2 percent
B 5 percent
C 10 percent
D 20 percent
Answer: B. 5 percent. Average slope is vertical difference over horizontal distance: 10/200 times 100 is 5 percent.
How many satellites are typically needed to solve 3D position and receiver clock bias?
A At least two
B At least four
C At least three
D At least five
Answer: B. At least four. The four unknowns are three coordinates and receiver clock bias, requiring at least four independent satellite measurements.
Independent distance errors have standard deviations 3 mm and 4 mm. Combined standard deviation is?
A 5 mm
B 1 mm
C 4 mm
D 7 mm
Answer: A. 5 mm. For independent errors, variances add: the combined standard deviation is sqrt(3 squared plus 4 squared), or 5 mm.
A line has length 100 m and azimuth 90°. What is its coordinate change?
A 100 m north
B 100 m west
C 100 m east
D 100 m south
Answer: C. 100 m east. With azimuth clockwise from north, 90 degrees points east, giving 100 m east and zero northing change.
A fore bearing is 230°. Find ideal back bearing.
A 50 degrees
B 130 degrees
C 230 degrees
D 410 degrees
Answer: A. 50 degrees. For a fore bearing above 180 degrees, subtract 180 degrees to obtain the back bearing: 50 degrees.
A 150 m horizontal sight has vertical angle 10°. Approximate height difference.
A 15 m
B 52.9 m
C 26.4 m
D 150 m
Answer: C. 26.4 m. Height difference is 150 times tan 10 degrees, approximately 26.4 m.
What is a key benefit of reciprocal levelling across an obstacle?
A Reduces collimation and curvature effects
B Removes all random error
C Measures map area
D Corrects tape temperature
Answer: A. Reduces collimation and curvature effects. Observations from both sides help cancel systematic effects such as collimation error and reduce curvature and refraction influence.
What does least-squares adjustment minimize?
A Total survey distance
B Number of benchmarks
C Sum of weighted squared residuals
D Contour interval
Answer: C. Sum of weighted squared residuals. Least squares estimates parameters by minimizing a weighted sum of squared observation residuals.
What should be done when a traverse misclosure exceeds tolerance?
A Distribute it without review
B Delete the control points
C Investigate observations and setup
D Change map scale
Answer: C. Investigate observations and setup. An excessive misclosure suggests a blunder or unacceptable observations and should be investigated before adjustment.
What does parallax in a telescope cause?
A Tape shrinkage
B Bearing reversal
C Reduces systematic leveling errors
D Contour displacement
Answer: C. Reduces systematic leveling errors. Parallax occurs when the image and crosshairs are not in the same focal plane, causing apparent movement as the eye shifts.
A 30 m line has rise 6 m. Find slope angle approximately.
A 6 degrees
B 11.3 degrees
C 20 degrees
D 30 degrees
Answer: B. 11.3 degrees. Slope angle is arctan(rise/run): arctan(6/30) is about 11.3 degrees.
What does a closed traverse provide that an open traverse lacks?
A More contour lines
B Geometric closure check
C Higher magnetic declination
D Automatic elevation datum
Answer: B. Geometric closure check. A closed traverse returns to a known point or closes geometrically, allowing a direct closure check.