Difficulty: Easy & Basic
Which panel group handles electronic aircraft functions?
A Hydraulic pack
B Landing gear
C Avionics suite
D Fuel manifold
Answer: C. Avionics suite. Avionics brings together electronic communication, navigation, display, and control equipment.
Why is VHF radio coverage usually line of sight?
A Earth blocks signals
B Clouds absorb them
C They use sound waves
D They need daylight
Answer: A. Earth blocks signals. VHF signals generally travel in straight paths, so terrain and the horizon limit coverage.
Which unit supports routine voice contact with ATC?
A DME receiver
B AHRS unit
C Weather radar
D COM transceiver
Answer: D. COM transceiver. The communication transceiver transmits and receives voice on assigned radio frequencies.
Which receiver commonly supports VOR and ILS signals?
A Audio panel
B NAV receiver
C ELT unit
D Radar altimeter
Answer: B. NAV receiver. A navigation receiver tunes ground-based aids such as VOR and ILS.
Which instruments use static pressure?
A Fuel and oil gauges
B Altimeter and VSI
C Turn and slip
D Engine tachometer
Answer: B. Altimeter and VSI. The altimeter and vertical-speed indicator use static pressure; the airspeed indicator uses pitot and static pressure.
What pressure enters the open end of a pitot tube?
A Cabin pressure
B Fuel pressure
C Oil pressure
D Impact pressure
Answer: D. Impact pressure. The pitot tube faces the airflow and senses impact pressure.
What does DME primarily provide?
A Slant-range distance
B Wind direction
C Runway heading
D Aircraft weight
Answer: A. Slant-range distance. Distance measuring equipment derives slant-range distance from radio signal travel time.
A VOR radial describes bearing in which direction?
A Toward the station
B Along the runway
C From the station
D Across the airway
Answer: C. From the station. A VOR radial is a magnetic bearing extending outward from the station.
What does a CDI needle show?
A Engine speed
B Cabin pressure
C Fuel remaining
D Course deviation
Answer: D. Course deviation. The course deviation indicator shows lateral displacement from the selected course.
Which ILS component guides runway centerline alignment?
A Localizer
B Glide slope
C Marker beacon
D DME
Answer: A. Localizer. The localizer supplies lateral guidance aligned with the runway centerline.
Which ILS component provides vertical approach guidance?
A Localizer
B Glide slope
C Outer marker
D Transponder
Answer: B. Glide slope. The glide slope provides vertical guidance for the instrument approach.
What does an aircraft transponder do?
A Measures air temperature
B Drives control surfaces
C Replies to interrogations
D Displays terrain
Answer: C. Replies to interrogations. A transponder replies to ground or airborne interrogations with coded information.
What does ADS-B Out broadcast?
A Cabin announcements
B Weather radar images
C Aircraft position data
D Fuel tank levels
Answer: C. Aircraft position data. ADS-B Out broadcasts aircraft position and other surveillance data to receivers.
Which system uses satellite signals for navigation?
A ADF receiver
B Marker beacon
C Radio altimeter
D GNSS receiver
Answer: D. GNSS receiver. A GNSS receiver uses signals from navigation satellites to determine position and time.
What does an FMS combine for flight planning?
A Route and performance data
B Cabin and galley settings
C Brake and tire status
D Paint and weight records
Answer: A. Route and performance data. A flight management system combines navigation, route, and aircraft performance information.
What does EFIS replace on many flight decks?
A Hydraulic actuators
B Mechanical flight displays
C Engine mounts
D Fuel pumps
Answer: B. Mechanical flight displays. Electronic flight instrument systems present flight information on electronic displays.
Which system supplies attitude and heading references?
A DME
B ELT
C AHRS
D ADF
Answer: C. AHRS. An attitude and heading reference system provides pitch, roll, and heading information.
Which sensor detects Earth’s magnetic field?
A Magnetometer
B Pitot tube
C Static port
D Rate gyro
Answer: A. Magnetometer. A magnetometer senses the Earth’s magnetic field to support magnetic heading computation.
Which unit computes air data from pressure sensors?
A Audio control panel
B Flight data recorder
C Rudder servo
D Air data computer
Answer: D. Air data computer. An air data computer processes pitot and static pressure inputs into airspeed and altitude data.
What can an autopilot maintain when properly engaged?
A Fuel quality
B Selected flight modes
C Hydraulic pressure
D Cabin temperature
Answer: B. Selected flight modes. The autopilot controls aircraft axes to maintain selected modes such as heading or altitude.
Which system warns of nearby transponder-equipped traffic?
A DME
B ADF
C TCAS
D ELT
Answer: C. TCAS. The traffic alert and collision avoidance system tracks nearby aircraft and can issue advisories.
What does a terrain warning system help prevent?
A Fuel contamination
B Radio interference
C Brake overheating
D Controlled flight into terrain
Answer: D. Controlled flight into terrain. GPWS or TAWS alerts crews to hazardous proximity to terrain.
Which system detects precipitation ahead of the aircraft?
A Weather radar
B Radio altimeter
C ADF
D VOR
Answer: A. Weather radar. Weather radar uses reflected radio energy to display precipitation intensity and location.
Which transmitter helps locate an aircraft after an emergency?
A DME
B ELT
C FMS
D AHRS
Answer: B. ELT. An emergency locator transmitter sends a distress signal that helps search-and-rescue teams locate an aircraft.
Why are standby flight instruments installed?
A Extra cabin lighting
B Faster radio tuning
C Backup flight reference
D Fuel balancing
Answer: C. Backup flight reference. Standby instruments provide essential flight information if primary displays or systems fail.