Automobile Electrical Systems MCQs (Set-3)

Difficulty: Medium

A 12 V source drives 4 Ω resistance. What current flows?

A 3 A
B 2 A
C 4 A
D 8 A

A 3 Ω resistor carries 4 A. What is its voltage drop?

A 7 V
B 1.3 V
C 12 V
D 24 V

A 12 V load draws 5 A. What electrical power does it use?

A 60 W
B 17 W
C 2.4 W
D 120 W

Three resistors of 2, 4, and 6 Ω are in series. Total resistance is what?

A 3 Ω
B 12 Ω
C 6 Ω
D 48 Ω

A 6 Ω and 3 Ω resistor are in parallel. Equivalent resistance is what?

A 3 Ω
B 4.5 Ω
C 9 Ω
D 2 Ω

An alternator supplies 70 A at 14 V. Output power is about what?

A 84 W
B 1,400 W
C 980 W
D 4.9 W

A 0.02 Ω connection carries 50 A. What voltage is lost?

A 0.4 V
B 1 V
C 2.5 V
D 25 V

A battery has 12.6 V open-circuit and 0.02 Ω internal resistance. At 100 A, terminal voltage is closest to what?

A 10.6 V
B 12.4 V
C 14.6 V
D 8.0 V

A 60 Ah battery supplies 3 A continuously. Ideal runtime is what?

A 10 hours
B 20 hours
C 30 hours
D 180 hours

A 50 mA parasitic draw continues for 24 hours. Charge used is what?

A 1.2 Ah
B 0.12 Ah
C 12 Ah
D 24 Ah

A 120 Ω relay coil is connected to 12 V. Coil current is what?

A 1 A
B 0.1 A
C 10 A
D 144 A

Two identical 12 V lamps are connected in parallel. If one opens, what happens?

A Both must go dark
B Both become 24 V
C The fuse always opens
D The other can stay lit

Two lamps are connected in one series path. If one opens, what happens?

A The other brightens
B Both go out
C Voltage doubles
D Current becomes unlimited

Which change reduces voltage drop in a long wire?

A Higher circuit current
B Longer wire length
C More corroded joints
D Larger conductor area

A starter draws 200 A from a 12 V battery. Input power is what?

A 2.4 kW
B 240 W
C 24 kW
D 0.06 kW

What electrical quantity reaches the alternator rectifier?

A Hydraulic pressure
B Alternating current
C Mechanical torque
D Coolant flow

If system voltage rises above its target, what can a regulator reduce?

A Tire pressure
B Starter pinion travel
C Alternator field current
D Spark-plug gap

What stores energy in an ignition coil before spark?

A Magnetic field
B Fuel pressure
C Rotor heat
D Spring compression

Why must ignition-coil dwell be sufficient?

A Cool the battery
B Increase tire grip
C Open the fuel rail
D Build primary current

Higher cylinder pressure generally does what to spark breakdown voltage?

A Lowers required voltage
B Removes the spark gap
C Raises required voltage
D Stops coil charging

A 1,000:1 ideal coil turns ratio receives 12 V primary. Secondary voltage is about what?

A 120 V
B 1.2 kV
C 12 kV
D 24 kV

Why can a poor engine ground affect ignition?

A It increases fuel octane
B It changes wheel alignment
C It widens the plug gap
D It weakens circuit return

What does an alternator field winding control?

A Magnetic strength
B Brake pressure
C Starter gear ratio
D Tire circumference

Which relation gives electrical power in a resistive load?

A P equals V over I
B P equals I over R
C P equals R times time
D P equals V times I

A 12 V, 24 W lamp draws what current?

A 0.5 A
B 12 A
C 2 A
D 288 A