Which component supplies stored electrical energy when the engine is off?
A Battery
B Alternator
C Starter motor
D Ignition coil
Answer: A. Battery. The battery stores electrical energy for starting and for vehicle loads when generation is unavailable.
What normally generates charging power with the engine running?
A Starter motor
B Fuse box
C Alternator
D Spark plug
Answer: C. Alternator. The engine drives the alternator, which supplies electrical loads and replenishes the battery.
Which motor turns the engine during starting?
A Cooling fan
B Fuel pump
C Starter motor
D Wiper motor
Answer: C. Starter motor. The starter motor cranks the engine until combustion can sustain operation.
What does an ignition coil provide in a spark-ignition engine?
A Fuel pressure
B Coolant flow
C High-voltage spark energy
D Brake force
Answer: C. High-voltage spark energy. The ignition coil raises low system voltage to the level needed for a spark plug discharge.
Which component engages the starter pinion with the flywheel ring gear?
A Starter solenoid
B Voltage regulator
C Alternator pulley
D Fuse link
Answer: A. Starter solenoid. The starter solenoid moves the pinion into engagement and switches heavy starter current.
What does an alternator rectifier convert?
A DC to AC
B AC to DC
C Heat to voltage
D Current to pressure
Answer: B. AC to DC. Alternator windings generate alternating current; rectifier diodes provide direct current for the vehicle.
Which unit controls alternator charging voltage?
A Voltage regulator
B Starter relay
C Ignition switch
D Battery tray
Answer: A. Voltage regulator. The regulator varies alternator field excitation to keep charging voltage within limits.
What is the main role of a fuse?
A Raise circuit voltage
B Store electrical energy
C Protect against excess current
D Increase starter torque
Answer: C. Protect against excess current. A fuse opens the circuit when current exceeds its designed rating for long enough.
How does an electrical relay operate?
A Low-current control switches load
B Fuel pressure closes contacts
C Heat turns the rotor
D A spring stores charge
Answer: A. Low-current control switches load. A small control current energizes the relay coil, which switches a higher-current circuit.
Why is a vehicle ground path needed?
A Increase battery voltage
B Cool the alternator
C Complete the circuit return
D Drive the starter pinion
Answer: C. Complete the circuit return. Current needs a return path to the source, often through chassis connections in conventional vehicles.
What is a wiring harness?
A A battery charging plate
B Bundled wires and connectors
C A starter drive gear
D A lamp reflector
Answer: B. Bundled wires and connectors. A harness groups and routes vehicle wires and connectors between components.
Which part creates the spark across a spark-plug gap?
A Fuel injector
B Ignition system
C Alternator rectifier
D Starter relay
Answer: B. Ignition system. The ignition system supplies correctly timed high voltage to fire the spark plug.
What does a glow plug do in a diesel engine?
A Ignites fuel by spark
B Helps cold starting
C Charges the battery
D Controls alternator speed
Answer: B. Helps cold starting. A glow plug heats the combustion chamber area to assist cold diesel starting.
Which device interrupts current when a fuse element melts?
A Relay coil
B Alternator rotor
C Starter pinion
D Fuse
Answer: D. Fuse. Melting of the fuse element breaks the electrical path and stops current flow.
What is the usual purpose of a charging warning lamp?
A Alert to charging-system fault
B Show low tire pressure
C Indicate brake-pad wear
D Display engine temperature
Answer: A. Alert to charging-system fault. A battery or charging lamp warns when the charging system is not operating as expected.
Which lamp signals that the driver is braking?
A Reverse lamp
B Fog lamp
C Parking lamp
D Brake lamp
Answer: D. Brake lamp. Brake lamps illuminate when the service brake is applied to warn following traffic.
What do turn indicators communicate?
A Intended turning direction
B Battery state of charge
C Engine speed
D Coolant temperature
Answer: A. Intended turning direction. Left or right indicators signal the driver’s intended direction change.
Which electrical device warns nearby road users with sound?
A Relay
B Horn
C Fuse
D Regulator
Answer: B. Horn. The horn produces an audible warning signal for other road users.
Where does a headlamp direct light?
A Engine compartment
B Fuel tank
C Brake drum
D Road ahead
Answer: D. Road ahead. Headlamps illuminate the road and surroundings in front of the vehicle.
What rotates the alternator rotor in a conventional engine layout?
A Brake cable
B Steering rack
C Drive belt
D Fuel rail
Answer: C. Drive belt. An engine-driven belt commonly transfers crankshaft rotation to the alternator pulley.
Which part converts battery current into starter rotation?
A Fuse box
B Glow plug
C Ignition switch
D Starter motor
Answer: D. Starter motor. Current in the starter motor creates torque that turns its armature and drive.
What does the ignition switch commonly control?
A Wheel alignment
B Vehicle electrical modes
C Fuel octane
D Brake friction
Answer: B. Vehicle electrical modes. The ignition switch selects off, accessory, run, and start functions in many conventional vehicles.
What is a common job of a starter relay?
A Regulate tire pressure
B Cool ignition coils
C Adjust valve timing
D Switch starter control current
Answer: D. Switch starter control current. A starter relay lets a low-current control circuit command the starter-solenoid circuit.
Why are headlamps wired through protected circuits?
A Increase wheel torque
B Reduce engine compression
C Prevent wiring damage
D Change tire traction
Answer: C. Prevent wiring damage. Circuit protection limits damage if a short or excessive current occurs in lighting wiring.
What should a driver do if a fuse blows repeatedly?
A Replace the fuse again
B Fit a higher-rated fuse
C Bridge the fuse holder
D Repair the underlying fault
Answer: D. Repair the underlying fault. Repeated fuse failure signals an overcurrent or short; find and repair its cause without bypassing circuit protection.