Aerospace Manufacturing MCQs (Set-2)

Difficulty: Easy & Basic

Fusion welding joins parts by what action?

A Adding rivets
B Melting base material
C Layering dry fibers
D Cold rolling only

During brazing, what happens to the base metals?

A They fully vaporize
B They become powder
C They are cold forged
D They remain unmelted

What holds reinforcement plies against a tool during vacuum bagging?

A Atmospheric pressure
B Magnetic force
C Centrifugal force
D Ultrasonic vibration

A composite release film is placed where?

A Inside the fuel line
B Under a rivet head
C Between layup and bag
D Between brake discs

Why use a caul plate over a laminate?

A Measure fiber length
B Create a threaded hole
C Remove surface corrosion
D Spread consolidation pressure

Prepreg out-time tracks exposure to what?

A X-ray radiation
B Room-temperature conditions
C Cutting coolant
D Magnetic fields

Why is prepreg stored frozen?

A Increase fiber diameter
B Remove carbon fibers
C Slow resin advancement
D Raise moisture content

Which ply direction aligns fibers with the main load?

A Along load direction
B Across all loads
C Random direction
D Through-thickness only

Why are multiple composite ply angles used?

A Remove the resin
B Carry varied load directions
C Increase core porosity
D Avoid curing

A tapered change in laminate thickness is called what?

A Core splice
B Rivet pitch
C Trim allowance
D Ply drop

What bonds the skins to a honeycomb core?

A Hydraulic fluid
B Fuel sealant only
C Structural adhesive
D Primer alone

Which NDT method is commonly used to find composite delamination?

A Ultrasonic inspection
B Magnetic particle
C Hardness testing
D Spark testing

A simple tap test is most useful for finding what?

A All alloy chemistry
B Near-surface disbond
C Deep metal cracks
D Exact fiber volume

Which machine measures complex part geometry in three dimensions?

A Rockwell hardness tester
B Eddy-current probe
C Ultrasonic cleaner
D Coordinate measuring machine

Which instrument can measure large aircraft assemblies from a distance?

A Laser tracker
B Dial indicator
C Micrometer
D Borescope

What does a go/no-go gauge determine?

A Exact alloy chemistry
B Composite cure depth
C Within tolerance or not
D Surface temperature

Surface roughness describes what?

A Part mass
B Texture of a surface
C Alloy grade
D Hole position

Why is stress relief heat treatment used?

A Add fiber orientation
B Increase surface porosity
C Remove all alloying elements
D Reduce residual stress

What does shot peening create at a metal surface?

A Tensile core stress
B A resin coating
C Compressive residual stress
D A bonded laminate

Why is aluminum anodized?

A Improve corrosion resistance
B Increase electrical conductivity
C Remove all oxides
D Reduce alloy strength

A chemical conversion coating primarily prepares aluminum for what?

A Deep-hole drilling
B Composite layup
C Heat treatment
D Corrosion protection and paint

Why are support structures built with some metal AM parts?

A Increase fuel flow
B Hold overhangs in place
C Set magnetic heading
D Measure powder size

What is done to reusable metal AM powder before reuse?

A Sieve and inspect it
B Mix with coolant
C Melt in open air
D Paint every particle

Which process can relieve stress after additive manufacturing?

A Dye penetrant
B Riveting
C Heat treatment
D Shot blasting only

Why document surface finish after machining?

A Measure fuel quantity
B Verify drawing requirements
C Set rudder travel
D Confirm cabin pressure