Uniform 3 kN/m loading covers a 4 m cantilever. What is the fixed-end moment magnitude?
A 6 kN·m
B 12 kN·m
C 24 kN·m
D 48 kN·m
Answer: C. 24 kN·m. The resultant is 12 kN at the midpoint; its moment is 12×2=24 kN·m.
Over a 10 m simple span, 2 kN/m UDL plus a 10 kN midspan load give what reaction at each support?
A 10 kN
B 15 kN
C 20 kN
D 30 kN
Answer: B. 15 kN. Total loading is 20+10=30 kN and symmetry splits it equally.
Preventing slide down a 30° incline requires what minimum μs?
A 0.333
B 0.577
C 0.500
D 0.866
Answer: B. 0.577. At impending downward motion μs=tan 30°≈0.577.
Using μs=0.30 and N=500 N, what is maximum static friction?
A 30 N
B 167 N
C 500 N
D 150 N
Answer: D. 150 N. The limiting value is μsN=0.30×500=150 N.
Under a 100 N pull at 30°, a 200 N block has what normal reaction?
A 100 N
B 173 N
C 200 N
D 150 N
Answer: D. 150 N. Vertical equilibrium gives N+100 sin30°−200=0, hence N=150 N.
For a belt at impending slip, the tight/slack tension ratio follows which relation?
A e^(μθ)
B μθ
C e^(μ/θ)
D μ+θ
Answer: A. e^(μθ). The capstan relation is T_tight/T_slack=e^(μθ), with θ measured in radians.
Tipping begins about which contact edge?
A Tipping edge
B Its mass center
C The far support
D The global origin
Answer: A. Tipping edge. At impending tip, the contact resultant reaches the edge and moment balance is taken about that tipping edge.
Ideal two-force members transmit what at their ends?
A A pure couple
B Collinear opposite forces
C Perpendicular force pairs
D A distributed load
Answer: B. Collinear opposite forces. Equilibrium of a member loaded only at two ends requires equal, opposite, collinear end forces.
Planar truss section cuts can directly solve how many unknown member forces?
A One
B Two
C Three
D Six
Answer: C. Three. A planar free body supplies three independent equilibrium equations, so a section is normally chosen to cross at most three unknown member forces.
How many independent scalar equilibrium equations exist for a planar rigid body?
A Two
B Four
C Three
D Six
Answer: C. Three. Planar equilibrium uses ΣFx=0, ΣFy=0, and ΣM=0.
Given a T-section with 100×20 mm flange and 20×80 mm web below, what centroid height is measured from bottom?
A 40.0 mm
B 67.8 mm
C 50.0 mm
D 90.0 mm
Answer: B. 67.8 mm. The web area is 1600 mm² at 40 mm; the flange is 2000 mm² at 90 mm. The weighted centroid is 244000/3600≈67.8 mm.
Rectangular area 100×50 mm has what centroidal horizontal-axis I?
A 1.04×10⁶ mm⁴
B 2.08×10⁶ mm⁴
C 4.17×10⁵ mm⁴
D 1.25×10⁶ mm⁴
Answer: A. 1.04×10⁶ mm⁴. I=bh³/12=100×50³/12≈1.04×10⁶ mm⁴.
Shifting centroidal I=100000 mm⁴ for A=300 mm² by 20 mm gives what parallel-axis value?
A 220000 mm⁴
B 100000 mm⁴
C 120000 mm⁴
D 400000 mm⁴
Answer: A. 220000 mm⁴. The parallel-axis theorem gives I=100000+300×20²=220000 mm⁴.
Masses 2 kg at x=0 and 3 kg at x=4 m have what center of mass?
A 1.2 m
B 2.0 m
C 3.0 m
D 2.4 m
Answer: D. 2.4 m. The center coordinate is (2×0+3×4)/(2+3)=2.4 m.
Speeding a 2 kg body from 3 to 7 m/s requires what net work?
A 40 J
B 20 J
C 28 J
D 49 J
Answer: A. 40 J. Net work equals ΔK=½×2×(7²−3²)=40 J.
Starting at rest, a 2 kg body gains a 10 N·s impulse. What speed results?
A 2 m/s
B 5 m/s
C 10 m/s
D 20 m/s
Answer: B. 5 m/s. Impulse changes momentum by 10 kg·m/s, giving v=10/2=5 m/s.
Equal carts collide and stick; one moves at 4 m/s and one is still. What shared speed follows?
A 2 m/s
B 1 m/s
C 4 m/s
D 8 m/s
Answer: A. 2 m/s. Momentum conservation gives (m×4)/(2m)=2 m/s.
Identical masses collide elastically head-on; one starts at rest. What happens to the incoming mass?
A It doubles speed
B It stops
C It rebounds unchanged
D Both stop
Answer: B. It stops. For a one-dimensional elastic collision of equal masses, the velocities exchange.
Adding 12 N·s forward impulse to a 3 kg body’s initial 2 m/s gives what final speed?
A 4 m/s
B 5 m/s
C 6 m/s
D 8 m/s
Answer: C. 6 m/s. Initial momentum is 6 kg·m/s; adding 12 gives 18, so v=18/3=6 m/s.
Given I=2 kg·m² and net torque 10 N·m, what angular acceleration follows?
A 2 rad/s²
B 10 rad/s²
C 20 rad/s²
D 5 rad/s²
Answer: D. 5 rad/s². Rotational Newton’s law gives α=τ/I=10/2=5 rad/s².
Rolling without slip links center speed and angular speed by which relation?
A v = ω/R
B v = ωR²
C v = R/ω
D v = ωR
Answer: D. v = ωR. The no-slip rolling constraint is v=ωR.
Rotation at radius 0.4 m and 5 rad/s produces what centripetal acceleration?
A 10 m/s²
B 2 m/s²
C 5 m/s²
D 20 m/s²
Answer: A. 10 m/s². Centripetal acceleration is ω²r=25×0.4=10 m/s².
Assuming constant α, ω rises from 0 to 12 rad/s in 4 s. How far does it rotate?
A 12 rad
B 18 rad
C 24 rad
D 48 rad
Answer: C. 24 rad. Constant angular acceleration gives average ω=(0+12)/2=6 rad/s, so θ=6×4=24 rad.
Restitution e=0.5 makes separation speed what fraction of approach speed?
A One-quarter
B Equal speed
C Twice speed
D One-half
Answer: D. One-half. The coefficient of restitution is separation speed divided by approach speed along the impact line.
Three-dimensional rigid-body equilibrium requires how many scalar equations?
A Three
B Four
C Six
D Nine
Answer: C. Six. A 3D rigid body has three force-balance and three moment-balance equations.