Difficulty: Easy & Basic
Planar pin supports can provide which reaction components?
A One normal component
B A free couple only
C Horizontal and vertical
D Three force components
Answer: C. Horizontal and vertical. An ideal pin in a plane prevents translation in both directions but permits rotation.
In the ideal roller model, the support reaction points which way?
A Parallel to surface
B Along the beam
C Toward the centroid
D Perpendicular to surface
Answer: D. Perpendicular to surface. A frictionless roller support supplies one reaction normal to its supporting surface.
If θ is measured from +x, what is a force’s x-component?
A F sin θ
B F cos θ
C F tan θ
D F divided by θ
Answer: B. F cos θ. The horizontal component is F cos θ when θ is measured from the positive x-axis.
Same-direction collinear forces combine how?
A Add their magnitudes
B Subtract their magnitudes
C Multiply their magnitudes
D Average their magnitudes
Answer: A. Add their magnitudes. Forces along the same line and direction add algebraically.
Which construction combines two concurrent force vectors?
A Pythagorean rule always
B Parallelogram law
C Polygon area rule
D Bernoulli equation
Answer: B. Parallelogram law. The parallelogram law represents the vector sum of two concurrent forces.
Sliding a force along its line preserves which rigid-body effect?
A Internal stress distribution
B Contact area
C External rigid-body effect
D Material density
Answer: C. External rigid-body effect. The principle of transmissibility preserves the external effect on an ideal rigid body.
The direction of a moment vector follows which rule?
A Right-hand rule
B Left-hand screw rule
C Fleming’s rule
D Lami’s rule
Answer: A. Right-hand rule. Curling the right-hand fingers from r toward F sets the moment-vector direction.
Varignon’s theorem makes resultant moment equal to what?
A Product of component forces
B Sum of component moments
C Difference of support reactions
D Area under the beam
Answer: B. Sum of component moments. The moment of a force’s resultant equals the sum of the moments of its components about the same point.
Reducing a force system to point O requires what pair?
A Only its net force
B Only its net moment
C Resultant force and moment
D Mass and radius
Answer: C. Resultant force and moment. A force system can be replaced by its resultant force and the resultant moment about O.
Across length L, a uniform load w has what resultant magnitude?
A w/L
B wL²/2
C 2wL
D wL
Answer: D. wL. The resultant of a uniform distributed load equals its intensity times its loaded length.
Where does a uniform load’s resultant act?
A Loaded-length midpoint
B At the left support always
C At one-third length
D At the highest point
Answer: A. Loaded-length midpoint. The resultant acts through the centroid of the rectangular load diagram, at its midpoint.
Triangle-shaped loading that peaks at one end has what resultant magnitude?
A wmaxL/2
B wmaxL
C wmaxL²/2
D wmax/L
Answer: A. wmaxL/2. The area of a triangular load diagram is one-half its peak intensity times its length.
On a left-peaking triangular load, where does its resultant act?
A At the span midpoint
B Two-thirds from peak
C One-third from peak end
D At the far end
Answer: C. One-third from peak end. The triangular load diagram’s centroid lies one-third of its length from the larger-intensity end.
Two-force members carry end forces along which line?
A A perpendicular direction
B The global x-axis
C The centroidal axis
D Member axis
Answer: D. Member axis. With only two end forces and no couple, equilibrium requires them to be collinear with the member.
Ideal truss members primarily carry which internal action?
A Bending moment only
B Shear force only
C Axial tension or compression
D Torsion only
Answer: C. Axial tension or compression. Ideal pin-jointed truss members are two-force members and carry axial force.
Composite area centroids use which weighted average?
A ΣAᵢxᵢ/ΣAᵢ
B Σxᵢ/ΣAᵢ
C ΣAᵢ/Σxᵢ
D ΣAᵢxᵢ
Answer: A. ΣAᵢxᵢ/ΣAᵢ. The composite centroid coordinate is the area-weighted average of the component centroid coordinates.
Area moment of inertia has what dimension?
A Length to fourth power
B Length squared
C Length cubed
D Force times length
Answer: A. Length to fourth power. Area second moment of inertia has dimensions of length to the fourth power.
Radius of gyration k relates to area inertia I how?
A I = A/k²
B I = Ak²
C I = Ak
D I = A²k
Answer: B. I = Ak². The radius of gyration is defined so that I equals area times k squared.
Which expression shifts centroidal I to a parallel axis?
A IG − Ad
B IG + A/d²
C IGd² + A
D IG + Ad²
Answer: D. IG + Ad². The parallel-axis theorem adds A times the squared axis separation to the centroidal moment.
Rectangular area has what centroidal horizontal-axis inertia?
A b³h/12
B bh³/12
C bh²/6
D b²h³/12
Answer: B. bh³/12. For width b and vertical height h, I about the centroidal horizontal axis is bh³/12.
Perpendicular axes at O give polar inertia equal to what?
A Ix + Iy
B Ix − Iy
C IxIy
D Ix/Iy
Answer: A. Ix + Iy. The perpendicular-axis theorem gives polar area moment J_O=I_x+I_y for planar areas.
Coefficient of restitution compares which speeds?
A Tangential versus normal speed
B Separation versus approach speed
C Initial versus final height
D Force versus impulse
Answer: B. Separation versus approach speed. It is the relative speed of separation divided by the relative speed of approach along the impact line.
Impulse equals the change in which quantity?
A Angular displacement
B Potential energy
C Linear momentum
D Moment of inertia
Answer: C. Linear momentum. The impulse-momentum theorem states that impulse equals the change in linear momentum.
Angular velocity changes according to what quantity?
A Linear momentum
B Radius of gyration
C Static friction
D Angular acceleration
Answer: D. Angular acceleration. Angular acceleration is the time rate of change of angular velocity.
The work-energy theorem relates net work to change in what?
A Mass
B Angular displacement only
C Support reaction
D Kinetic energy
Answer: D. Kinetic energy. Net work on a body equals its change in kinetic energy.