Midspan loading of a simply supported 8 m beam: a 6 kN load gives what reaction at each support?
A 3 kN
B 1.5 kN
C 6 kN
D 12 kN
Answer: A. 3 kN. Symmetry gives equal reactions; each support carries half of the 6 kN load.
On a 6 m beam, a 12 kN load is 2 m from the left support. What is the left reaction?
A 4 kN
B 6 kN
C 12 kN
D 8 kN
Answer: D. 8 kN. Taking moments about the left gives the right reaction as 12×2/6=4 kN, so the left reaction is 8 kN.
Covering 3 m, a 4 kN/m uniform load has what resultant?
A 7 kN
B 4 kN
C 24 kN
D 12 kN
Answer: D. 12 kN. The resultant is intensity times length: 4×3=12 kN.
Resolve an 80 N force at 60° above x. What is its horizontal component?
A 40 N
B 69.3 N
C 80 N
D 20 N
Answer: A. 40 N. The horizontal component is 80 cos 60°=40 N.
Given a perpendicular 60 N force 0.25 m from a pivot, what moment results?
A 2.4 N·m
B 15 N·m
C 24 N·m
D 60 N·m
Answer: B. 15 N·m. The moment magnitude is 60×0.25=15 N·m.
Two opposite 12 N forces are 0.4 m apart. What couple moment do they form?
A 3 N·m
B 4.8 N·m
C 12.4 N·m
D 30 N·m
Answer: B. 4.8 N·m. A couple moment equals either force times the perpendicular spacing: 12×0.4=4.8 N·m.
Resting under a 40 N horizontal push, a 200 N block has what friction?
A 0 N
B 80 N
C 40 N
D 200 N
Answer: C. 40 N. Static friction balances the applied horizontal force while the block remains at rest.
Given μs=0.25 and N=100 N, what is limiting friction?
A 4 N
B 75 N
C 100 N
D 25 N
Answer: D. 25 N. Limiting static friction is μsN=0.25×100=25 N.
At a 30° angle of repose, what is the static-friction coefficient?
A 0.577
B 0.333
C 0.500
D 0.866
Answer: A. 0.577. At impending sliding, μs=tan φ; tan 30° is approximately 0.577.
Lami’s theorem relates each force to the sine of which angle?
A Adjacent acute angle
B Largest force angle
C Angle between other forces
D Right angle only
Answer: C. Angle between other forces. Lami’s theorem states that each of three concurrent equilibrium forces is proportional to the sine of the angle between the other two.
Perpendicular forces of 6 kN and 8 kN have what resultant magnitude?
A 10 kN
B 2 kN
C 14 kN
D 48 kN
Answer: A. 10 kN. The resultant is √(6²+8²)=10 kN.
From a 10 kN cable force at 30° above horizontal, what vertical component acts?
A 5 kN
B 8.66 kN
C 10 kN
D 2.5 kN
Answer: A. 5 kN. The vertical component is 10 sin 30°=5 kN.
Equal areas centered at x=0 mm and x=100 mm have what combined x-centroid?
A 25 mm
B 75 mm
C 50 mm
D 100 mm
Answer: C. 50 mm. Equal areas give the average coordinate: (0+100)/2=50 mm.
Areas 200 mm² at y=10 mm and 100 mm² at y=30 mm have what y-centroid?
A 13.3 mm
B 20 mm
C 26.7 mm
D 16.7 mm
Answer: D. 16.7 mm. The area-weighted coordinate is (200×10+100×30)/(200+100)=16.7 mm.
Pulling a block upward at an angle reduces which contact quantity?
A Mass
B Coefficient of friction
C Weight
D Normal reaction
Answer: D. Normal reaction. The upward component of the pull supports part of the weight, reducing the normal reaction.
What force must an unloaded non-collinear bar carry beside two collinear truss members?
A Maximum compression
B Zero force
C Equal tension
D Unknown couple
Answer: B. Zero force. Joint equilibrium requires the non-collinear member’s force to be zero when no external force acts at that joint.
Using a 3-4-5 direction triangle, a 500 N cable has what horizontal component?
A 300 N
B 500 N
C 400 N
D 100 N
Answer: C. 400 N. The horizontal fraction is 4/5, so the component is 500×4/5=400 N.
Compute the kinetic energy of a 2 kg body moving at 3 m/s.
A 3 J
B 9 J
C 6 J
D 18 J
Answer: B. 9 J. Kinetic energy is mv²/2=2×3²/2=9 J.
Lifting 100 N by 2 m in 5 s delivers what average power?
A 20 W
B 40 W
C 50 W
D 100 W
Answer: B. 40 W. The work is 100×2=200 J; dividing by 5 s gives 40 W.
Over 2 s, a constant 10 N force delivers what impulse?
A 5 N·s
B 12 N·s
C 40 N·s
D 20 N·s
Answer: D. 20 N·s. For constant force, impulse is FΔt=10×2=20 N·s.
Angular speed rises from 4 to 10 rad/s in 3 s. What is angular acceleration?
A 1 rad/s²
B 2 rad/s²
C 3 rad/s²
D 6 rad/s²
Answer: B. 2 rad/s². Angular acceleration is (10−4)/3=2 rad/s².
Rotation at radius 0.5 m and 4 rad/s gives what linear speed?
A 2 m/s
B 0.5 m/s
C 4.5 m/s
D 8 m/s
Answer: A. 2 m/s. Tangential speed is ωr=4×0.5=2 m/s.
Projectile motion without drag gives what vertical velocity at its highest point?
A Maximum upward
B Maximum downward
C Zero
D Equal to horizontal
Answer: C. Zero. At the highest point, vertical velocity is momentarily zero when air resistance is neglected.
Circular motion at 10 m/s and radius 5 m gives what normal acceleration?
A 20 m/s²
B 2 m/s²
C 10 m/s²
D 50 m/s²
Answer: A. 20 m/s². Normal acceleration is v²/r=100/5=20 m/s².
Rotating about its center, a slender rod has which mass moment of inertia?
A mL²/3
B mL²/2
C mL²/12
D mL²
Answer: C. mL²/12. The centroidal mass moment of inertia of a slender rod is mL²/12.