Difficulty: Easy & Basic
Static equilibrium of a rigid body requires which resultants to vanish?
A Net velocity and weight
B Zero net force and moment
C Mass and acceleration
D Pressure and density
Answer: B. Zero net force and moment. Static equilibrium requires both the resultant force and the resultant moment to be zero.
Which SI unit measures force?
A Newton
B Joule
C Watt
D Pascal
Answer: A. Newton. The SI unit of force is the newton, symbol N.
Moment about a point equals force times which distance?
A Total path length
B Cable diameter
C Body radius
D Perpendicular lever arm
Answer: D. Perpendicular lever arm. A force’s moment magnitude is its magnitude times the perpendicular distance from the point to its line of action.
In a free-body diagram, what is isolated?
A Only internal stresses
B The whole environment
C Body with external loads
D Only support geometry
Answer: C. Body with external loads. A free-body diagram separates the selected body and shows its external forces and couples.
Concurrent force lines meet at what location?
A Two parallel points
B A fixed axis
C One common point
D The mass center
Answer: C. One common point. Concurrent forces have lines of action that all pass through one point.
How many perpendicular components describe a planar force?
A Two components
B One component
C Three components
D Four components
Answer: A. Two components. A force in a plane can be resolved into two perpendicular components.
Which pair forms a pure couple?
A Unequal parallel forces
B Two collinear forces
C Three radial forces
D Equal opposite parallel forces
Answer: D. Equal opposite parallel forces. A couple consists of equal, opposite, parallel forces whose separated lines of action create a moment.
Perpendicular 3 N and 4 N forces have what resultant?
A 1 N
B 5 N
C 6 N
D 7 N
Answer: B. 5 N. The resultant magnitude is √(3²+4²)=5 N.
What property measures resistance to acceleration?
A Mass
B Weight
C Power
D Impulse
Answer: A. Mass. Mass measures inertia, the resistance of a body to acceleration.
Near Earth, an object’s weight is which force?
A Normal force
B Friction force
C Gravitational force
D Centripetal force
Answer: C. Gravitational force. Weight is the gravitational force acting on the body.
Where does a body’s weight act in a rigid-body model?
A Geometric corner
B Contact edge
C Instantaneous center
D Center of gravity
Answer: D. Center of gravity. The resultant gravitational force is represented as acting through the body’s center of gravity.
At a smooth surface contact, which reaction acts?
A Tangential friction
B Axial tension
C Normal reaction
D Applied couple
Answer: C. Normal reaction. A smooth contact has no friction; its reaction acts normal to the contacting surface.
Along a taut cable, tension acts in which direction?
A Along the cable
B Across the cable
C Toward the cable midpoint
D Normal to its axis
Answer: A. Along the cable. Tension acts along the cable and pulls away from the attached body.
Static friction opposes which tendency?
A Absolute position
B Gravity direction
C Body rotation always
D Impending relative motion
Answer: D. Impending relative motion. Static friction opposes the tendency for relative sliding at the contact.
The coefficient of friction is what type of quantity?
A Length-valued vector
B Force-valued scalar
C Dimensionless scalar
D Mass-valued vector
Answer: C. Dimensionless scalar. It is a ratio of friction force to normal force, so it has no units.
At impending sliding, limiting friction equals what?
A μs/N
B μsN
C N/μs
D μs+N
Answer: B. μsN. The maximum static friction is μs multiplied by the normal force.
Uniform thin plates use a centroid to represent which geometric point?
A Highest boundary point
B Geometric area center
C Friction center
D Rotation axis
Answer: B. Geometric area center. The centroid is the geometric center of an area; for uniform density it coincides with the center of mass.
Where do a triangle’s three medians intersect?
A Centroid
B Orthocenter
C Incenter
D Circumcenter
Answer: A. Centroid. The medians of a triangle meet at its centroid.
Rectangle symmetry places its centroid where?
A Longest side midpoint
B Diagonal intersection
C Any corner
D Outside the shape
Answer: B. Diagonal intersection. A rectangle is symmetric about both centerlines, which intersect at its centroid.
Constant-force work uses which vector product?
A Force dot displacement
B Force cross velocity
C Mass times speed
D Torque divided by angle
Answer: A. Force dot displacement. Work is the dot product of force and displacement.
One joule is equivalent to which unit product?
A Newton-metre
B Watt-second squared
C Pascal-metre
D Kilogram per second
Answer: A. Newton-metre. One joule equals one newton-metre of work.
Power measures the rate of doing what?
A Momentum
B Displacement
C Mass
D Work
Answer: D. Work. Power is work done per unit time.
Translational kinetic energy is given by which expression?
A mv
B mgh
C ma
D mv²/2
Answer: D. mv²/2. For a translating body, kinetic energy is one-half mass times speed squared.
Near Earth’s surface, gravitational potential energy is what?
A mv²/2
B mg/h
C mgh
D mh/g
Answer: C. mgh. For a small height change near Earth, gravitational potential energy is mgh relative to the chosen datum.
With constant mass, which law relates net force and acceleration?
A F = mv
B F = ma
C F = m/a
D F = a/m
Answer: B. F = ma. For constant mass, the net force equals mass times acceleration.