Difficulty: Medium
For ρ=1.0 kg/m³, V=40 m/s, S=16 m² and CL=0.5, estimate lift.
A 3,200 N
B 12,800 N
C 6,400 N
D 25,600 N
Answer: C. 6,400 N. L = ½ρV²SCL = 0.5 × 1.0 × 40² × 16 × 0.5 = 6,400 N.
At ρ=1.2 kg/m³ and V=50 m/s, what is dynamic pressure?
A 1,500 Pa
B 750 Pa
C 3,000 Pa
D 6,000 Pa
Answer: A. 1,500 Pa. q = ½ρV² = 0.5 × 1.2 × 50² = 1,500 Pa.
An aircraft makes 30 kN lift at q=1.5 kPa over S=20 m². Find CL.
A 0.5
B 1.5
C 2.0
D 1.0
Answer: D. 1.0. CL = L/(qS) = 30,000/(1,500 × 20) = 1.0.
A wing spans 15 m and has 25 m² planform area. Its aspect ratio is?
A 3.75
B 6
C 9
D 10
Answer: C. 9. AR = b²/S = 15²/25 = 9.
A wing has 0.75 m tip chord and 1.5 m root chord. Find taper ratio.
A 0.25
B 1.0
C 2.0
D 0.5
Answer: D. 0.5. Taper ratio equals tip chord divided by root chord.
For ρ=1.2, V=40 m/s, L=1 m, and μ=1.8×10⁻⁵ Pa·s, estimate Reynolds number.
A 2.67×10⁴
B 2.67×10⁵
C 2.67×10⁷
D 2.67×10⁶
Answer: D. 2.67×10⁶. Re = ρVL/μ = 1.2 × 40 × 1 /(1.8×10⁻⁵) ≈ 2.67 million.
With airspeed 240 m/s and sound speed 300 m/s, Mach number is?
A 0.40
B 0.80
C 1.25
D 1.80
Answer: B. 0.80. Mach number is speed divided by local sound speed.
A wing has M∞=0.8 and sweep Λ=30°. Its normal Mach component is about?
A 0.40
B 0.80
C 0.69
D 0.93
Answer: C. 0.69. The component normal to the leading edge is M∞cosΛ = 0.8cos30° ≈ 0.69.
As a subsonic wing approaches transonic conditions, which local feature may appear?
A Vacuum pocket
B Choked wake
C Supersonic patch
D Laminar shock
Answer: C. Supersonic patch. Local acceleration can produce a supersonic region even when freestream Mach is below one.
Critical Mach number is reached when what first happens locally?
A Flow reaches Mach 1
B Freestream reaches Mach 2
C Lift becomes zero
D Drag becomes zero
Answer: A. Flow reaches Mach 1. Critical Mach is the freestream condition at which a point on the aircraft first reaches Mach one.
For a normal shock in supersonic flow, downstream Mach becomes what?
A Subsonic
B Supersonic
C Exactly Mach 1
D Exactly zero
Answer: A. Subsonic. A normal shock reduces a supersonic upstream stream to subsonic downstream flow.
Across a normal shock, what happens to total pressure?
A It increases
B It decreases
C It stays constant
D It becomes zero
Answer: B. It decreases. A shock is irreversible and causes a loss of stagnation pressure.
How is the Mach angle μ related to Mach number M?
A cos μ = M
B tan μ = M²
C sin μ = 1/M
D μ = 1 + M
Answer: C. sin μ = 1/M. The Mach angle is the arcsine of the reciprocal Mach number.
At Mach 2, the Mach angle is approximately?
A 30 degrees
B 15 degrees
C 45 degrees
D 60 degrees
Answer: A. 30 degrees. μ = arcsin(1/2) = 30 degrees.
A negative pressure coefficient means local pressure is what?
A Above freestream
B Equal to stagnation
C Equal to zero
D Below freestream
Answer: D. Below freestream. Negative Cp indicates static pressure below the freestream static pressure.
If p=98 kPa, p∞=100 kPa and q∞=4 kPa, Cp equals?
A -2.0
B 0.5
C 2.0
D -0.5
Answer: D. -0.5. Cp = (p-p∞)/q∞ = (98-100)/4 = -0.5.
Which spanwise lift pattern gives minimum induced drag ideally?
A Uniform distribution
B Tip-loaded pattern
C Elliptical distribution
D Root-only loading
Answer: C. Elliptical distribution. Lifting-line theory gives minimum induced drag for an elliptical spanwise lift distribution.
For CL=0.8, e=0.8 and AR=8, estimate induced drag coefficient.
A 0.008
B 0.032
C 0.064
D 0.128
Answer: B. 0.032. CDi = CL²/(πeAR) = 0.64/(π × 0.8 × 8) ≈ 0.032.
At fixed lift and area, if dynamic pressure rises, required CL does what?
A It rises
B It stays constant
C It becomes negative
D It falls
Answer: D. It falls. CL = L/(qS), so a higher q requires a lower CL for the same lift.
Which two similarity parameters guide viscous and compressible model testing?
A Reynolds and Mach
B Lift and drag
C Area and span
D Pressure and temperature
Answer: A. Reynolds and Mach. Reynolds number represents viscous similarity; Mach number represents compressibility similarity.
An adverse pressure gradient means static pressure does what along the flow?
A Increases downstream
B Falls downstream
C Alternates rapidly
D Remains zero
Answer: A. Increases downstream. An adverse gradient is a pressure rise in the flow direction.
Boundary-layer displacement thickness represents what?
A Wingtip vortex radius
B Outward flow displacement
C Shock angle change
D Chordwise camber
Answer: B. Outward flow displacement. It measures the effective outward displacement of outer flow caused by the boundary layer.
A transonic shock produces a sudden rise in what near the surface?
A Mach angle
B Static pressure
C Wing span
D Sound speed
Answer: B. Static pressure. Static pressure rises across the shock and changes the surface pressure distribution.
What is CD0 commonly called?
A Zero-lift drag coefficient
B Maximum lift coefficient
C Induced drag coefficient
D Critical pressure coefficient
Answer: A. Zero-lift drag coefficient. CD0 denotes drag coefficient at zero lift in the usual drag polar.
At M∞=0.9, the freestream itself is formally what?
A Supersonic
B Subsonic
C Hypersonic
D Incompressible
Answer: B. Subsonic. Mach below one is subsonic, though local flow over a wing may be supersonic.