Difficulty: Easy & Basic
How is wing lift written using dynamic pressure and area?
A D = qSCD
B L = q/S
C L = ρVS
D L = qSCL
Answer: D. L = qSCL. Lift equals dynamic pressure times planform area times lift coefficient.
In q = ½ρV², which quantity is squared?
A Airspeed
B Density
C Wing area
D Lift coefficient
Answer: A. Airspeed. Dynamic pressure varies with the square of speed.
What is an airfoil?
A Engine inlet
B Fuselage station
C Tail assembly
D Wing cross-section
Answer: D. Wing cross-section. An airfoil is the cross-sectional shape of a wing or blade.
Which reference line joins the leading and trailing edges?
A Span line
B Thrust line
C Chord line
D Wake line
Answer: C. Chord line. The chord line connects the airfoil’s front and rear edges.
A wing’s front boundary is called what?
A Trailing edge
B Chord line
C Root fillet
D Leading edge
Answer: D. Leading edge. The leading edge is the forward boundary encountered by the airflow.
At an airfoil’s rear, which narrow boundary is found?
A Leading edge
B Wing root
C Tip fence
D Trailing edge
Answer: D. Trailing edge. The trailing edge is where the upper and lower surfaces meet aft.
Angle of attack is measured between the chord and what?
A Wing span
B Flight path
C Relative wind
D Vertical axis
Answer: C. Relative wind. Angle of attack uses the chord line and the local relative wind.
Flight direction and relative wind point in which directions?
A Opposite directions
B Same direction
C At right angles
D Vertically upward
Answer: A. Opposite directions. Relative wind is the airflow direction opposite the aircraft’s motion through air.
Perpendicular to relative wind, which force acts?
A Drag
B Lift
C Thrust
D Weight
Answer: B. Lift. Lift is the aerodynamic force component normal to relative wind.
Drag is parallel to airflow but points which way?
A With airflow
B Toward the wingtip
C Toward the ground
D Against airflow
Answer: D. Against airflow. Drag acts opposite the relative airflow direction.
In lift notation, what does CL denote?
A Drag coefficient
B Mach number
C Aspect ratio
D Lift coefficient
Answer: D. Lift coefficient. CL is the dimensionless coefficient used in the lift equation.
Which coefficient appears in D = qSCD?
A Lift coefficient
B Pressure ratio
C Drag coefficient
D Reynolds number
Answer: C. Drag coefficient. CD is the drag coefficient in the standard drag equation.
What units do aerodynamic force coefficients have?
A Newtons
B Pascals
C None; dimensionless
D Metres per second
Answer: C. None; dimensionless. Lift and drag coefficients are dimensionless ratios.
Which wing area is normally used in the lift equation?
A Wetted area
B Planform area
C Frontal area
D Fuselage area
Answer: B. Planform area. The conventional wing lift equation uses wing planform area.
How is finite-wing aspect ratio defined?
A Span squared over area
B Area over span
C Chord over span
D Span times area
Answer: A. Span squared over area. Aspect ratio is wing span squared divided by planform area.
For a finite wing, drag associated with producing lift is called what?
A Skin-friction drag
B Induced drag
C Wave drag
D Base drag
Answer: B. Induced drag. A finite lifting wing creates induced drag through its three-dimensional flow.
Pressure equalization around wing tips helps form what?
A Wingtip vortices
B Expansion fans
C Bow shocks
D Leading-edge bubbles
Answer: A. Wingtip vortices. Pressure differences around the tips roll into trailing vortices.
At comparable lift, a higher-aspect-ratio wing generally has what induced drag?
A More induced drag
B Less induced drag
C No profile drag
D Unchanged wave drag
Answer: B. Less induced drag. Higher aspect ratio lowers induced drag when other conditions are comparable.
Reynolds number compares which effects?
A Inertia and viscosity
B Lift and weight
C Pressure and temperature
D Thrust and drag
Answer: A. Inertia and viscosity. Reynolds number is the ratio of inertial to viscous effects.
Flight Mach number divides speed by what?
A Wing chord
B Local sound speed
C Air density
D Dynamic pressure
Answer: B. Local sound speed. Mach number is flight speed divided by the local speed of sound.
What is the thin flow region next to a wing surface?
A Boundary layer
B Stagnation region
C Mach cone
D Wake core
Answer: A. Boundary layer. Viscous effects are concentrated in the boundary layer near a surface.
Orderly, layered near-wall motion is called what?
A Turbulent flow
B Laminar flow
C Detached flow
D Choked flow
Answer: B. Laminar flow. Laminar boundary-layer flow has orderly layers with limited mixing.
Unsteady swirling motion near a wing surface is called what?
A Laminar flow
B Potential flow
C Turbulent flow
D Irrotational flow
Answer: C. Turbulent flow. Turbulent flow contains irregular fluctuations and eddies.
In straight, level, steady flight, lift balances which force?
A Thrust
B Drag
C Aircraft weight
D Centrifugal force
Answer: C. Aircraft weight. Vertical force balance in steady level flight requires lift to equal weight.
Which equation gives drag from q, S, and CD?
A D = qSCD
B L = qSCL
C q = ρVS
D CD = qDS
Answer: A. D = qSCD. Drag equals dynamic pressure times reference area times drag coefficient.