For a 10-second deep-water wave, phase speed is about what?
A 1.56 metres per second
B 31 metres per second
C 15.6 metres per second
D 156 metres per second
Answer: C. 15.6 metres per second. Deep-water phase speed is gT/(2π), giving about 15.6 metres per second.
An 8-second deep-water wave has wavelength near what?
A 100 metres
B 10 metres
C 50 metres
D 400 metres
Answer: A. 100 metres. Deep-water wavelength is gT²/(2π), close to 100 metres for an eight-second period.
If deep-water wave period doubles, wavelength changes how?
A It doubles
B It becomes fourfold
C It halves
D It stays constant
Answer: B. It becomes fourfold. Deep-water wavelength scales with the square of the wave period.
What does the zeroth wave-spectrum moment represent?
A Surface-elevation variance
B Mean wave direction
C Maximum water depth
D Tidal-range variance
Answer: A. Surface-elevation variance. The zeroth spectral moment m0 equals variance of surface elevation.
What are typical units for frequency spectrum S(f)?
A Metres per second
B Hertz per metre
C Square metres per hertz
D Square seconds per metre
Answer: C. Square metres per hertz. A frequency spectrum has units of surface-elevation variance per unit frequency.
How is spectral significant height Hm0 estimated?
A Four times square-root m0
B Twice spectral variance
C Square of mean period
D Half the peak frequency
Answer: A. Four times square-root m0. The spectral estimate Hm0 is four times the square root of m0.
If m0 is 0.25 square metres, Hm0 is what?
A 1 metre
B 2 metres
C 4 metres
D 0.5 metre
Answer: B. 2 metres. Four times √0.25 equals two metres.
If Hm0 is 3 metres, m0 is about what?
A 0.25 square metres
B 1.5 square metres
C 0.5625 square metres
D 9 square metres
Answer: C. 0.5625 square metres. Rearranging Hm0=4√m0 gives m0=(3/4)², or 0.5625 square metres.
What does integrating S(f) across frequency produce?
A Surface-elevation variance
B Peak direction
C Wave crest speed
D Tidal phase
Answer: A. Surface-elevation variance. The frequency integral of the variance spectrum is the zeroth moment m0.
How can a discrete spectrum estimate m0?
A Average directions only
B Multiply peak by depth
C Subtract high from low
D Sum S times bin width
Answer: D. Sum S times bin width. A discrete spectral integral sums each spectral density times its frequency-bin width.
What is wave action density in linear theory?
A Height times wavelength
B Energy divided by intrinsic frequency
C Frequency divided by energy
D Depth times group speed
Answer: B. Energy divided by intrinsic frequency. Wave action density is energy density divided by intrinsic angular frequency.
How does a steady current shift observed wave frequency?
A By surface tension
B By tidal datum
C By a Doppler shift
D By salinity change
Answer: C. By a Doppler shift. A current changes observed frequency through the Doppler relation between intrinsic and absolute frequency.
Which relation describes refraction over parallel contours?
A height/depth stays constant
B sin(angle)/speed constant
C period/fetch stays constant
D Salinity times wavelength stays constant
Answer: B. sin(angle)/speed constant. Snell’s law preserves sin(angle)/phase speed across parallel depth contours.
A ray enters slower water at 30° to normal. If speed halves, new angle is near what?
A 14.5 degrees
B 30 degrees
C 45 degrees
D 60 degrees
Answer: A. 14.5 degrees. Snell’s law gives sinθ₂=(1/2)sin30°=0.25, so θ₂ is about 14.5 degrees.
For regular waves, what does linear energy density scale with?
A Wave-height alone
B Wave-period squared
C Seafloor slope
D Wave-height squared
Answer: D. Wave-height squared. Linear wave energy density is proportional to the square of wave height.
If group speed falls to one-quarter, conserved flux makes height do what?
A Halve
B Quadruple
C Double
D Stay equal
Answer: C. Double. With energy flux conserved and energy proportional to height squared, quarter group speed doubles wave height.
What is the wave-blocking condition in an opposing current?
A Wind equals wave height
B Tide matches wave period
C Current becomes zero
D Current cancels group propagation
Answer: D. Current cancels group propagation. Blocking occurs when an adverse current cancels the wave’s group propagation relative to shore.
What does Stokes drift describe?
A Oscillation with zero drift
B Seafloor sediment settling
C Net drift along propagation
D Tidal reversal at shore
Answer: C. Net drift along propagation. Progressive surface waves can produce a net Lagrangian drift in their direction of travel.
Which balance helps an internal solitary wave keep its shape?
A Salinity and evaporation
B Tides and moonlight
C Pressure and density alone
D Nonlinearity and dispersion
Answer: D. Nonlinearity and dispersion. Solitary-wave shape can persist when nonlinear effects balance dispersive spreading.
Why can wave action be preferable to energy in currents?
A It removes all dissipation
B Energy frequency changes with motion
C It equals wave height
D It ignores currents
Answer: B. Energy frequency changes with motion. In a moving medium, intrinsic frequency changes, so wave action is the useful conserved quantity under slow changes.
In a stationary medium, which frequency is conserved across depth changes?
A Intrinsic frequency only
B Peak direction
C Wave height
D Absolute frequency
Answer: D. Absolute frequency. Time-invariant bathymetry conserves absolute frequency as waves shoal.
If frequency bins are twice as wide, what is needed for the same variance?
A Half the spectral density
B Double the spectral density
C Fourfold wave height
D Zero spectral energy
Answer: A. Half the spectral density. The spectral integral multiplies density by bin width, so doubling width halves density for equal variance.
A broad wave spectrum mainly reflects what?
A One pure frequency
B No measurable waves
C A fixed tidal cycle
D Energy across many frequencies
Answer: D. Energy across many frequencies. A broad spectrum distributes substantial energy over a range of frequencies.
How does nonlinearity alter a steep surface wave profile?
A Crests sharpen and troughs flatten
B Crests flatten and troughs sharpen
C Both become perfectly sinusoidal
D The wavelength disappears
Answer: A. Crests sharpen and troughs flatten. Finite-amplitude Stokes waves develop sharper crests and flatter troughs than a sinusoid.
What is a key trait of a solitary internal wave?
A A regular surface ripple
B A localized coherent pulse
C A permanent ocean current
D A standing tidal bulge
Answer: B. A localized coherent pulse. An internal solitary wave is a localized nonlinear pulse that propagates coherently.