Difficulty: Easy & Basic
What does significant wave height represent?
A Largest wave observed
B Mean of lowest third
C Average tidal range
D Mean of highest third
Answer: D. Mean of highest third. Significant wave height is the average of the highest one-third of waves.
Why can an individual wave exceed significant height?
A It excludes large waves
B It measures only swells
C It is a subset average
D It is a fixed limit
Answer: C. It is a subset average. Significant height summarizes a group and is not the maximum individual wave.
What does a buoy heave record measure?
A Vertical surface motion
B Water salinity
C Seafloor slope
D Wind direction
Answer: A. Vertical surface motion. Heave is the buoyβs vertical motion as the surface rises and falls.
What does wave frequency count?
A Distance between crests
B Height above mean sea
C Cycles passing each second
D Time for one tide
Answer: C. Cycles passing each second. Frequency is the number of repeated cycles per second.
A wave period is eight seconds. What is its frequency?
A 0.8 hertz
B 0.125 hertz
C 8 hertz
D 16 hertz
Answer: B. 0.125 hertz. Frequency is the reciprocal of period, so 1/8 equals 0.125 hertz.
What is a spectral peak period?
A Shortest period measured
B Mean tidal period
C Time between storm fronts
D Period at the energy peak
Answer: D. Period at the energy peak. Peak period corresponds to the frequency where the wave spectrum has its greatest energy.
What does a wave frequency spectrum display?
A Energy across frequencies
B Depth across coastlines
C Salinity across currents
D Tides across months
Answer: A. Energy across frequencies. A frequency spectrum distributes wave energy across different frequencies.
What extra information does a directional spectrum include?
A Seafloor age
B Tidal datum
C Water chemistry
D Wave energy direction
Answer: D. Wave energy direction. A directional spectrum resolves how wave energy is distributed by direction as well as frequency.
Two separated spectral peaks often indicate what?
A Two water masses
B Two tidal stations
C Distinct wave systems
D One uniform swell
Answer: C. Distinct wave systems. Separate peaks can represent different systems such as wind sea and swell.
What interval defines a zero-upcrossing wave period?
A Between two wave troughs
B Across one tidal cycle
C From crest to trough
D Between upward mean crossings
Answer: D. Between upward mean crossings. A zero-upcrossing period spans consecutive upward crossings of the mean water level.
How is an individual surface wave height measured?
A Crest to trough
B Crest to crest
C Shore to crest
D Trough to seafloor
Answer: A. Crest to trough. Wave height is the vertical distance between a crest and its neighboring trough.
What distance is one wavelength for regular waves?
A Crest-to-trough height
B Adjacent crest spacing
C Time between crests
D Distance to shoreline
Answer: B. Adjacent crest spacing. Wavelength is the spacing between adjacent points in the same phase, such as crests.
For a symmetric wave, what is amplitude?
A Half the wave height
B Twice the wave height
C Full wavelength
D Full wave period
Answer: A. Half the wave height. Amplitude is half the crest-to-trough height for a symmetric wave.
Which ratio describes wave steepness?
A Length divided by period
B Depth divided by height
C Frequency divided by length
D Height divided by length
Answer: D. Height divided by length. Wave steepness is the ratio of wave height to wavelength.
At fixed wavelength, what makes a wave steeper?
A Lower wave height
B Longer period only
C Greater wave height
D Deeper water only
Answer: C. Greater wave height. Steepness rises when height increases while wavelength stays fixed.
In linear theory, how does wave energy vary with height?
A With height squared
B With height alone
C With height cubed
D Independent of height
Answer: A. With height squared. Linear wave energy density is proportional to the square of wave height.
What determines wave-energy flux per crest width?
A Salinity and tidal range
B Energy density and group speed
C Wind direction and depth
D Wavelength and moon phase
Answer: B. Energy density and group speed. Wave-energy flux per unit crest width depends on energy density and group velocity.
In deep water, group speed is about what fraction of phase speed?
A Equal
B One quarter
C One half
D Twice
Answer: C. One half. For deep-water gravity waves, group velocity is half the phase velocity.
What travels at phase velocity?
A Individual wave crests
B Wave energy packet
C Tidal bulges
D Water mass only
Answer: A. Individual wave crests. Phase velocity describes the motion of a particular phase, such as a crest.
In deep water, which gravity waves travel faster?
A Shorter wavelength waves
B Longer wavelength waves
C All travel equally
D Only capillary ripples
Answer: B. Longer wavelength waves. Deep-water gravity waves with longer wavelengths generally travel faster.
Which wave signal fades faster with depth?
A Longer wavelength signal
B Tidal mean level
C Salinity variation
D Shorter wavelength signal
Answer: D. Shorter wavelength signal. Wave-induced pressure fluctuations attenuate more rapidly with depth for shorter wavelengths.
What can an opposing current do to waves?
A Lengthen and flatten them
B Shorten and steepen them
C Stop all tides
D Raise ocean salinity
Answer: B. Shorten and steepen them. An opposing current can shorten waves and increase their steepness.
What happens to wave energy when a breaker forms?
A Energy is dissipated
B Energy becomes salinity
C Energy stops moving
D Energy turns into tide
Answer: A. Energy is dissipated. Breaking dissipates organized wave energy through turbulence and turbulence-related processes.
What does directional spreading describe?
A Change in sea depth
B Energy across wave headings
C Variation in tidal height
D Spread of water salinity
Answer: B. Energy across wave headings. Directional spreading describes how wave energy is distributed around a mean direction.
What can a broad spectral peak indicate?
A One exact wave period
B No wave energy
C A wide frequency range
D Only tidal motion
Answer: C. A wide frequency range. A broad peak means substantial energy is spread across a wider range of frequencies.