A municipal water-supply system begins with which step?
A Sludge digestion
B Pavement design
C Traffic assignment
D Source selection
Answer: D. Source selection. Planning identifies a suitable source before collection, treatment and distribution.
Which is a common surface-water source?
A Deep confined aquifer
B Treated effluent tank
C River
D Rain gauge
Answer: C. River. Rivers are surface-water sources that may require treatment before supply.
An intake structure draws water from what?
A A sewer manhole
B A sludge bed
C A pavement drain
D A source body
Answer: D. A source body. Intakes collect raw water from a river, lake or reservoir.
Screens at a water-treatment plant remove what?
A Dissolved salts
B Coarse floating debris
C Fine viruses
D Water hardness
Answer: B. Coarse floating debris. Screens intercept leaves, sticks and other large debris.
Coagulation destabilizes which particles?
A Large gravel
B Dissolved oxygen
C Pipe scale only
D Fine colloids
Answer: D. Fine colloids. Coagulants neutralize or destabilize colloidal particles so they can aggregate.
Flocculation gently promotes formation of what?
A Larger flocs
B Dissolved salts
C Free chlorine
D Air bubbles only
Answer: A. Larger flocs. Slow mixing brings destabilized particles together into larger settleable flocs.
A sedimentation basin removes solids mainly by what?
A Ultraviolet exposure
B Gravity settling
C Membrane osmosis
D Chlorine oxidation
Answer: B. Gravity settling. Settling allows suspended particles to separate under gravity.
Filtration in drinking-water treatment removes what?
A All dissolved salts
B All hardness ions
C Remaining suspended particles
D All oxygen
Answer: C. Remaining suspended particles. Filters capture particles that remain after clarification.
Disinfection is intended to inactivate what?
A Disease-causing organisms
B Hardness minerals
C Sand grains
D Dissolved oxygen
Answer: A. Disease-causing organisms. Disinfection reduces or inactivates pathogens in treated water.
Chlorine residual is maintained mainly to provide what?
A Higher turbidity
B Protection in distribution
C More hardness
D Sludge settling
Answer: B. Protection in distribution. A disinfectant residual helps protect water as it travels through the distribution system.
Water turbidity is an optical indication of what?
A Dissolved oxygen only
B Pipe pressure
C Water temperature only
D Suspended particles
Answer: D. Suspended particles. Turbidity results from light scattering by suspended or colloidal matter.
Water hardness is mainly caused by which ions?
A Calcium and magnesium
B Sodium and chloride
C Iron and oxygen
D Nitrate and fluoride
Answer: A. Calcium and magnesium. Dissolved calcium and magnesium are the principal contributors to hardness.
A pH near 7 at room temperature is described as what?
A Neutral
B Strongly acidic
C Strongly alkaline
D Saline
Answer: A. Neutral. At about 25 degrees Celsius, pH 7 is neutral on the conventional scale.
A distribution network conveys treated water to whom?
A Only treatment operators
B Only sludge beds
C Only intake screens
D Consumers
Answer: D. Consumers. Distribution pipes deliver treated water to service connections and users.
A service reservoir helps balance what?
A Water hardness
B Sludge age
C Supply and demand
D Pavement traffic
Answer: C. Supply and demand. Storage balances variable production and consumption and can support pressure and emergencies.
BOD is an estimate of oxygen used by what?
A Dissolved salts
B Biodegradable matter
C Sand particles
D Chlorine residual
Answer: B. Biodegradable matter. Biochemical oxygen demand indicates oxygen consumed by microorganisms while degrading biodegradable material.
Dissolved oxygen in receiving water is often abbreviated how?
A BOD
B DO
C COD
D TSS
Answer: B. DO. DO means dissolved oxygen, a key water-quality parameter for aquatic life and treatment.
Wastewater from homes and businesses is also called what?
A Raw groundwater
B Backwash only
C Sewage
D Rainfall intensity
Answer: C. Sewage. Sewage is wastewater collected from domestic or commercial sources.
A primary clarifier removes mainly what from wastewater?
A Settleable solids
B Dissolved nitrate only
C All viruses
D Dissolved oxygen
Answer: A. Settleable solids. Primary sedimentation removes settleable and floatable material before biological treatment.
A drinking-water treatment train commonly ends with what?
A Disinfection
B Coarse screening
C Raw-water intake
D Grit removal
Answer: A. Disinfection. After clarification and filtration, disinfection provides a final pathogen barrier.
A water-treatment jar test helps choose what?
A Pipe diameter
B Sewer slope
C Coagulant dose
D Pump bearing type
Answer: C. Coagulant dose. Jar tests compare coagulant doses and mixing conditions using small batch samples.
A clear well commonly stores water after what?
A Raw screening
B Sludge thickening
C Filtration and disinfection
D Sewer grit removal
Answer: C. Filtration and disinfection. A clear well holds treated water before pumping or distribution.
A sanitary sewer carries what?
A Only drinking water
B Only storm runoff
C Only groundwater recharge
D Wastewater
Answer: D. Wastewater. Sanitary sewers collect domestic and similar wastewater for treatment.
A storm sewer is designed primarily for what?
A Rainfall runoff
B Domestic sewage
C Sludge return
D Drinking-water storage
Answer: A. Rainfall runoff. Storm sewers convey runoff from rainfall and drainage areas.
Treated wastewater reuse can reduce demand on what?
A Sewer capacity only
B Freshwater sources
C Sludge treatment
D Roadside drains
Answer: B. Freshwater sources. Appropriate reuse can substitute treated effluent for some freshwater uses.