Transportation Engineering MCQs (Set-3)

Greenshields’ model assumes a linear relation between speed and what?

A Road curvature
B Traffic density
C Trip length
D Signal delay

In a simple speed-density model, speed approaches zero at what condition?

A Zero density
B Jam density
C Free-flow speed
D Capacity flow

Free-flow speed occurs in Greenshields’ model at what density?

A Jam density
B Critical density
C Capacity density
D Zero density

For Greenshields flow, critical density is what fraction of jam density?

A One-half
B One-quarter
C Three-quarters
D Equal to jam density

Greenshields maximum flow equals free-flow speed times jam density divided by what?

A Two
B Three
C Four
D Eight

For equal travel distances, the appropriate average speed is which?

A Time-mean speed
B Space-mean speed
C Peak-hour speed
D Design speed

If density is 20 vehicles/km and speed is 45 km/h, flow is what?

A 900 vehicles/hour
B 225 vehicles/hour
C 65 vehicles/hour
D 1800 vehicles/hour

A flow of 900 vehicles/hour has an average time headway of about what?

A 4 seconds
B 2 seconds
C 6 seconds
D 10 seconds

Capacity expressed in PCU/hour represents what?

A Equivalent vehicle throughput
B Road length per hour
C Passenger distance only
D Parking turnover

A saturation headway of 2 seconds corresponds to what flow?

A 900 vehicles/hour
B 1800 vehicles/hour
C 1200 vehicles/hour
D 3600 vehicles/hour

When demand exceeds capacity, the V/C ratio is what?

A Greater than one
B Equal to zero
C Less than one
D Exactly one-half

LOS A generally represents which traffic condition?

A Forced-flow breakdown
B Stop-and-go queueing
C Complete closure
D Free-flow operation

Webster’s approximate cycle formula uses total lost time and what?

A Road surface temperature
B Vehicle length
C Parking duration
D Critical flow ratios

At a signal, effective green is allocated mainly according to what?

A Paint color
B Roadside land price
C Critical movement demand
D Vehicle height

A roundabout can reduce severe crossing conflicts by doing what?

A Deflecting entering traffic
B Increasing approach speed
C Adding signal phases
D Removing yield control

The gravity model’s impedance term represents what?

A Vehicle engine size
B Roadside building height
C Pavement color
D Travel separation or cost

User-equilibrium assignment assumes used routes have what for a given O-D pair?

A Equal road length
B Equal minimum travel cost
C Zero congestion
D Identical capacity

All-or-nothing assignment ignores which feedback?

A Trip origins
B Congestion on assigned links
C Network connectivity
D Route choice

A multimodal network model should represent transfers between what?

A Only road lanes
B Only adjacent zones
C Different transport modes
D Only parking stalls

Travel demand management seeks to influence when, where or how people what?

A Build foundations
B Treat water
C Travel
D Design concrete

Induced demand describes added travel after what?

A Road closure
B Fare increase only
C Parking removal
D Capacity expansion

A transport externality is a cost imposed on whom?

A Only the vehicle owner
B Only the road builder
C Others outside the trip
D Only the driver’s employer

A transport terminal mainly enables what?

A Passenger or freight transfers
B Soil compaction
C Signal timing only
D Pavement testing

Passenger-kilometres measure passengers multiplied by what?

A Vehicle capacity
B Trip frequency only
C Distance travelled
D Road width

Vehicle-kilometres measure vehicles multiplied by what?

A Passenger weight
B Signal delay
C Parking spaces
D Distance travelled