Transportation engineering primarily studies movement of what?
A People and goods
B Water molecules only
C Building loads
D Power signals
Answer: A. People and goods. It plans and operates systems that move people and freight safely and efficiently.
Which is a major transport mode?
A Railway
B Concrete batching
C Soil testing
D Water treatment
Answer: A. Railway. Rail is one of the principal passenger and freight transport modes.
Transport planning seeks to match travel demand with what?
A Foundation depth
B Facilities and services
C Concrete grade
D Roof drainage
Answer: B. Facilities and services. Planning forecasts needs and evaluates networks, services and policies to meet travel demand.
Which is the usual first step in the four-step model?
A Traffic assignment
B Trip generation
C Modal split
D Trip distribution
Answer: B. Trip generation. The conventional sequence begins by estimating trip productions and attractions.
Trip generation estimates the number of what?
A Lanes per road
B Signal conflicts
C Vehicles per parking stall
D Trips produced and attracted
Answer: D. Trips produced and attracted. Trip generation predicts how many trips begin or end in each zone.
Trip distribution connects trip origins with what?
A Traffic signs
B Road shoulders
C Signal phases
D Destinations
Answer: D. Destinations. Trip distribution estimates the origin-destination pattern of travel.
Modal split predicts a traveler’s choice of what?
A Travel destination
B Transport mode
C Road alignment
D Parking duration
Answer: B. Transport mode. Mode choice allocates trips among car, transit, walking, cycling and other modes.
Traffic assignment places trips onto what?
A Land-use zones only
B Parking stalls
C Network routes
D Bus timetables
Answer: C. Network routes. Assignment estimates route use and traffic on network links.
An origin-destination matrix summarizes trips between what?
A Road signs
B Signal poles
C Traffic zones
D Vehicle classes
Answer: C. Traffic zones. An O-D matrix records trip movements from each origin zone to each destination zone.
Passenger car unit converts vehicle effects to what common basis?
A Truck axle loads
B Passenger cars
C Bus passengers
D Road lengths
Answer: B. Passenger cars. PCU expresses mixed traffic impact relative to a passenger car under stated conditions.
Traffic volume is a count of vehicles over what?
A A road width
B A pavement depth
C A time interval
D A trip length
Answer: C. A time interval. Volume is the number of vehicles passing a point or section during a specified period.
A peak-hour factor compares hourly volume with what?
A Daily traffic only
B Annual growth rate
C Average vehicle length
D Peak 15-minute flow rate
Answer: D. Peak 15-minute flow rate. PHF measures how evenly traffic is distributed within the peak hour.
A spot-speed study measures vehicle speed at what?
A An entire journey
B A parking garage
C A fixed location
D A destination zone
Answer: C. A fixed location. Spot speed is measured at a specific point on the road.
Journey speed includes which time component?
A Running time only
B Parking search only
C Stops and delays
D Signal cycle only
Answer: C. Stops and delays. Journey speed uses total trip time, including stops and delays.
Traffic density is usually expressed as vehicles per what?
A Unit road length
B Unit time
C Unit pavement area
D Unit vehicle mass
Answer: A. Unit road length. Density is the number of vehicles occupying a unit length of roadway.
Time headway is measured between vehicles passing the same what?
A Reference point
B Destination zone
C Parking bay
D Signal cycle
Answer: A. Reference point. Headway is the time gap between successive vehicles at a point.
Space headway is the distance between successive what?
A Traffic signals
B Road intersections
C Bus routes
D Vehicles in a stream
Answer: D. Vehicles in a stream. Space headway measures longitudinal spacing between vehicles.
A road hierarchy balances mobility with what?
A Concrete strength
B Water supply
C Rail gauge
D Property access
Answer: D. Property access. Road classification often trades through movement against direct access to adjacent land.
The volume-capacity ratio compares demand with what?
A Road length
B Available capacity
C Vehicle height
D Signal color
Answer: B. Available capacity. V/C relates traffic demand to the capacity of a facility.
Public transport capacity is often measured in what?
A Road signs per kilometre
B Cars per parking bay
C Passengers per hour
D Lanes per junction
Answer: C. Passengers per hour. Transit capacity commonly counts passengers carried per hour in a direction.
Land-use planning can change travel demand by changing what?
A Activity locations
B Vehicle tire size
C Signal lamp color
D Road surface texture
Answer: A. Activity locations. Where homes, jobs and services are located affects trip lengths and mode choices.
A cordon count measures traffic crossing what?
A A defined boundary
B One parking aisle
C A bus stop only
D A single signal phase
Answer: A. A defined boundary. Cordon surveys count trips entering or leaving a bounded study area.
A desire-line diagram displays trips between what?
A Origins and destinations
B Speeds and gradients
C Pavement layers
D Signal groups
Answer: A. Origins and destinations. Desire lines visualize the magnitude and direction of O-D movements.
Multimodal integration connects modes through what?
A Separate ticket rules only
B Longer transfer walks
C Unlinked schedules
D Coordinated transfers
Answer: D. Coordinated transfers. Integrated networks coordinate physical connections, information, fares or schedules between modes.
A complete street design considers which users?
A Only private cars
B All road users
C Only freight trucks
D Only buses
Answer: B. All road users. Complete streets account for pedestrians, cyclists, transit users and motorists.