Trip attraction is commonly related to which land-use measure?
A Road paint color
B Jobs and activities
C Bridge bearing type
D Soil density
Answer: B. Jobs and activities. Employment, retail and other activities attract trips to a zone.
A gravity model generally predicts more trips between zones with what?
A Greater separation only
B Fewer activities
C No network connection
D Larger trip ends
Answer: D. Larger trip ends. Gravity models use trip productions and attractions, moderated by separation or travel cost.
A growth-factor method forecasts future trips using what?
A Only road width
B Signal phasing
C Observed base trips
D Pavement thickness
Answer: C. Observed base trips. Growth-factor methods apply estimated factors to a known base-year travel pattern.
A roadside interview survey collects what information?
A Concrete compressive strength
B Pipe pressure
C Soil plasticity
D Trip origin and destination
Answer: D. Trip origin and destination. Roadside interviews ask selected travelers about trip characteristics and travel patterns.
Parking accumulation is the number of parked vehicles at what?
A Each road kilometre
B A particular time
C A whole year only
D Each signal cycle
Answer: B. A particular time. Accumulation is the number of vehicles parked in an area at a given instant.
Parking duration is the time a vehicle occupies what?
A A road lane
B A signal phase
C A bus route
D A parking space
Answer: D. A parking space. Duration is the length of time a vehicle stays parked.
Parking turnover measures vehicles served per what?
A Road kilometre
B Space over time
C Signal approach
D Travel zone
Answer: B. Space over time. Turnover describes how many vehicles use a parking space during a period.
A radar gun is commonly used for which traffic survey?
A O-D desire lines
B Parking occupancy
C Spot speed
D Vehicle emissions
Answer: C. Spot speed. Radar speed meters measure the speed of passing vehicles at a point.
Time-mean speed is the arithmetic mean of what?
A Travel times
B Headways
C Vehicle lengths
D Spot speeds
Answer: D. Spot speeds. Time-mean speed averages individual vehicle speeds observed at a point.
Space-mean speed is commonly the harmonic mean of what?
A Spot speeds
B Traffic volumes
C Road widths
D Signal cycles
Answer: A. Spot speeds. For a road segment, space-mean speed is the harmonic mean of vehicle speeds over equal distances.
A queue forms when arrivals temporarily exceed what?
A Road length
B Parking duration
C Service rate
D Trip attraction
Answer: C. Service rate. If arrivals exceed the discharge or service rate, vehicles accumulate in a queue.
Traffic signal cycle length is total time for what?
A One vehicle pass
B A full trip
C All signal phases
D A parking search
Answer: C. All signal phases. A cycle is the time for a signal sequence to complete and repeat.
Saturation flow is the maximum steady discharge under what?
A Red indication
B Continuous green
C No approach demand
D Blocked downstream lane
Answer: B. Continuous green. Saturation flow represents queued vehicles discharging under continuous effective green.
Degree of saturation at a signal is often expressed as what?
A Capacity divided by length
B Flow divided by capacity
C Speed times density
D Delay divided by volume
Answer: B. Flow divided by capacity. The v/c ratio indicates demand relative to approach or lane-group capacity.
Level of service describes which aspect of operation?
A Quality for users
B Concrete strength
C Annual rainfall
D Bridge fatigue life
Answer: A. Quality for users. LOS grades operating conditions such as speed, delay, freedom to maneuver and comfort.
All-or-nothing assignment sends each O-D pair to what?
A One minimum-cost path
B Every possible path equally
C Only the shortest link
D The nearest parking bay
Answer: A. One minimum-cost path. The method assigns all demand to a single least-cost route under its assumed costs.
Road signs are commonly grouped as regulatory, warning and what?
A Informatory
B Structural
C Hydrologic
D Geotechnical
Answer: A. Informatory. These are the familiar functional groups of traffic signs.
Road markings can guide, warn and what?
A Increase pavement thickness
B Change vehicle engines
C Measure rainfall
D Regulate traffic
Answer: D. Regulate traffic. Markings channel traffic and communicate rules or guidance to road users.
On-street parking occupies space within what?
A A transit terminal only
B A private garage only
C A roadside drain
D Road right-of-way
Answer: D. Road right-of-way. On-street parking uses designated spaces along the public roadway.
Traffic calming aims to reduce vehicle speed and what?
A Pedestrian access
B Street visibility
C Through traffic
D Public transport use
Answer: C. Through traffic. Traffic-calming measures support safer speeds and often discourage cut-through traffic.
A black spot is a site with what history?
A High parking turnover
B Repeated severe crashes
C Low pavement roughness
D Frequent bus service
Answer: B. Repeated severe crashes. Crash-prone locations are identified for safety investigation and countermeasures.
An intelligent transportation system uses what to improve operations?
A Data and communications
B Only wider shoulders
C Only larger vehicles
D Only manual tolls
Answer: A. Data and communications. ITS uses sensing, communications and control to support transport operations and information.
A pedestrian refuge island mainly provides what?
A Staged crossing space
B A vehicle passing lane
C A bus layover bay
D A drainage outlet
Answer: A. Staged crossing space. A refuge lets pedestrians cross a wide road in two stages.
A transit headway is the time between successive what?
A Vehicles on a route
B Stops on a map
C Signal cycles
D Parking events
Answer: A. Vehicles on a route. Transit headway is the interval between consecutive vehicles in the same direction.
An interchange connects which facilities?
A Only adjoining buildings
B Two pavement layers
C Different transport routes
D Signal controllers only
Answer: C. Different transport routes. An interchange provides grade-separated or organized connections between routes.