In a recirculating-ball steering box, what circulates through the nut and worm grooves?
A Coolant droplets
B Fuel pellets
C Ball bearings
D Brake shoes
Answer: C. Ball bearings. Recirculating balls reduce friction between the worm and ball nut.
What does a steering-angle sensor report?
A Fuel pressure
B Steering wheel angle
C Coolant temperature
D Engine knock
Answer: B. Steering wheel angle. The sensor reports steering-angle position to vehicle control systems.
Which controller commands assist in electric power steering?
A Fuel injector driver
B EPS control unit
C Radiator relay
D Brake proportioning valve
Answer: B. EPS control unit. The EPS controller uses sensor inputs to command motor assistance.
How does speed-sensitive steering assist usually change at highway speed?
A Assistance decreases
B Assistance increases greatly
C Steering locks
D Gear ratio doubles
Answer: A. Assistance decreases. Reduced assist at higher speed can improve steering feel and stability.
What may a steering-axis inclination angle help provide?
A Fuel atomization
B Gear lubrication
C Self-centering tendency
D Coolant circulation
Answer: C. Self-centering tendency. Steering-axis geometry contributes to returnability and steering behavior.
What is scrub radius measured between?
A Front and rear axles
B Wheel top and fender
C Steering wheel and column
D Axis-ground point to contact center
Answer: D. Steering-axis ground point and tire center. Scrub radius is the lateral distance between the steering-axis ground intersection and tire centerline.
What is caster trail?
A Axis-to-contact ground offset
B Wheelbase divided by track
C Tire width above rim
D Rack travel per turn
Answer: A. Ground distance from axis point to contact patch. Caster trail is the longitudinal distance between steering-axis ground point and tire contact center.
What does bump steer describe?
A Steering ratio at parking
B Caster change with engine speed
C Wheel torque during braking
D Toe change with suspension travel
Answer: D. Toe change with suspension travel. Bump steer is unintended steering-angle or toe change as suspension moves.
What is understeer in a corner?
A Rear tires lose grip first
B Front tires lose grip first
C All tires lock equally
D Steering wheel spins freely
Answer: B. Front tires lose grip first. Understeer means the vehicle turns less than commanded as front lateral grip saturates first.
What is oversteer in a corner?
A Front tires lose grip first
B Both axles stay aligned
C Rear tires lose grip first
D Steering gear locks
Answer: C. Rear tires lose grip first. Oversteer occurs when rear lateral grip is lost before the front.
What can a worn steering rack bush cause?
A Higher fuel octane
B Coolant foaming
C Clutch slip
D Knock or excess movement
Answer: D. Knock or excess movement. Worn rack supports can allow movement and create knocking.
Why are rack bellows fitted?
A Increase steering ratio
B Store power-steering fluid
C Cool the tie rods
D Keep dirt and water away
Answer: D. Keep dirt and water away. Bellows protect the rack and inner joints from contamination.
What does a hydraulic steering relief valve limit?
A Steering wheel diameter
B Rack travel length
C Maximum system pressure
D Tire camber
Answer: C. Maximum system pressure. The relief valve limits pressure to protect the hydraulic circuit.
Air in hydraulic steering fluid may cause what?
A Higher tire pressure
B Lower engine speed
C Fuel vapor lock
D Foam and pump noise
Answer: D. Foam and pump noise. Air can aerate fluid, causing foaming, noise, or inconsistent assistance.
What may a hydraulic steering leak lead to?
A Higher engine compression
B Falling fluid and heavy steering
C Reduced wheelbase
D Increased fuel octane
Answer: B. Falling fluid and heavy steering. Fluid loss reduces hydraulic assistance and can damage the pump.
What symptom can a loose steering ball joint create?
A Higher coolant pressure
B Gearbox whine
C Play and clunking
D Fuel starvation
Answer: C. Play and clunking. A worn joint can create looseness, noise, or imprecise steering.
What does excessive steering-gear lash feel like?
A Heavy clutch pedal
B Free play at steering wheel
C Low radiator level
D Fuel pump surge
Answer: B. Free play at steering wheel. Excess clearance can create noticeable steering-wheel free play.
What can excessive hydraulic pump cavitation produce?
A Whine and bubbles
B More caster trail
C Lower steering ratio
D Higher tire grip
Answer: A. Whine and bubbles. Low inlet pressure or aerated fluid can cause pump cavitation and noise.
What is a common purpose of a steering damper?
A Increase engine torque
B Change gear ratio
C Reduce shimmy oscillations
D Cool the gearbox
Answer: C. Reduce shimmy oscillations. A steering damper resists rapid oscillation in some steering systems.
A variable-ratio rack changes what across its travel?
A Coolant flow rate
B Fuel pressure
C Wheelbase length
D Steering response ratio
Answer: D. Steering response ratio. Variable tooth spacing can alter steering ratio as the rack moves.
Which signal helps EPS estimate driver intent?
A Fuel-tank pressure
B Oil viscosity
C Steering torque input
D Radiator temperature only
Answer: C. Steering torque input. EPS typically uses torque sensing to determine driver steering effort.
What can a damaged intermediate shaft coupling cause?
A Knock or binding
B Higher fuel level
C Lower tire tread
D Coolant overflow
Answer: A. Knock or binding. A worn or seized coupling can create noise or restrict smooth steering motion.
Why is power-steering fluid foaming undesirable?
A It raises gear ratio
B It makes assist inconsistent
C It increases tire camber
D It locks the steering wheel
Answer: B. It makes assist inconsistent. Foam contains compressible air and can make hydraulic assist erratic.
What may a leaking rack seal cause?
A Fluid around rack boots
B Engine-oil pressure rise
C Higher exhaust temperature
D Coolant loss at radiator
Answer: A. Fluid around rack boots. A rack-seal leak may leave power-steering fluid inside or around the bellows.
Which inspection can reveal a bent steering linkage?
A Compare alignment and components
B Check fuel octane
C Measure radiator pressure
D Test clutch free play
Answer: A. Compare alignment and components. A bent rod can alter alignment and should be confirmed by inspection.