Power Plant Engineering MCQs (Set-2)

A gas-turbine power plant commonly follows which ideal cycle?

A Rankine cycle
B Otto cycle
C Stirling cycle
D Brayton cycle

The gas-turbine compressor raises air what?

A Humidity only
B Chemical energy
C Fuel octane
D Pressure

The combustor adds heat by burning fuel in what?

A Compressed air
B Condenser water
C Turbine oil
D Exhaust steam

The turbine in a gas-turbine plant produces what?

A Cooling water
B Shaft work
C Boiler feedwater
D Fuel vapor

An open-cycle gas turbine exhausts combustion products to what?

A Compressor inlet only
B Atmosphere
C Boiler drum
D Condenser shell

A combined-cycle plant couples a gas turbine with what?

A Steam bottoming cycle
B Diesel engine only
C Hydraulic turbine
D Battery bank

An HRSG uses gas-turbine exhaust to generate what?

A Steam
B Coal slurry
C Cooling water
D Compressed air

Compressor intercooling usually reduces what?

A Combustor temperature always
B Compression work
C Turbine pressure ratio
D Air mass flow to zero

A recuperator transfers turbine exhaust heat to what?

A Cooling water only
B Fuel tank
C Compressed air
D Steam condenser

A nuclear power plant releases energy through what process?

A Chemical oxidation
B Friction heating
C Nuclear fission
D Solar absorption

A reactor moderator slows down what?

A Neutrons
B Control rods
C Coolant pumps
D Fuel pellets

Control rods regulate a reactor by absorbing what?

A Steam bubbles
B Neutrons
C Cooling water
D Fuel heat

A reactor coolant carries heat away from what?

A Containment walls only
B Turbine blades
C Fuel and core
D Electrical busbars

A containment structure provides a barrier against what?

A Turbine overspeed only
B Fuel leaks into air
C Radioactive release
D Cooling tower drift only

A pressurized-water reactor keeps primary water what?

A At atmospheric pressure
B Fully frozen
C At vacuum
D Under high pressure

A boiling-water reactor produces steam where?

A In the reactor vessel
B In a separate boiler only
C In the cooling tower
D In the condenser

Uranium fuel undergoes what to release reactor heat?

A Fission
B Combustion
C Condensation
D Electrolysis

A diesel generator set is useful for what role?

A Base steam generation only
B Cooling tower drift
C Backup power
D Fuel refining

Cogeneration produces electricity and what useful output?

A Only exhaust noise
B Process heat
C Fuel ash
D Cooling water

Combined heat and power can improve what?

A Total fuel utilization
B Condenser pressure
C Turbine moisture
D Stack height only

A gas turbine has high what relative to plant size?

A Water consumption always
B Coal ash
C Condenser vacuum
D Specific power

Turbine isentropic efficiency compares actual work with what ideal work?

A Pump work
B Isentropic work
C Fuel heating value
D Electrical transformer loss

A nuclear steam generator separates primary coolant from what?

A Fuel rods
B Control rods
C Containment air
D Secondary steam cycle

A reactor shutdown rapidly inserts what?

A Fuel injectors
B Air dampers
C Control rods
D Condenser tubes

A plant transformer steps generator voltage for what?

A Boiler feedwater
B Fuel heating
C Condenser cooling
D Grid transmission