Metrology MCQs (Set-4)

A plug gauge checks dimensions of what feature?

A External shaft
B Flatness
C A hole
D Surface roughness only

A ring gauge checks size of what feature?

A Internal hole
B Thread lead only
C Surface flatness
D External shaft

A snap gauge is commonly used for what measurement?

A Internal gear teeth
B Surface temperature
C Hole depth only
D External dimensions

A GO/NO-GO gauge gives what type of decision?

A Continuous numeric reading
B Surface profile
C Pass or fail
D Material composition

The GO side of a limit gauge checks the what limit?

A Least material condition only
B Maximum material condition
C Mean size
D Surface roughness

Limit gauges are useful for high-volume what?

A Detailed contour tracing
B Temperature mapping
C Material analysis
D Rapid inspection

Thread pitch diameter can be measured by what method?

A Three-wire method
B Sine-bar method
C Wringing method
D Optical-flat method

A screw-thread micrometer has which special feature?

A Flat anvils only
B Optical lens
C V-shaped measuring faces
D Dial indicator plunger

Gear tooth vernier measures chordal thickness and what?

A Thread pitch
B Chordal addendum
C Shaft runout
D Surface waviness

Base-tangent gear measurement spans how many teeth?

A One tooth tip only
B Several adjacent teeth
C One shaft revolution
D One gear face width

A span measurement of gear teeth checks what?

A Shaft diameter
B Tooth thickness
C Gear bore depth
D Surface temperature

Gear runout indicates variation relative to what?

A Gear axis
B Tooth hardness
C Module only
D Pressure angle only

Thread lead is axial advance over what?

A One pitch diameter
B One thread flank
C One revolution
D One scale division

A stylus profilometer samples what along a surface?

A Height profile
B Material density
C Temperature
D Electrical conductivity

A roughness cutoff length separates roughness from what?

A Flatness
B Waviness
C Roundness
D Conicity

Roundness error is evaluated in a cross-section perpendicular to what?

A Axis
B Surface tangent
C Datum plane only
D Thread helix

Cylindricity is a combined control of roundness and what?

A Length
B Thread pitch
C Straightness
D Surface color

Concentricity compares centers or axes of what features?

A Related features
B Surface roughness values
C Temperature readings
D Gear speeds

Profile tolerance controls a surface relative to what?

A Machine speed
B Material hardness
C Pressure head
D True profile

Tolerance stack-up estimates how dimensions combine in what?

A Instrument drift
B Surface roughness
C Assembly variation
D Calibration interval

Interchangeability requires parts to assemble without what?

A Inspection
B Tolerance
C Manufacturing
D Selective fitting

Inspection determines conformance while calibration establishes what?

A Product demand
B Machine capacity
C Supplier rating
D Instrument measurement relation

Gauge R&R separates repeatability from what?

A Accuracy from precision
B Reproducibility
C Bias from drift
D Linearity from sensitivity

A limit gauge does not usually provide what?

A Exact measured value
B Pass-fail decision
C Tolerance check
D Rapid screening

A calibrated master is used to verify what?

A Working gauge
B Product demand
C Machine speed
D Surface treatment