An LVDT measures what quantity?
A Rotational torque
B Humidity
C Surface roughness
D Linear displacement
Answer: D. Linear displacement. An LVDT converts linear core movement into an electrical signal.
A bonded strain gauge responds to strain through change in what?
A Mass
B Temperature only
C Fluid pressure only
D Electrical resistance
Answer: D. Electrical resistance. Strain changes the length and cross-section of the resistive grid.
A Wheatstone bridge is used to measure small what?
A Length standards
B Resistance changes
C Surface angles
D Gear ratios
Answer: B. Resistance changes. A bridge circuit detects small resistance changes from sensors such as strain gauges.
A thermocouple generates voltage from what effect?
A Temperature difference
B Pressure difference
C Length change
D Magnetic field only
Answer: A. Temperature difference. The Seebeck effect produces a voltage related to the temperature difference between junctions.
An RTD measures temperature by change in what?
A Thermal radiation only
B Mass flow
C Electrical resistance
D Optical path
Answer: C. Electrical resistance. Resistance temperature detectors use predictable resistance change with temperature.
A pressure transducer converts pressure into what?
A Linear scale only
B Heat flux
C Torque directly
D Electrical signal
Answer: D. Electrical signal. A pressure transducer generates an electrical output related to pressure.
A load cell measures applied what?
A Force or weight
B Surface texture
C Temperature
D Frequency only
Answer: A. Force or weight. Load cells convert force into a measurable electrical output.
A tachometer measures rotational what?
A Speed
B Torque only
C Pressure
D Linear roughness
Answer: A. Speed. A tachometer measures rotational speed, often in revolutions per minute.
A dynamometer measures torque and what to determine power?
A Rotational speed
B Temperature
C Pressure
D Surface finish
Answer: A. Rotational speed. Power is calculated from measured torque and angular speed.
An accelerometer measures what motion quantity?
A Displacement only
B Acceleration
C Temperature
D Pressure
Answer: B. Acceleration. Accelerometers sense linear or vibratory acceleration.
Measurement uncertainty describes what about a result?
A Exact error sign
B Range of plausible values
C Instrument color
D Tolerance class only
Answer: B. Range of plausible values. Uncertainty quantifies doubt associated with a measurement result.
Repeatability uses the same instrument and what conditions?
A Different laboratories
B Different operators always
C Different standards
D Same measurement conditions
Answer: D. Same measurement conditions. Repeatability is agreement under the same method, operator, instrument and short time conditions.
Reproducibility considers changes in operator or what?
A Measurement conditions
B Nominal size only
C Product material only
D Scale units only
Answer: A. Measurement conditions. Reproducibility evaluates agreement when conditions such as operators or laboratories vary.
Instrument linearity compares response with what ideal behavior?
A Circular response
B Zero sensitivity
C Random output
D Straight-line relation
Answer: D. Straight-line relation. Linearity describes closeness of input-output response to a straight-line model.
Hysteresis means output depends on what?
A Input units only
B Direction of input change
C Instrument color
D Calibration date only
Answer: B. Direction of input change. Hysteresis is different indication at the same input depending on whether input is increasing or decreasing.
Instrument drift is gradual change in output with what?
A Length only
B Pressure only
C Time
D Operator height
Answer: C. Time. Drift is a slow change in instrument indication under stable conditions.
Bandwidth describes the range of what an instrument can follow?
A Signal frequencies
B Part dimensions
C Material hardness
D Calibration standards
Answer: A. Signal frequencies. Bandwidth is the frequency range over which instrument response remains adequate.
Sampling rate determines measurement observations per what?
A Unit length
B Unit time
C Unit mass
D Degree of rotation only
Answer: B. Unit time. Sampling rate is the number of samples acquired per unit time.
A constant zero offset is usually what error type?
A Systematic error
B Random error
C Gross error always
D Resolution error only
Answer: A. Systematic error. A zero offset biases readings consistently and is systematic.
Zero setting adjusts the instrument indication at what input?
A Full-scale input
B Zero input
C Half-scale input
D Maximum temperature
Answer: B. Zero input. Zeroing removes or compensates for offset at the zero reference.
Uncertainty propagation combines input uncertainties using what?
A Production schedule
B Tool geometry
C Measurement model
D Machine layout
Answer: C. Measurement model. Uncertainty propagation follows the mathematical relationship between measured inputs and output.
Resolution error becomes important when scale steps are what?
A Much smaller than tolerance
B Exactly calibrated
C Large relative to tolerance
D Independent of range
Answer: C. Large relative to tolerance. Coarse resolution can limit the ability to distinguish values within a tolerance.
A noncontact optical sensor avoids what?
A Need for calibration
B All measurement error
C Probe contact force
D Line-of-sight requirement
Answer: C. Probe contact force. Noncontact sensors measure without touching and therefore avoid contact-force effects.
Calibration intervals should reflect stability and what risk?
A Product color
B Machine age only
C Measurement impact
D Operator preference alone
Answer: C. Measurement impact. Calibration interval planning considers stability, use and consequences of incorrect measurement.
A sensor’s loading effect occurs when it changes what?
A Reference standard
B Scale resolution
C Calibration chain
D Measured system
Answer: D. Measured system. A measurement device can influence the quantity or system it is measuring.