The ideal Otto cycle adds heat at constant what?
A Pressure
B Volume
C Temperature
D Entropy
Answer: B. Volume. The air-standard Otto cycle models heat addition at constant volume.
The ideal Diesel cycle adds heat at constant what?
A Volume
B Pressure
C Temperature
D Entropy
Answer: B. Pressure. The air-standard Diesel cycle models heat addition at constant pressure.
The dual cycle adds heat at constant volume and what?
A Constant temperature
B Constant entropy
C Constant pressure
D Zero volume
Answer: C. Constant pressure. The dual cycle combines constant-volume and constant-pressure heat addition.
Ideal Otto efficiency increases as compression ratio what?
A Decreases
B Becomes zero
C Increases
D Equals one
Answer: C. Increases. For fixed specific-heat ratio, higher compression ratio raises ideal Otto efficiency.
Diesel-cycle cutoff ratio is volume after heat addition divided by what?
A Volume before heat addition
B Clearance volume
C Swept volume
D Exhaust volume
Answer: A. Volume before heat addition. Cutoff ratio compares cylinder volume at the end and start of constant-pressure heat addition.
Mean piston speed equals twice stroke times what?
A Bore diameter
B Revolutions per second
C Compression ratio
D Valve lift
Answer: B. Revolutions per second. Mean piston speed is 2LN when N is revolutions per second.
Engine shaft power equals torque times what?
A Piston area
B Angular speed
C Fuel density
D Compression ratio
Answer: B. Angular speed. Rotational power is P = Tω.
A dynamometer measures engine output torque and what?
A Speed
B Fuel octane
C Cylinder bore
D Coolant chemistry
Answer: A. Speed. A dynamometer measures torque and rotational speed to determine brake power.
A heat balance accounts for fuel energy entering and what?
A Only shaft torque
B Energy leaving engine
C Only air mass
D Only coolant volume
Answer: B. Energy leaving engine. A heat balance divides fuel energy among shaft work, exhaust, cooling and other losses.
Brake-specific fuel consumption decreases when fuel use per power does what?
A Increases
B Decreases
C Becomes infinite
D Equals engine speed
Answer: B. Decreases. Lower BSFC means less fuel is used for each unit of brake power.
A higher compression ratio generally improves ideal cycle efficiency but can raise what in SI engines?
A Knock tendency
B Coolant volume
C Fuel cetane number
D Bearing clearance
Answer: A. Knock tendency. Higher compression can increase end-gas temperature and knock tendency in spark-ignition engines.
A turbocharger can increase engine output by increasing what?
A Exhaust backpressure only
B Oil temperature
C Clearance volume
D Intake air density
Answer: D. Intake air density. Boosting packs more air mass into the cylinders, enabling greater fuel input.
Turbo lag is delay in boost response after what?
A Throttle demand
B Engine shutdown
C Coolant refill
D Oil change
Answer: A. Throttle demand. Turbo lag is the transient delay while exhaust flow accelerates the turbine.
A variable-geometry turbocharger changes what?
A Cylinder bore
B Fuel octane
C Turbine nozzle area
D Oil pump speed
Answer: C. Turbine nozzle area. Adjustable vane geometry changes effective turbine flow area.
Gasoline direct injection sprays fuel into what?
A Combustion chamber
B Radiator core
C Oil sump
D Exhaust manifold
Answer: A. Combustion chamber. GDI injectors deliver fuel directly into the cylinder.
Homogeneous charge compression ignition uses what for ignition?
A Spark plug only
B External flame
C Glow discharge always
D Compression heat
Answer: D. Compression heat. HCCI autoignites a premixed charge through compression heating.
Common-rail injection allows independent control of injection timing and what?
A Bore diameter
B Piston stroke
C Fuel quantity
D Coolant pressure
Answer: C. Fuel quantity. Electronic common-rail systems meter injection timing, pressure and quantity.
Biofuel can be produced from which renewable source?
A Iron ore
B Natural uranium
C Silica sand
D Biomass
Answer: D. Biomass. Biofuels are derived from biological material such as crops, residues or waste.
CNG engines use which main fuel?
A Compressed natural gas
B Liquid oxygen
C Diesel soot
D Water vapor
Answer: A. Compressed natural gas. CNG is natural gas stored under high pressure as a vehicle fuel.
Hydrogen combustion produces water and can also form what at high temperature?
A Sulfur dioxide only
B Lead particles
C Carbon soot always
D Nitrogen oxides
Answer: D. Nitrogen oxides. Hydrogen contains no carbon, but high-temperature combustion with air can form NOx.
A catalytic converter works most effectively after reaching what?
A Light-off temperature
B Freezing point
C Fuel flash point
D Critical pressure
Answer: A. Light-off temperature. Catalyst conversion efficiency rises after the substrate reaches operating light-off temperature.
Engine valve overlap can improve gas exchange at what condition?
A Engine stopped
B Zero exhaust flow
C Cold start only
D Higher engine speed
Answer: D. Higher engine speed. Overlap can aid scavenging at suitable speeds, though effects depend on design.
An engine air-standard cycle assumes working fluid is what?
A Fuel vapor only
B Liquid water
C Air throughout cycle
D Exhaust and coolant
Answer: C. Air throughout cycle. Air-standard analysis models the working fluid as air and replaces combustion with heat addition.
A hybrid powertrain can combine an engine with what?
A Steam condenser
B Hydraulic ram only
C Electric motor
D Mechanical governor only
Answer: C. Electric motor. Hybrid vehicles combine an internal-combustion engine with electric propulsion components.
Knock sensors detect engine-block vibration associated with what?
A Normal lubrication
B Coolant circulation
C Exhaust silencing
D Abnormal combustion
Answer: D. Abnormal combustion. Knock sensors detect vibration signatures and allow ignition adjustment to protect the engine.