A spark-ignition engine initiates combustion using what?
A Fuel injector only
B Compression heat only
C Glow plug always
D Spark plug
Answer: D. Spark plug. An SI engine ignites its premixed or directly injected charge with a spark.
A compression-ignition engine ignites fuel using what?
A Spark discharge
B Hot compressed air
C External flame
D Battery current
Answer: B. Hot compressed air. Compression raises air temperature enough to ignite injected fuel.
A four-stroke cycle requires how many crank revolutions?
A One revolution
B Three revolutions
C Four revolutions
D Two revolutions
Answer: D. Two revolutions. The intake, compression, power and exhaust strokes take two crankshaft revolutions.
A two-stroke engine completes a cycle in how many revolutions?
A One revolution
B Two revolutions
C Three revolutions
D Four revolutions
Answer: A. One revolution. A two-stroke engine completes its cycle every crankshaft revolution.
Swept volume is the volume displaced during which piston travel?
A One crank revolution always
B Valve overlap
C Clearance only
D One full stroke
Answer: D. One full stroke. Swept volume is the cylinder volume displaced as the piston moves between dead centers.
Clearance volume remains above the piston at which position?
A Top dead center
B Bottom dead center
C Mid-stroke
D Exhaust port only
Answer: A. Top dead center. Clearance volume is the space remaining when the piston is at top dead center.
Compression ratio equals total cylinder volume divided by what?
A Swept volume
B Bore area
C Fuel volume
D Clearance volume
Answer: D. Clearance volume. Compression ratio is (swept volume plus clearance volume) divided by clearance volume.
At top dead center, the piston is nearest to what?
A Crankshaft center
B Oil sump
C Exhaust outlet
D Cylinder head
Answer: D. Cylinder head. Top dead center is the piston position closest to the cylinder head.
At bottom dead center, piston volume is what?
A Minimum
B Zero
C Equal clearance volume
D Maximum
Answer: D. Maximum. The cylinder volume is maximum when the piston is at bottom dead center.
The cylinder bore is which dimension?
A Cylinder diameter
B Piston travel
C Valve lift
D Crank radius
Answer: A. Cylinder diameter. Bore is the internal cylinder diameter.
Engine stroke is the distance between what positions?
A Two valve seats
B Crank and cam centers
C Top and bottom dead centers
D Inlet and exhaust ports
Answer: C. Top and bottom dead centers. Stroke is the piston travel from TDC to BDC.
The piston mainly transmits gas force to what?
A Camshaft
B Connecting rod
C Radiator
D Fuel pump
Answer: B. Connecting rod. The piston transfers combustion force through the connecting rod to the crankshaft.
The connecting rod joins piston to what?
A Camshaft
B Cylinder head
C Crankshaft
D Flywheel housing
Answer: C. Crankshaft. The connecting rod transmits force between piston and crank.
The crankshaft converts reciprocating motion into what?
A Linear motion only
B Heat transfer
C Rotation
D Fuel pressure
Answer: C. Rotation. The crank mechanism converts piston reciprocation into rotary output.
The camshaft controls opening and closing of what?
A Pistons
B Bearings
C Valves
D Fuel tank
Answer: C. Valves. Cam lobes operate the engine valves at timed intervals.
Valve timing is specified relative to crankshaft what?
A Position
B Oil pressure
C Coolant temperature only
D Fuel density
Answer: A. Position. Valve events are timed to crank angle for proper gas exchange.
A carburetor traditionally prepares which mixture?
A Air and fuel
B Oil and coolant
C Exhaust and air
D Water and fuel
Answer: A. Air and fuel. A carburetor meters fuel into incoming air in conventional SI engines.
A fuel injector meters and sprays what?
A Lubricating oil
B Fuel
C Coolant
D Exhaust gas
Answer: B. Fuel. Injectors deliver a controlled fuel quantity into the intake or cylinder.
Octane number indicates resistance to what in SI engines?
A Corrosion
B Knock
C Diesel smoke
D Lubricant foaming
Answer: B. Knock. Higher octane fuels resist abnormal autoignition and knock in spark-ignition engines.
Cetane number indicates diesel fuel ignition what?
A Viscosity only
B Octane resistance
C Quality
D Lubricity only
Answer: C. Quality. Cetane number characterizes ignition quality and delay in compression-ignition engines.
Air-fuel ratio is air mass divided by what?
A Exhaust mass
B Coolant mass
C Fuel mass
D Cylinder volume
Answer: C. Fuel mass. Air-fuel ratio is the mass of inducted air divided by fuel mass.
Volumetric efficiency compares inducted air with what reference volume?
A Swept volume at inlet density
B Clearance volume
C Fuel tank capacity
D Exhaust volume
Answer: A. Swept volume at inlet density. Volumetric efficiency compares actual intake air with the amount filling swept volume at inlet conditions.
Indicated power is developed inside which region?
A Transmission gears
B Engine cylinders
C Fuel pump
D Radiator core
Answer: B. Engine cylinders. Indicated power is the power developed by gas pressure in the cylinders.
Brake power is measured at what engine location?
A Output shaft
B Piston crown
C Exhaust valve
D Fuel rail
Answer: A. Output shaft. Brake power is useful output power measured at the shaft or dynamometer.
Friction power equals indicated power minus what?
A Fuel power
B Brake power
C Cooling power
D Pump power
Answer: B. Brake power. Mechanical losses make friction power equal IP minus BP.