Brake thermal efficiency compares brake power with what?
A Indicated work only
B Fuel energy rate
C Cooling water flow
D Air mass only
Answer: B. Fuel energy rate. Brake thermal efficiency is brake output divided by fuel energy input rate.
Indicated thermal efficiency uses which output quantity?
A Indicated power
B Brake torque only
C Fuel mass only
D Cooling load
Answer: A. Indicated power. Indicated thermal efficiency compares cylinder-developed power with fuel energy rate.
Mechanical efficiency equals brake power divided by what?
A Indicated power
B Fuel power
C Friction power
D Exhaust heat
Answer: A. Indicated power. Mechanical efficiency is BP/IP.
Brake-specific fuel consumption is fuel flow divided by what?
A Brake power
B Indicated volume
C Air mass
D Cylinder count
Answer: A. Brake power. BSFC is fuel mass flow rate per unit brake power.
Mean effective pressure equals cycle work divided by what?
A Clearance volume
B Bore diameter
C Fuel mass
D Swept volume
Answer: D. Swept volume. Mean effective pressure is a hypothetical constant pressure producing the cycle work over swept volume.
Diesel ignition delay runs from injection start to what?
A Intake valve opening
B Exhaust closure
C Fuel pump stop
D Combustion start
Answer: D. Combustion start. Ignition delay is the interval between fuel injection and start of combustion.
SI engine knock is associated with autoignition of what?
A End gas
B Lubricating oil
C Exhaust gas
D Coolant vapor
Answer: A. End gas. Knock occurs when unburned end-gas autoignites ahead of the normal flame front.
Pre-ignition begins before what event?
A Scheduled spark
B Intake stroke
C Fuel delivery
D Exhaust opening
Answer: A. Scheduled spark. Pre-ignition is combustion initiated before the intended spark event.
The combustion chamber is where what occurs?
A Oil filtration
B Coolant circulation
C Exhaust silencing
D Fuel-air combustion
Answer: D. Fuel-air combustion. The chamber houses the burning fuel-air charge and combustion gases.
Normal SI combustion propagates mainly as what?
A Detonation wave always
B Flame front
C Liquid jet
D Compression wave only
Answer: B. Flame front. A spark-ignition flame front travels through the compressed charge.
Equivalence ratio equals stoichiometric AFR divided by what?
A Fuel heating value
B Actual AFR
C Compression ratio
D Exhaust ratio
Answer: B. Actual AFR. Equivalence ratio φ = (A/F)_stoich/(A/F)_actual.
A rich mixture has equivalence ratio what?
A Less than one
B Greater than one
C Equal to zero
D Exactly one-half
Answer: B. Greater than one. A rich mixture contains more fuel than the stoichiometric proportion, so φ>1.
A lean mixture has equivalence ratio what?
A Greater than two
B Exactly one
C Infinite
D Less than one
Answer: D. Less than one. A lean mixture has less fuel than stoichiometric, giving φ<1.
Exhaust gas recirculation can reduce which emissions?
A Carbon dioxide only
B Water vapor
C Nitrogen oxides
D Oxygen only
Answer: C. Nitrogen oxides. EGR lowers peak combustion temperatures and can reduce NOx formation.
Thermal NOx formation is promoted by high combustion what?
A Humidity only
B Lubricant level
C Temperature
D Fuel octane only
Answer: C. Temperature. High flame temperatures favor nitrogen-oxide formation.
Carbon monoxide is associated with what combustion condition?
A Complete oxidation
B Incomplete combustion
C Low cylinder pressure only
D High coolant flow
Answer: B. Incomplete combustion. CO forms when carbon oxidation is incomplete, often with insufficient oxygen or poor mixing.
Unburned hydrocarbons can result from what?
A Perfect mixing
B Complete oxidation
C Incomplete fuel combustion
D High oil pressure only
Answer: C. Incomplete fuel combustion. Unburned fuel and quenching contribute to hydrocarbon emissions.
A turbocharger turbine is driven by what?
A Exhaust gas
B Crankshaft belt
C Battery motor only
D Coolant pump
Answer: A. Exhaust gas. The exhaust turbine drives a compressor to boost intake air.
A mechanically driven supercharger receives power from what?
A Exhaust turbine only
B Engine crankshaft
C Radiator fan
D Fuel injector
Answer: B. Engine crankshaft. A supercharger is driven mechanically, commonly by a belt or gears from the engine.
An intercooler cools what after compression?
A Lubricating oil only
B Exhaust gas
C Coolant only
D Intake charge air
Answer: D. Intake charge air. Cooling compressed intake air increases density and reduces charge temperature.
Scavenging in a two-stroke engine removes what?
A Lubricant only
B Coolant vapor
C Fuel tank vapor
D Burned exhaust gas
Answer: D. Burned exhaust gas. Scavenging clears exhaust products and replaces them with fresh charge.
Valve overlap occurs when intake and exhaust valves are both what?
A Closed
B Removed
C Open
D At maximum lift always
Answer: C. Open. Valve overlap is the crank-angle interval with both valves open near TDC.
Ignition advance is measured relative to piston what?
A Bottom dead center
B Mid-stroke only
C Top dead center
D Valve lift
Answer: C. Top dead center. Spark timing is commonly specified in crank degrees before TDC.
Long diesel ignition delay tends to increase what?
A Coolant boiling point
B Oil viscosity
C Pressure-rise rate
D Valve clearance
Answer: C. Pressure-rise rate. More fuel can accumulate before ignition, causing a sharper premixed burn and pressure rise.
A diesel injector nozzle breaks fuel into what?
A Fine spray droplets
B Solid slugs
C Coolant mist
D Exhaust particles
Answer: A. Fine spray droplets. Atomization creates small droplets that evaporate and mix with hot air.