An open channel has a free surface exposed to…
A Vacuum only
B Atmospheric pressure
C Pipe pressure
D Solid boundary
Answer: B. Atmospheric pressure. Open-channel flow has a free surface at atmospheric pressure.
Hydraulic depth equals flow area divided by…
A Wetted perimeter
B Channel length
C Top width
D Bed slope
Answer: C. Top width. Hydraulic depth D = A/T, where T is the free-surface top width.
Hydraulic radius is flow area divided by…
A Wetted perimeter
B Top width
C Channel length
D Hydraulic depth
Answer: A. Wetted perimeter. Hydraulic radius R = A/P, with P the wetted perimeter.
A prismatic channel has…
A Changing shape at every station
B No bed slope
C A closed pressure pipe
D Constant cross-section along length
Answer: D. Constant cross-section along length. A prismatic channel has constant cross-sectional shape and bed slope along its length.
Uniform open-channel flow has…
A Changing depth at every point
B Zero velocity
C Constant depth along reach
D No free surface
Answer: C. Constant depth along reach. Uniform flow has constant depth and mean velocity along the channel reach.
Normal depth is associated with…
A Hydraulic jump
B Pump shutoff
C Critical pressure only
D Uniform flow
Answer: D. Uniform flow. Normal depth is the depth of uniform flow for a given channel and discharge.
Critical flow occurs at Froude number…
A 0
B 0.5
C 2
D 1
Answer: D. 1. Critical flow is the transition condition with Froude number equal to one.
Subcritical open-channel flow is generally…
A Shallow and rapid
B Always dry
C Deep and tranquil
D Pressure-driven only
Answer: C. Deep and tranquil. Subcritical flow has Froude number below one and gravity effects dominate.
Supercritical open-channel flow is generally…
A Shallow and rapid
B Deep and tranquil
C Always hydrostatic
D At zero velocity
Answer: A. Shallow and rapid. Supercritical flow has Froude number above one and inertia dominates.
Specific energy is measured relative to…
A Sea-level datum
B Channel bed
C Pipe centerline
D Atmospheric pressure
Answer: B. Channel bed. Specific energy is depth plus velocity head measured from the channel bottom.
A hydraulic jump is a transition from…
A Subcritical to supercritical flow
B Supercritical to subcritical flow
C Pipe to open flow
D Laminar to turbulent pipe flow
Answer: B. Supercritical to subcritical flow. A jump rapidly raises depth as fast supercritical flow becomes subcritical.
A hydraulic jump is useful for…
A Energy dissipation
B Increasing pump head
C Preventing all turbulence
D Reducing channel depth
Answer: A. Energy dissipation. The intense mixing in a hydraulic jump dissipates substantial energy.
Gradually varied flow changes depth…
A Instantly at one section
B Over a long distance
C Only inside a pump
D Only at a gate
Answer: B. Over a long distance. Gradually varied flow has depth changes over a relatively long channel reach.
Rapidly varied flow changes depth…
A Over a short distance
B Uniformly over long reach
C Only with closed pipes
D Without energy change
Answer: A. Over a short distance. Rapidly varied flow includes abrupt changes such as hydraulic jumps.
Manning’s equation is commonly used for…
A Hydrostatic force only
B Pump priming
C Turbine cavitation only
D Uniform open-channel flow
Answer: D. Uniform open-channel flow. Manning’s relation estimates mean velocity or discharge in uniform channel flow.
A pump adds energy to…
A The flowing fluid
B The foundation soil
C The channel lining
D The atmosphere only
Answer: A. The flowing fluid. A pump transfers mechanical energy to the fluid, increasing its total head.
A turbine converts fluid energy into…
A Shaft work
B Concrete strength
C Pressure loss only
D Surface tension
Answer: A. Shaft work. A turbine extracts hydraulic energy and delivers mechanical shaft power.
A centrifugal pump is a…
A Positive-displacement pump
B Impulse turbine
C Rotodynamic pump
D Open-channel control
Answer: C. Rotodynamic pump. A centrifugal pump uses a rotating impeller to add energy to fluid.
A reciprocating pump is a…
A Reaction turbine
B Axial-flow turbine
C Hydraulic jump
D Positive-displacement pump
Answer: D. Positive-displacement pump. A reciprocating pump displaces fluid using a moving piston or plunger.
A centrifugal pump usually needs priming because…
A Water is incompressible
B Air blocks liquid flow
C The impeller is too large
D The discharge valve is open
Answer: B. Air blocks liquid flow. Air in the casing prevents normal centrifugal pumping of liquid.
Pump cavitation begins when local pressure falls below…
A Atmospheric pressure always
B Vapor pressure
C Critical depth
D Stagnation pressure
Answer: B. Vapor pressure. Vapor cavities form when local liquid pressure falls below vapor pressure.
NPSH relates to…
A Pump suction pressure margin
B Turbine runner diameter only
C Channel roughness
D Beam deflection
Answer: A. Pump suction pressure margin. Net positive suction head helps assess suction-side cavitation risk.
A draft tube is used with…
A Pelton wheels only
B Reciprocating pumps
C Reaction turbines
D Open-channel weirs
Answer: C. Reaction turbines. A draft tube recovers pressure and helps discharge flow from a reaction turbine runner.
A Pelton wheel is an…
A Axial reaction turbine
B Centrifugal pump
C Impulse turbine
D Reciprocating turbine
Answer: C. Impulse turbine. A Pelton runner extracts energy from a high-speed free jet.
Kaplan turbines are generally…
A Impulse turbines
B Positive-displacement pumps
C Radial-flow pumps
D Axial-flow reaction turbines
Answer: D. Axial-flow reaction turbines. Kaplan turbines use axial flow and adjustable runner blades for lower-head applications.