Highway Engineering MCQs (Set-3)

In e+f=V^2/(127R), speed V is commonly measured in what?

A Metres per second
B Kilometres per minute
C Kilometres per hour
D Miles per day

A parabolic vertical curve is commonly used because it gives what?

A Constant pavement thickness
B Uniform rate of grade change
C Zero sight distance
D No vertical movement

The K-value of a vertical curve is curve length divided by what?

A Algebraic grade difference
B Road width
C Design speed
D Traffic density

A highway alignment should avoid unstable ground because it increases what?

A Construction and maintenance risk
B Free-flow speed
C Parking capacity
D Trip generation

A horizontal curve’s transition length should allow gradual change in what?

A Traffic volume
B Pavement color
C Roadside land use
D Lateral acceleration

Superelevation runoff is the length used to introduce what?

A A bridge expansion joint
B A traffic signal cycle
C Full pavement banking
D A pavement pothole

A design vehicle affects which geometric feature?

A Subgrade water content
B Turning radius
C Bitumen penetration
D Concrete curing time

A pavement’s structural number represents what?

A Road name length
B Traffic signal count
C Drainage opening size
D Layered structural capacity

Flexible pavement distributes wheel load mainly through what?

A Slab action only
B Layered grain interaction
C Suspension cables
D Arch thrust

Rigid pavement distributes load largely through what?

A Concrete slab action
B Loose aggregate only
C Bitumen flow
D Shoulder friction

A concrete pavement joint is provided to control what?

A Cracking and movement
B Traffic demand
C Road alignment
D Vehicle headway

Pumping in concrete pavement can eject what through joints?

A Bitumen binder
B Traffic signs
C Concrete aggregate only
D Water and fine material

A pavement’s fatigue design check relates to repeated load-induced what?

A Traffic sign visibility
B Roadside noise
C Tensile strain
D Water demand

A road safety audit is performed to identify what?

A Only pavement strength
B Only traffic volume
C Potential safety problems
D Only project cost

A median on a divided highway separates what?

A Opposing traffic streams
B Pavement layers
C Pedestrians from sidewalks
D Signal controllers

A shoulder rumble strip alerts drivers through what?

A Water spray
B Color fading
C Signal changes
D Vibration and sound

A climbing lane is considered on steep grades for what?

A Slow heavy vehicles
B Faster bicycles
C Pedestrian crossings
D Parking access

A passing lane can improve operation by reducing what?

A Pavement drainage
B Roadway elevation
C Following delay
D Bridge span

A channelized intersection uses islands to guide what?

A Soil compaction
B Vehicle paths
C Pavement curing
D Bridge loads

A grade-separated interchange avoids which type of crossing?

A Pavement joint
B Drainage flow
C At-grade conflict
D Lane marking

Highway capacity depends on road geometry and what else?

A Soil color
B Concrete slump
C Rainfall only
D Traffic and control conditions

Pavement condition surveys help prioritize what?

A Maintenance and rehabilitation
B Trip distribution
C Signal phasing
D Road alignment selection only

A skid-resistant surface mainly improves what?

A Roadway width
B Signal visibility
C Subgrade bearing capacity
D Tire-pavement friction

Roadside clear zones provide what for errant vehicles?

A A bus terminal
B Recovery space
C A pavement base
D A signal cycle

A highway drainage crossfall directs runoff toward what?

A Road centre only
B Roadside drainage system
C Bridge bearings
D Traffic signals