C Compression, heat addition, expansion, rejection
D Intake, lift, drag, landing
Answer: C. Compression, heat addition, expansion, rejection. The ideal Brayton cycle has isentropic compression and expansion with constant-pressure heat addition and rejection.
Compressor work does what to air total temperature?
A Raises it
B Lowers it
C Leaves it fixed
D Reduces it to zero
Answer: A. Raises it. Work input raises the compressed air’s total temperature.
How does combustor pressure loss affect engine performance?
A Raises compressor ratio automatically
B Reduces pressure available downstream
C Eliminates turbine work
D Increases inlet recovery
Answer: B. Reduces pressure available downstream. Combustor pressure loss leaves less total pressure for turbine and nozzle performance.
Turbine power must at least supply which demand?
A Wing lift
B Landing gear
C Cabin lighting only
D Compressor work
Answer: D. Compressor work. A gas generator turbine must drive its compressor and required accessories.
What thermodynamic process occurs through a turbine?
A Constant-volume fuel storage
B Isothermal compression
C Gas expansion producing work
D Air filtration
Answer: C. Gas expansion producing work. The turbine extracts work as hot gas expands through its stages.
Which turbine row rotates and delivers shaft torque?
A Stator vanes
B Rotor blades
C Combustor liner
D Inlet lip
Answer: B. Rotor blades. Turbine rotor blades extract gas energy and turn the shaft.
In an ideal Brayton cycle, thermal efficiency rises with what?
A Pressure ratio
B Fuel tank size
C Exhaust color
D Wing span
Answer: A. Pressure ratio. For fixed specific-heat ratio and ideal components, higher pressure ratio increases ideal Brayton efficiency.
A recuperator is useful when turbine exhaust is what?
A Colder than ambient
B At zero pressure
C Free of oxygen
D Hotter than compressor discharge
Answer: D. Hotter than compressor discharge. Regeneration can transfer heat when exhaust temperature exceeds compressor outlet temperature.
Intercooling between compressor stages primarily reduces what?
A Turbine inlet area
B Fuel heating value
C Compressor work
D Nozzle pressure
Answer: C. Compressor work. Cooling air between stages reduces the work required for further compression.
Reheating between turbine stages generally increases what?
A Turbine work
B Compressor pressure loss
C Inlet drag
D Fuel density
Answer: A. Turbine work. Reheat raises gas temperature before later expansion and can increase turbine work.
Corrected compressor speed accounts for inlet temperature and what?
A Wing loading
B Reference conditions
C Fuel viscosity only
D Nozzle diameter
Answer: B. Reference conditions. Corrected speed normalizes rotational speed for inlet total-temperature conditions.
What limits rapid spool acceleration?
A Wingtip clearance
B Landing distance
C Cabin temperature
D Rotor inertia and engine margins
Answer: D. Rotor inertia and engine margins. Spool inertia and surge or temperature limits constrain acceleration.
Why can turbine blade creep become a concern?
A Low fuel pressure alone
B Large bypass duct
C High temperature and stress
D Low ambient humidity
Answer: C. High temperature and stress. Creep is time-dependent deformation under sustained stress, accelerated by high temperature.
What does a thermal barrier coating do?
A Raises fuel pressure
B Insulates the metal surface
C Changes shaft speed
D Increases inlet drag
Answer: B. Insulates the metal surface. A thermal barrier coating reduces heat transfer into turbine metal.
Film cooling protects turbine blades using what?
A Cool air over the surface
B Fuel on the tip
C Oil through the nozzle
D Exhaust in the inlet
Answer: A. Cool air over the surface. Cool air forms a protective film along the hot blade surface.
Which failure mode can excessive turbine temperature accelerate?
A Wing flutter
B Fuel freezing
C Landing gear wear
D Creep damage
Answer: D. Creep damage. High temperature speeds creep and other hot-section material degradation.
Variable stator vanes help match a compressor across what?
A Fuel octane scale
B Aircraft seating rows
C Operating speed range
D Runway surface
Answer: C. Operating speed range. Variable stators improve compressor flow angles and matching over changing speeds.
Compressor surge can cause which system response?
A Steady pressure rise only
B Flow oscillation or reversal
C Fuel atomization
D No temperature change
Answer: B. Flow oscillation or reversal. Surge is an unstable compressor event with severe flow oscillations and possible reversal.
Increasing fuel-air ratio in a combustor generally raises what?
A Turbine entry temperature
B Inlet pressure recovery
C Fan diameter
D Oil viscosity
Answer: A. Turbine entry temperature. More fuel energy generally increases combustor exit temperature, within operating limits.
Which station pressure ratio describes nozzle expansion?
A Bypass ratio
B Gear ratio
C Compression ratio only
D Nozzle pressure ratio
Answer: D. Nozzle pressure ratio. Nozzle pressure ratio compares nozzle total pressure with ambient pressure.
Shaft output power equals torque multiplied by what?
A Air density
B Wing area
C Angular speed
D Fuel volume
Answer: C. Angular speed. Rotational power is shaft torque multiplied by angular velocity.
A gas turbine’s back-work ratio compares compressor work with what?
A Turbine work
B Fuel mass
C Nozzle area
D Inlet drag
Answer: A. Turbine work. Back-work ratio is compressor work divided by turbine work.
Specific fuel consumption for shaft output divides fuel flow by what?
A Inlet pressure
B Output power
C Exhaust speed
D Combustor area
Answer: B. Output power. Shaft specific fuel consumption is fuel flow per unit output power.
An open-cycle gas turbine discharges working fluid where?
A Back to the compressor inlet
B Into a sealed tank
C Into the fuel pump
D Into the surroundings
Answer: D. Into the surroundings. An open cycle exhausts combustion products after expansion.
For a turboshaft, what remains after compressor-driving turbine work?
A Power for the output shaft
B No gas energy
C Only inlet pressure
D A wing downwash
Answer: A. Power for the output shaft. A power turbine extracts remaining gas energy to drive the external shaft load.